SIST EN ISO 3451-5:2000

Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:1989)

Kunststoffe - Bestimmung der Asche - Teil 5: Poly(vinylchlorid) (ISO 3451-5:1989)

Diese Norm legt zwei Verfahren zur Bestimmung der Asche von Poly(vinylchloride) fest. Die allgemeinen Verfahren in ISO 3451/1 werden befolgt - Verfahren A (Asche) oder Verfahren B (Sulfatasche). Diese Verfahren sind anwendbar für Härze, Mischungen und Fertigteile.

Plastiques - Détermination du taux de cendres - Partie 5: Poly(chlorure de vinyle) (ISO 3451-5:1989)

Polimerni materiali - Določevanje pepela - 5. del: Polivinilklorid (ISO 3451-5:1989)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2000
• Withdrawal Date: 30-Apr-2003
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-May-2003
• Due Date: 01-May-2003
• Completion Date: 01-May-2003
• Ref Project: EN ISO 3451-5:1996 - Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:1989)

Relations

• Replaced By: SIST EN ISO 3451-5:2003 - Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002)
• Effective Date: 01-May-2003

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3451-5:2000
01-maj-2000
3ROLPHUQLPDWHULDOL'RORþHYDQMHSHSHODGHO3ROLYLQLONORULG,62
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:1989)
Kunststoffe - Bestimmung der Asche - Teil 5: Poly(vinylchlorid) (ISO 3451-5:1989)
Plastiques - Détermination du taux de cendres - Partie 5: Poly(chlorure de vinyle) (ISO
3451-5:1989)
Ta slovenski standard je istoveten z: EN ISO 3451-5:1996
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 3451-5:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3451-5:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 3451-5:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 3451-5:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 3451-5:2000
ISO
INTERNATIONAL
3451-5
STANDARD
First edition
1989-09-15
- Determination of ash -
Plastics
Part 5 :
Poly(vinyl chloride)
- Determination du taux de cendres -
Was fiques
Partie 5 : Poly(chlorure de vinyle)
Reference number
ISO 3451-5: 19891 E)

---------------------- Page: 5 ----------------------

SIST EN ISO 3451-5:2000
ISO 345%5:1989(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for approval before their acceptance
as International Standards by the ISO Council. They are approved in
accordance with ISO procedures requiring at least 75 % approval by the
member bodies voting.
International Standard ISO 3451-5 was prepared by Technical Committee
ISO/TC 61, Plastics.
ISO 3451 consists of the following Parts, under the general title
Plastics - Determination of ash:
- Part i: General methods
- Part 2: Polyalkylene terephthalates
- Part 3: Unplasticized cellulose acetate
- Part 4: Polyamides
- Part 5: Po/y(vinyl chloride)
0 ISO 1989
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, eiectronic or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzeriand
Printed In Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 3451-5:2000
INTERNATIONAL STANDARD ISO 3451=5:1989(E)
- Determination of ash -
Plastics
Part 5 :
Poly(vinyl chloride)
- Poiy(viny1 chioride) evoives hydrogen
WARNING
chioride an thermal decomposition, and precautions
Calcination, with sulfuric acid treatment after com-
shouid be taken to avoid inhaiation of fumes.
bustion, i.e. by burning the substance and trans-
forming the residue into sulfates using concentrated
sulfuric acid and, finally, heating the residue at
1 Scope
850 “C until constant mass is reached. Should lead
compounds be present, method B is recommended.
This part of ISO 3451 specifies two methods for the
determination of the ash of poly(vinyl chloride). The
general procedures given in ISO 3453-1 are
4 Reagents (for method B only)
followed - method A (ash) or method B (sulfated
ash). These methods may be used for resins, com-
4.1 Suifuric acid, p 1,84 g/ml, of recognized ana-
positions and finished products.
lytical grade.
5 Apparatus
2 Normative reference
Apparatus specified in ISO 3451-1, and in particular:
The following Standard contains provisions which,
through reference in this text, constitute provisions
5.1 Crucibie of siiica or platinum, diameter of upper
of this part of ISO 3451. At the time of publication,
part 45 mm to 75 mm, height equal to the diameter.
the edition indicated was valid. All Standards are
The size shall be sufficient so that the crucible is no
subject to revision, and Parties to agreements based
more than half-filled by the test Portion.
on this patt of ISO 3451 ar
...