SIST EN 60064:1995/A2:2004
(Amendment)Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
Glühlampen für den Hausgebrauch und ähnliche allgemeine Beleuchtungszwecke - Anforderungen an die Arbeitsweise
Lampes à filament de tungstène pour usage domestique et éclairage général similaire - Prescriptions de performances
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements - Amendment A2 (IEC 60064:1993/A2:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60064:1995/A2:2004
STANDARD
januar 2004
(istoveten EN 60064:1995/A2:2003)
Tungsten filament lamps for domestic and similar general lighting purposes -
Performance requirements - Amendment A2 (IEC 60064:1993/A2:2002)
ICS 29.140.20 Referenčna številka
SIST EN 60064:1995/A2:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60064/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2003
ICS 29.140.20
English version
Tungsten filament lamps for domestic
and similar general lighting purposes -
Performance requirements
(IEC 60064:1993/A2:2002, modified)
Lampes à filament de tungstène Glühlampen für den Hausgebrauch und
pour usage domestique ähnliche allgemeine Beleuchtungszwecke -
et éclairage général similaire - Anforderungen an die Arbeitsweise
Prescriptions de performances (IEC 60064:1993/A2:2002, modifiziert)
(CEI 60064:1993/A2:2002, modifié)
This amendment A2 modifies the European Standard EN 60064:1995; it was approved by CENELEC on
2002-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60064:1995/A2:2003 E
---------------------- Page: 2 ----------------------
EN 60064:1995/A2:2003 - 2 -
Foreword
The text of document 34A/1003/FDIS, future amendment 2 to IEC 60064:1993, prepared by SC 34A,
Lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel
vote. Together with the common modifications in EN 60064:1995, it was approved by CENELEC as
amendment A2 to EN 60064:1995 on 2002-12-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-09-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2005-12-01
__________
Endorsement notice
The text of amendment 2:2002 to the International Standard IEC 60064:1993 was approved by
CENELEC with agreed common modifications as given below.
COMMON MODIFICATIONS
Delete all references to E26/24 and E26/25 caps.
__________
---------------------- Page: 3 ----------------------
NORME CEI
INTERNATIONALE
IEC
60064
INTERNATIONAL
Sixième édition
STANDARD
Sixth edition
1993-11
Modifiée selon l'amendement 1 (2000) et l'amendement 2 (2002)
Amended in accordance with Amendment 1 (2000) and Amendment 2 (2002)
Lampes à filament de tungstène pour usage
domestique et éclairage général similaire –
Prescriptions de performances
Tungsten filament lamps for domestic and
similar general lighting purposes –
Performance requirements
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
---------------------- Page: 4 ----------------------
60064 Amend.2 IEC:2002 – 5 –
SECTION 7 : ANNEXES
Page
A Test procedure. 39
B Life calculation and limits. 45
C Recommended pre-compliance tests for certification purposes. 47
D Statistical compliance tables . 53
E Statistical concepts and basis of this standard . 61
F Test rack circuit characteristics . 63
SECTION 8 : LAMP DATA SHEETS
8.1 List of lamp data sheets and ILCOS codes . 65
---------------------- Page: 5 ----------------------
60064 Amend.2 IEC:2002 – 11 –
TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND
SIMILAR GENERAL LIGHTING PURPOSES
Performance requirements
Section 1: General
1.1 Scope
This International Standard applies to tungsten filament incandescent lamps for general
lighting service (GLS) which comply with the safety requirements in IEC 432-1 and having:
– rated wattage of 25 W to 200 W, inclusive;
– rated voltage 100 V to 250 V, including marked voltage range not exceeding ±2,5 % of the
)
1
mean voltage ;
– bulbs of the A or PS shapes;
– bulbs with clear, frosted or equivalently coated finishes, or white finishes;
– caps B22d, E26 or E27.
Specific lamp types are covered in section 8.
This standard states the performance requirements for lamps, including test methods and
means of confirming compliance with the requirements. Whole production appraisal methods
regarding a lamp manufacturer's test record on finished products are defined. This method
can be applied for certification purposes. Details of a batch test procedure, which can be used
to make an assessment of specific batches, are included, but it is not suitable for certification
purposes.
For some of the requirements given in this standard reference is made to "the relevant data
sheet". For some lamps these data sheets are contained in this standard. For other lamps,
falling under the scope of this standard, the relevant data are supplied by the lamp
manufacturer or responsible vendor.
NOTES
1 A lamp used in China having a rated wattage 15 W and rated voltage 220 V is included.
2 Separate references are made to E26/24 caps used in North America and E26/25 caps used in Japan. The two
are not compatible.
1.2 Normative references
The following normative documents contain provisions, which, through reference in this text,
constitute provisions of this International Standard. At the time of publication, the editions
indicated were valid. All normative documents are subject to revision, and parties to
agreements based on this International Standard are encouraged to investigate the possibility
of applying the most recent editions of the normative documents listed below. Members of IEC
and ISO maintain registers of currently valid International Standards.
———————
)
1
In countries in the process of changing from 220 V to 230 V nominal supply voltage, a range of ±3,5 % will
apply temporarily.
---------------------- Page: 6 ----------------------
60064 Amend.2 IEC:2002 – 21 –
3.3 Lamp dimensions
3.3.1 Lamps shall comply with the dimensional requirements specified on the appropriate
lamp data sheet.
3.3.2 Lamps with E27 caps shall comply with the gauge for testing contact-making, sheet
7006-50 of IEC 60061-3
3.3.3 Lamps with E26 caps shall comply with the gauge for testing contact-making, sheet
7006-29 of IEC 60061-3.
3.4 Characteristics and tolerances of initial readings
3.4.1 Wattage
The initial wattage of individual lamps shall not exceed 104 % of the rated wattage specified
on the relevant lamp data sheet plus 0,5 W.
3.4.2 Luminous flux initial
3.4.2.1 Rated luminous flux of the lamps shall not be less than the values shown on the
relevant lamp data sheet.
3.4.2.2 The initial luminous flux readings of individual frosted, frosted equivalently coated or
clear lamps shall not be less than 93 % of the rated luminous flux.
3.4.2.3 The initial luminous flux readings of individual white-coated lamps shall not be less
than 90 % of the rated luminous flux.
3.5 Lumen maintenance
The lumen maintenance of individual lamps at 75 % of rated life shall be not less than the
minimum value specified on the relevant lamp data sheet.
NOTES
1 For the compliance conditions of subclauses 4.1.2.6, 4.1.3.3 and 4.2.3, lamps that do not satisfy this
requirement are treated as life failures.
2 In some countries, particularly North America, manufacturers' records may yield data at 70 % of rated life rather
than the defined 75 % of rated life. This is due to long-established domestic and regulatory practices. Such data
will have to be linearly extrapolated to the 75 % point.
3.6 Life test requirements
3.6.1 The truncated average life of a normal life test or the equivalent truncated average life
of an accelerated life test, calculated by the method of subclause B.1.1 of annex B, shall be
equal to or greater than the limits in subclause B.1.2, as related to rated life and the LTQ.
3.6.2 Individual lamps shall have a life of not less than 70 % of rated life.
---------------------- Page: 7 ----------------------
60064 Amend.2 IEC:2002 – 65 –
Section 8: Lamp data sheets
8.1 List of lamp data sheets and ILCOS codes
As additional information this table shows for each data sheet the ILCOS codes according to
)
2
IEC/TS 61231 .
NOTE 1 The code does not give all the technical characteristics necessary to specify a lamp fully, but
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.