SIST I-ETS 300 113 E1:2003

Radio Equipment and Systems (RES); Land mobile service; Technical characteristics and test conditions for non-speech and combined analogue speech/non-speech equipment with an internal or external antenna connector, intended for the transmission of data

Covers data equipment (both data only and combined speech/non-speech equipment)

Radijska oprema in sistemi (RES) – Kopenska mobilna storitev – Tehnične karakteristike in preskusni pogoji za negovorno in kombinirano analogno govorno/negovorno opremo z notranjim ali zunanjim antenskim konektorjem za prenos podatkov

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.060.99 - Other equipment for radiocommunications
• ICS: 33.070.01 - Mobile services in general
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI I-ETS 300 113 ed.1 (1992-01) - Radio Equipment and Systems (RES); Land mobile service; Technical characteristics and test conditions for non-speech and combined analogue speech/non-speech equipment with an internal or external antenna connector, intended for the transmission of data

Standards Content (Sample)

SLOVENSKI STANDARD
SIST I-ETS 300 113 E1:2003
01-december-2003
5DGLMVNDRSUHPDLQVLVWHPL5(6±.RSHQVNDPRELOQDVWRULWHY±7HKQLþQH
NDUDNWHULVWLNHLQSUHVNXVQLSRJRML]DQHJRYRUQRLQNRPELQLUDQRDQDORJQR
JRYRUQRQHJRYRUQRRSUHPR]QRWUDQMLPDOL]XQDQMLPDQWHQVNLPNRQHNWRUMHP]D
SUHQRVSRGDWNRY
Radio Equipment and Systems (RES); Land mobile service; Technical characteristics
and test conditions for non-speech and combined analogue speech/non-speech
equipment with an internal or external antenna connector, intended for the transmission
of data
Ta slovenski standard je istoveten z: I-ETS 300 113 Edition 1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.070.01 Mobilni servisi na splošno Mobile services in general
SIST I-ETS 300 113 E1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST I-ETS 300 113 E1:2003

---------------------- Page: 2 ----------------------

SIST I-ETS 300 113 E1:2003
INTERIM
EUROPEAN I-ETS 300 113
TELECOMMUNICATION January 1992
STANDARD
Source: ETSI TC-RES Reference: I-ETS[A]
ICS: 33.060.20, 33.060.30
Land mobile radio, responses, testing
Key words:
Radio Equipment and Systems (RES);
Land mobile service
Technical characteristics and test conditions for non - speech
and combined analogue speech/non-speech equipment with
an internal or external antenna connector intended for
the transmission of data
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1992. All rights reserved.
New presentation - see History box

---------------------- Page: 3 ----------------------

SIST I-ETS 300 113 E1:2003
Page 2
I-ETS 300 113: January 1992
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST I-ETS 300 113 E1:2003
Page 3
I-ETS 300 113: January 1992
Contents
Foreword.9
Introduction . 10
1 Scope . 11
2 Normative references . 12
3 Definitions, abbreviations and symbols . 13
3.1 Definitions. 13
3.2 Abbreviations. 14
3.3 Symbols. 14
4 General . 15
4.1 Presentation of equipment for testing purposes . 15
4.1.1 Choice of model for type testing . 15
4.1.2 Definitions of alignment range and switching range. 15
4.1.3 Definition of the categories of the alignment range (AR1 and AR2). 15
4.1.4 Choice of frequencies . 16
4.1.5 Testing of single channel equipment of category AR1. 16
4.1.6 Testing of single channel equipment of category AR2. 16
4.1.7 Testing of two channel equipment of category AR1. 16
4.1.8 Testing of two channel equipment of category AR2. 16
4.1.9 Testing of multi channel equipment (more than two channels) of category
AR1 . 17
4.1.10 Testing of multi channel equipment (more than two channels) of category
AR2 (switching range less than the alignment range). 17
4.1.11 Testing of multi channel equipment (more than two channels) of category
AR2 (switching range equals the alignment range) . 17
4.1.12 Testing of equipment without an external 50 Ω RF connector. 18
4.1.12.1 Equipment with an internal permanent or temporary
antenna connector . 18
4.1.12.2 Equipment with a temporary antenna connector . 18
4.2 Mechanical and electrical design . 18
4.2.1 General . 18
4.2.2 Controls. 18
4.2.3 Marking. 18
4.2.4 Interpretation of the measurement results . 18
5 Technical characteristics. 19
5.1 Transmitter parameter limits . 19
5.1.1 Frequency error . 19
5.1.2 Carrier power (conducted) . 19
5.1.3 Effective radiated power. 20
5.1.4 Adjacent channel power. 20
5.1.5 Spurious emissions. 20
5.1.6 Intermodulation attenuation . 21
5.1.7 Transmitter attack time. 21
5.1.8 Transmitter release time. 21
5.1.9 Transient behaviour of the transmitter . 21
5.2 Receiver parameter limits . 21
5.2.1 Maximum usable sensitivity (data, conducted). 21
5.2.2 Maximum usable sensitivity (data, field strength). 22

