SIST EN 3355:2012

Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa

This European Standard specifies the requirements relating to: Titanium alloy TI-P64001 (Ti-6Al-4V) Annealed Extruded section De ≤ 150 mm 900 MPa ≤ Rm ≤ 1 160 MPa.

Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglüht - Strangpreßprofile - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa

Diese Norm legt die Anforderungen an
Titanlegierung TI-P64001 (Ti-6Al-4V)
Geglüht
Strangpressprofile
De 900 MPa  zur Anwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Profilés filés - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa

Cette Norme européenne spécifie les exigences relatives à :
Alliage de titane TI-P64001 (Ti-6Al-4V)
Recuit
Profilés filés
De < ou = 150 mm
900 MPa < ou = Rm < ou = 1 160 MPa
pour applications aérospatiales.

Aeronavtika - Titanova zlitina TI-P64001 (Ti-6Al-4V) - Žarjeno - Ekstrudirani profili - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1160 MPa

Ta evropski standard določa zahteve glede: titanove zlitine TI-P64001 (Ti-6Al-4V), žarjene, ekstrudirani profili De ≤ 150 mm 900 MPa ≤ Rm ≤ 1 160 MPa.

General Information

• Status: Published
• Publication Date: 16-Jul-2012
• ICS: 49.025.30 - Titanium
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 05-Jul-2012
• Due Date: 09-Sep-2012
• Completion Date: 17-Jul-2012
• Ref Project: EN 3355:2012 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 3355:2012SIST EN 3355:2012en,fr,de01-september-2012SIST EN 3355:2012SLOVENSKI
STANDARD



SIST EN 3355:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3355
March 2012 ICS 49.025.30 English Version
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa
Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Profilés filés - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa
Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglüht - Strangpreßprofile - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa This European Standard was approved by CEN on 24 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3355:2012: ESIST EN 3355:2012



EN 3355:2012 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .5 SIST EN 3355:2012



EN 3355:2012 (E) 3 Foreword This document (EN 3355:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
...