SIST EN 13827:2004
(Main)Steel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords
Steel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords
This European Standard specifies methods for the determination of the mean lateral displacement between cords, and for the determination of the vertical displacement of cords relative to a mean level of steel cords within a conveyor belt as described in prEN ISO 15236-1.
Stahlseil-Fördergurte - Prüfung der horizontalen und vertikalen Lage der Stahlseile
Diese Europäische Norm legt Verfahren fest zur Bestimmung der mittleren seitlichen Verschiebung zwischen den Seilen und zur Bestimmung der senkrechten Verschiebung der Seile bezogen auf eine mittlere Höhe der Stahlseile in einem Fördergurt, wie er in prEN ISO 15236-1 beschrieben ist.
Courroies transporteuses a carcasse métallique - Détermination du déplacement latéral et vertical des câbles d'acier
La présente Norme européenne décrit les méthodes de détermination du déplacement moyen latéral entre les câbles et de détermination du déplacement vertical des câbles par rapport a un niveau moyen de disposition des câbles d'acier dans une courroie transporteuse comme décrit dans le prEN ISO 15236-1.
Trakovi tračnih transporterjev z jeklenim vložkom – Preverjanje vodoravnega in navpičnega položaja jeklenega vložka
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahlseil-Fördergurte - Prüfung der horizontalen und vertikalen Lage der StahlseileCourroies transporteuses a carcasse métallique - Détermination du déplacement latéral et vertical des câbles d'acierSteel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords53.040.20Deli za transporterjeComponents for conveyorsICS:Ta slovenski standard je istoveten z:EN 13827:2003SIST EN 13827:2004en01-junij-2004SIST EN 13827:2004SLOVENSKI
STANDARD
SIST EN 13827:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13827December 2003ICS 53.040.20English versionSteel cord conveyor belts - Determination of the lateral andvertical displacement of steel cordsCourroies transporteuses à carcasse métallique -Détermination du déplacement latéral et vertical des câblesd'acierStahlseil-Fördergurte - Prüfung der horizontalen undvertikalen Lage der StahlseileThis European Standard was approved by CEN on 3 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13827:2003: ESIST EN 13827:2004
EN 13827:2003 (E)2ContentsPageForeword.31Scope.42Normative references.43Method A. Determination of cord pitch and supported belt width.44Method B. Determination of the vertical
displacement of cords relative to a mean level.65Test report.8Bibliography.9SIST EN 13827:2004
EN 13827:2003 (E)3ForewordThis document (EN 13827:2003) has been prepared by Technical Committee CEN/TC 188 “Conveyor belts”,the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn atthe latest by June 2004.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13827:2004
EN 13827:2003 (E)41 ScopeThis European Standard specifies methods for the determination of the mean lateral displacement betweencords, and for the determination of the vertical displacement of cords relative to a mean level of steel cordswithin a conveyor belt as described in prEN ISO 15236-1.2 Normative referencesNot applicable.3 Method A. Determination of cord pitch and supported belt width3.1 ApparatusNOTEIf there are other measuring tools with the same or better precision these can also be used.3.1.1Measuring tape, graduated in divisions of 1,0 mm.3.1.2Hand held optical magnifier, incorporating a scale graduated in divisions of 0,1 mm and having amagnification of not less than x8.3.1.3Dial gauge micrometer, graduated in divisions of 0,1 mm.3.1.4Flat horizontal surface to support the full width of the conveyor belt.3.2 Test pieceThe test piece shall be of full belt width and not less than 50 mm long. The cut edges shall be smooth, free ofcontaminat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.