---------------------- Page: 5 ----------------------

SIST I-ETS 300 113 E1:2003
Page 4
I-ETS 300 113: January 1992
5.2.3 Bit error rate in normal operation .22
5.2.4 Co-channel rejection .22
5.2.5 Adjacent channel selectivity.22
5.2.6 Spurious response rejection .22
5.2.7 Intermodulation response.23
5.2.8 Blocking or desensitisation .23
5.2.9 Spurious radiations .23
5.2.10 Carrier sense delay . 23
5.2.11 Receiver opening delay.23
5.3 Duplex operation - receiver limits .24
5.3.1 Receiver desensitisation and maximum usable sensitivity (with
simultaneous transmission and reception).24
5.3.2 Receiver spurious response rejection .24
6 Test conditions, power sources and ambient temperatures.24
6.1 Normal and extreme test conditions .24
6.2 Test power source .24
6.3 Normal test conditions .25
6.3.1 Normal temperature and humidity.25
6.3.2 Normal test power source. 25
6.3.2.1 Mains voltage . 25
6.3.2.2 Regulated lead-acid battery power sources used on
vehicles.25
6.3.2.3 Other power sources . 25
6.4 Extreme test conditions.25
6.4.1 Extreme temperatures .25
6.4.2 Extreme test source voltages .25
6.4.2.1 Mains voltage . 25
6.4.2.2 Regulated lead-acid battery power sources on vehicles .26
6.4.2.3 Power sources using other types of batteries.26
6.4.2.4 Other power sources . 26
6.5 Procedure for tests at extreme temperatures .26
6.5.1 Procedure for equipment designed for continuous operation.26
6.5.2 Procedure for equipment designed for intermittent operation.26
7 General conditions.27
7.1 Arrangements for test signals applied to the receiver input .27
7.2 Receiver mute or squelch facility.27
7.3 Normal test signal and normal test modulation .27
7.4 Encoder for receiver measurements .28
7.5 Transceiver data interface.28
7.6 Impedance.28
7.7 Artificial antenna.28
7.8 Tests of equipment with a duplex filter .28
7.9 Facilities for access.28
7.9.1 Analogue access .28
7.9.2 Raw bit stream access .28
7.9.3 Coupling arrangements .28
7.9.3.1 Arrangements for measurements with continuous bit
streams .29
7.9.3.2 Arrangements for measurements with messages .29
7.10 Test site and general arrangements for measurements involving the use of radiated
fields .29
7.11 Modes of operation of the transmitter .29
8 Methods of measurement for transmitter parameters. 29
8.1 Frequency error .29
8.1.1 Definition.29
8.1.2 Method of measurement .29
8.2 Carrier power (conducted) .29

---------------------- Page: 6 ----------------------

SIST I-ETS 300 113 E1:2003
Page 5
I-ETS 300 113: January 1992
8.2.2 Method of measurement . 30
8.3 Effective radiated power (field strength). 30
8.3.1 Definition . 30
8.3.2 Method of measurement . 30
8.4 Maximum permissible frequency deviation. 31
8.4.1 Definition . 31
8.4.2 Method of measurement . 31
8.5 Adjacent channel power. 32
8.5.1 Definition . 32
8.5.2 Method of measurement . 32
8.6 Spurious emissions. 33
8.6.1 Definition . 33
8.6.2 Method of measuring the power level. 33
8.6.3 Method of measuring the effective radiated power. 33
8.7 Intermodulation attenuation . 34
8.7.1 Definition . 34
8.7.2 Method of measurement . 34
8.8 Transmitter attack time. 35
8.8.1 Definition . 35
8.8.2 Method of measurement . 35
8.9 Transmitter release time. 36
8.9.1 Definition . 36
8.9.2 Method of measurement . 36
8.10 Transient behaviour of the transmitter. 36
8.10.1 Definitions. 37
8.10.2 Timings, frequencies and powers. 38
8.10.3 Methods of measurement . 42
8.10.3.1 Time and frequency domain analysis measurements. 42
8.10.3.2 Test arrangement and characteristics of the test
discriminator. 42
8.10.3.3 Adjacent channel power transient measurements . 43
8.10.3.4 Characteristics of the adjacent channel transient power
measuring device. 43
9 Methods of measurement for receiver parameters. 44
9.1 Maximum usable sensitivity (data, conducted) . 44
9.1.1 Definition . 44
9.1.2 Method of measurement with continuous bit streams. 44
9.1.3 Method of measurement with messages . 44
9.2 Maximum usable sensitivity (data, field strength). 45
9.2.1 Definition . 45
9.2.2 Method of measurement with continuous bit streams. 45
9.2.2.1 Test conditions . 45
9.2.2.2 Test procedure. 45
9.2.3 Method of measurement with messages . 46
9.2.3.1 Test conditions . 46
9.2.3.2 Test procedure. 46
9.3 Level of the wanted signal for the degradation measurements (data) . 47
9.3.1 Definition . 47
9.3.2 Defined level. 47
9.3.3 Relations between the results of measurements using continuous bit
streams and messages. 47
9.4 Bit error rate in normal operation. 47
9.4.1 Definition . 47
9.4.2 Method of measurement . 48
9.5 Co-channel rejection. 48
9.5.1 Definition . 48
9.5.2 Method of measurement with continuous bit streams. 48
9.5.3 Method of measurement with messages . 48

