Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods

This European Standard specifies requirements for the manufacture; performance and testing of panic exit devices mechanically operated by a horizontal bar, for the purpose of achieving a safe exit under a panic situation on escape routes.
This European Standard covers panic exit devices which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and subsequently placed on the market as a kit in a single transaction.

Schlösser und Baubeschläge - Paniktürverschlüsse mit horizontaler Betätigungsstange für Türen in Rettungswegen - Anforderungen und Prüfverfahren

Diese Europäische Norm legt Anforderungen an Herstellung, Gebrauchstauglichkeit und Prüfung von Paniktürverschlüssen fest, die mechanisch über eine horizontale Stange betätigt werden, und die speziell für die Benutzung in Paniksituationen in Fluchtwegen ausgelegt sind.
Diese Europäische Norm behandelt Paniktürverschlüsse, die entweder insgesamt durch einen Hersteller gefertigt und in Verkehr gebracht oder durch mehr als einen Hersteller gefertigt und anschließend in einem Vorgang als Montagesatz in Verkehr gebracht werden.

Quincaillerie pour le bâtiment - Fermetures anti-panique manoeuvrées par une barre horizontale, pour portes situées sur les voies d'evacuation - Prescriptions et méthodes d'essais

La présente Norme européenne spécifie les exigences pour la fabrication, les performances et les essais des fermetures anti-panique manoeuvrées mécaniquement par une barre horizontale dans le but d'assurer une évacuation en toute sécurité dans une situation de panique sur des voies d'évacuation.
La présente Norme européenne couvre les fermetures anti-panique qui sont soit fabriquées et mises sur le marché dans leur intégralité par un fabricant, soit assemblées à partir de sous-assemblages produits par plus d'un fabricant et ultérieurement mises sur le marché en tant que kit au cours d'une transaction unique.

Ključavnice in stavbno okovje - Zapore z vodoravnim potisnim drogom za izhod ob paniki - Zahteve in preskusne metode

General Information

Status
Not Published
Public Enquiry End Date
04-Feb-2015
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
22-Apr-2024
Due Date
27-Apr-2024
Completion Date
22-Apr-2024

Relations

Buy Standard

Draft
prEN 1125:2015 - BARVE
English language
62 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 1125:2015
01-januar-2015
.OMXþDYQLFHLQVWDYEQRRNRYMH=DSRUH]YRGRUDYQLPSRWLVQLPGURJRP]DL]KRGRE
SDQLNL=DKWHYHLQSUHVNXVQHPHWRGH
Building hardware - Panic exit devices operated by a horizontal bar, for use on escape
routes - Requirements and test methods
Schlösser und Baubeschläge - Paniktürverschlüsse mit horizontaler Betätigungsstange
für Türen in Rettungswegen - Anforderungen und Prüfverfahren
Quincaillerie pour le bâtiment - Fermetures anti-panique manoeuvrées par une barre
horizontale, pour portes situées sur les voies d'evacuation - Prescriptions et méthodes
d'essais
Ta slovenski standard je istoveten z: prEN 1125
ICS:
91.190 Stavbna oprema Building accessories
oSIST prEN 1125:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1125:2015

---------------------- Page: 2 ----------------------
oSIST prEN 1125:2015

EUROPEAN STANDARD
DRAFT
prEN 1125
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2014
ICS 91.190 Will supersede EN 1125:2008
English Version
Building hardware - Panic exit devices operated by a horizontal
bar, for use on escape routes - Requirements and test methods
Quincaillerie pour le bâtiment - Fermetures anti-panique Schlösser und Baubeschläge - Paniktürverschlüsse mit
manoeuvrées par une barre horizontale, pour portes situées horizontaler Betätigungsstange für Türen in Rettungswegen
sur les voies d'evacuation - Prescriptions et méthodes - Anforderungen und Prüfverfahren
d'essais
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1125:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1125:2015
prEN 1125:2014 (E)
Contents Page
Foreword .4
Introduction .5
1 Scope .8
2 Normative references .8
3 Terms and definitions .8
4 Product characteristics . 12
4.1 General . 12
4.2 Ability to release . 13
4.3 Suitability for use on fire doors . 20
4.4 Self-closing .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.