---------------------- Page: 7 ----------------------

SIST I-ETS 300 113 E1:2003
Page 6
I-ETS 300 113: January 1992
9.6 Adjacent channel selectivity.49
9.6.1 Definition.49
9.6.2 Method of measurement with continuous bit streams. 49
9.6.3 Method of measurement with messages .50
9.7 Spurious response rejection .51
9.7.1 Definition.51
9.7.2 Introduction to the method of measurement .51
9.7.3 Method of search over the "limited frequency range" . 52
9.7.4 Method of measurement with continuous bit streams. 52
9.7.5 Method of measurement with messages .53
9.8 Intermodulation response.54
9.8.1 Definition.54
9.8.2 Method of measurement with continuous bit streams. 54
9.8.3 Method of measurement with messages .54
9.9 Blocking or desensitisation.55
9.9.1 Definition.55
9.9.2 Method of measurement with continuous bit streams. 56
9.9.3 Method of measurement with messages .56
9.10 Spurious radiations.57
9.10.1 Definition.57
9.10.2 Method of measuring the power level.57
9.10.3 Method of measuring the effective radiated power.57
10 Duplex operation .58
10.1 Receiver desensitisation with simultaneous transmission and reception.58
10.1.1 Definition.58
10.1.2 Method of measurement when the equipment has a duplex filter .58
10.1.3 Measuring method when the equipment has to operate with two antennae. 58
10.2 Receiver spurious response rejection.58
11 Measurement uncertainty .60
Annex A (normative): Radiated measurements.61
A.1 Test site and general arrangements for measurements involving the use of radiated fields .61
A.1.1 Test site.61
A.1.2 Test antenna.61
A.1.3 Substitution antenna .62
A.1.4 Optional additional indoor site.62
A.2 Guidance on the use of radiation test sites .63
A.2.1 Measuring distance .63
A.2.2 Test antenna.63
A.2.3 Substitution antenna .63
A.2.4 Artificial antenna.63
A.2.5 Auxiliary cables .64
A.2.6 Acoustic measuring arrangement.64
A.3 Further optional alternative indoor site using an anechoic chamber .64
A.3.1 Example of the construction of a shielded anechoic chamber .64
A.3.2 Influence of parasitic reflections in anechoic chambers.65
A.3.3 Calibration of the shielded anechoic chamber .65
Annex B (normative): Specification for some particular measurement arrangements.68
B.1 Power measuring receiver specification.68
B.1.1 IF filter .68
B.1.2 Attenuation indicator.69
B.1.3 rms value indicator .69
B.1.4 Oscillator and amplifier . 69

---------------------- Page: 8 ----------------------

SIST I-ETS 300 113 E1:2003
Page 7
I-ETS 300 113: January 1992
B.2 Spectrum analyser specification . 69
B.3 Integrating and power summing device. 69
Annex C (informative): Graphic representation of the selection of equipment and frequencies for
testing. 71
Annex D (informative): Identification . 73
D.1 Scope . 73
D.2 General. 73
D.3 Position of the identification code. 73
D.3.1 Base stations. 73
D.3.1.1 System without windows. 73
D.3.1.2 Systems with windows. 74
D.3.2 Mobile stations. 74
D.4 Bit rates and modulations. 74
D.5 Format of the identification. 75
D.6 Synchronisation. 75
D.7 Code and block length . 75
D.8 Contents of the identification block. 76
D.8.1 Header. 76
D.8.2 Country code . 76
D.8.3 National Information. 77
D.8.3.1 Field description. 77
D.8.3.2 Field size options. 78
D.8.3.3 Options for the organisation of the fields . 78
D.8.3.4 Examples of user/system information usage. 79
D.9 Combinations. 79
D.9.1 List of possible combinations. 79
D.9.2 Relations between country code and allowed combinations . 80
D.9.3 Interpretation of the fields of the ID block. 81
Annex E (informative): Information on modulation, coding and format. 82
Annex F (normative): Access protocol and occupation rules for the transmission of data on shared
...