SIST EN 17610:2022
(Main)Building hardware - Environmental product declarations - Product category rules complementary to EN 15804 for building hardware
Building hardware - Environmental product declarations - Product category rules complementary to EN 15804 for building hardware
This document provides product category rules (PCR) for Type III environmental declarations for:
Building hardware products for opening and closing doors, gates, windows and shutters:
- Door and window handles (EN 1906)
- Hinges (EN 1935)
- Window fittings (EN 13126)
- Shutter hardware devices (e.g. EN 14648)
- Door closers (incl. door coordinators) and hold open devices (EN 1154 + A1, EN 1155, EN 1158 + A1)
- Sliding door gear (EN 1527, EN 15706)
- Glass door gear
Building hardware products for locking and unlocking doors, gates, windows and shutters:
- Locks (EN 12209, EN 15685)
- Locking cylinders (EN 1303)
- Padlocks (EN 12320)
- Push button locks (BS 8607)
- Exit devices (EN 179, EN 1125)
Electromechanical building hardware products:
- Mechatronic cylinders (EN 15684)
- Mechatronic padlocks (EN 16864)
- Mechatronic door furniture (EN 16867)
- Electromechanically operated locks and striking plates (EN 14846)
- Electrically controlled exit systems for use on escape routes (EN 13637)
This document complements the core rules for the product category of construction products as defined in the European standard EN 15804:2012+A1:2013+A2:2019. The document is to be used in conjunction with EN 15804:2012+A1:2013+A2:2019.
NOTE The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
- defines the parameters to be declared and the way in which they are collated and reported;
- describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
- defines rules for the development of scenarios;
- includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied;
- includes the rules for reporting the predetermined, environmental and health information that is not covered by Life Cycle Assessment (LCA) for the product, construction process(es) and construction service(s), as relevant;
- defines the conditions under which construction products can be compared based on the information provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.
Schlösser und Baubeschläge - Umweltproduktdeklarationen - Produktkategorieregeln in Ergänzung zu EN 15804 für Schlösser und Baubeschläge
Dieses Dokument liefert Produktkategorieregeln (PCR, en: product category rules) für Typ III Umwelt-deklarationen für:
Schlösser und Baubeschläge zum Öffnen und Schließen von Türen, Toren, Fenstern und Abschlüssen:
- Türdrücker und Fenstergriffe (EN 1906)
- Tür und Fensterbänder (EN 1935)
- Fensterbeschläge (EN 13126)
- Beschläge für Fensterläden (z. B. EN 14648)
- Türschließer (einschl. Schließfolgereglern) und Feststellvorrichtungen (EN 1154, EN 1155, EN 1158)
- Laufwerke für Schiebetüren (EN 1527, EN 15706)
- Laufwerke für Glastüren
Schlösser und Baubeschläge zum Verriegeln und Entriegeln von Türen, Toren, Fenstern und Abschlüssen:
- Schlösser (EN 12209, EN 15685)
- Schließzylinder (EN 1303)
- Hangschlösser (EN 12320)
- Schlösser für Drucktaster (BS 8607)
- Fluchttürverschlüsse (EN 179, EN 1125)
Elektromechanische Baubeschlagprodukte:
- mechatronische Schließzylinder (EN 15684)
- mechatronische Hangschlösser (EN 16864)
- mechatronische Türbeschläge (EN 16867)
- elektromechanische Schlösser und Schließbleche (EN 14846)
- elektrisch gesteuerte Fluchttüranlagen für Türen in Fluchtwegen (EN 13637)
Dieses Dokument ergänzt die Grundregeln für die Produktkategorie Bauprodukte, wie in der Europäischen Norm EN 15804:2012+A2:2019 definiert. Das Dokument ist in Verbindung mit EN 15804:2012+A2:2019 zu verwenden.
ANMERKUNG Die Beurteilung der sozialen und wirtschaftlichen Qualität auf der Produktebene ist nicht Gegenstand dieses Dokuments.
Die grundlegenden Produktkategorieregeln (PCR):
- definieren die zu deklarierenden Parameter und die Art, wie sie auf Vollständigkeit überprüft und kommuniziert werden;
- beschreiben, welche Phasen des Lebenszyklus eines Produkts in der EPD berücksichtigt werden und welche Prozesse in die Lebenszyklusphasen einzubeziehen sind;
- definieren die Regeln für die Entwicklung von Szenarien;
- beinhalten die Regeln zur Berechnung der Sachbilanz und der Wirkungsabschätzung, die einer EPD zugrunde liegen, einschließlich der Festlegung der zu verwendenden Datenqualität;
- beinhalten die Regeln für die Kommunikation der vordefinierten Umwelt und Gesundheitsinformationen, die für das Bauprodukt, den/die Bauprozess(e) und die Bauleistung(en) nicht von einer Ökobilanz (LCA) abgedeckt sind, soweit maßgeblich;
- definieren die Bedingungen, unter welchen Bauprodukte auf der Basis der Informationen aus den EPD verglichen werden können.
Für die EPD von Bauleistungen gelten dieselben Regeln und Anforderungen wie für die EPD von Bauprodukten.
Quincaillerie pour le bâtiment - Déclarations Environnementales de Produit - Règles de catégorie de produit complémentaires à l’EN 15804 pour la quincaillerie du bâtiment
Le présent document fournit des règles de catégories de produits (RCP) pour les déclarations environnementales de Type III relatives aux :
Produits de quincaillerie du bâtiment pour ouverture et fermeture de portes, grilles, fenêtres et volets :
- Poignées pour portes et fenêtres(EN 1906)
- Charnières (EN 1935)
- Ferrures pour fenêtres (EN 13126)
- Ferrures pour volets (par exemple, EN 14648)
- Ferme-portes (y compris dispositifs de sélection de vantaux) et dispositifs de retenue pour portes battantes (EN 1154, EN 1155, EN 1158)
- Système de porte coulissante (EN 1527, EN 15706)
- Équipement pour porte vitrée
Produits de quincaillerie du bâtiment pour verrouillage et déverrouillage de portes, grilles, fenêtres et volets :
- Serrures (EN 12209, EN 15685)
- Cylindres de verrouillage (EN 1303)
- Cadenas (EN 12320)
- Verrous à bouton-poussoir (BS 8607)
- Dispositifs de fermeture d’urgence (EN 179, EN 1125)
Produits de quincaillerie du bâtiment électromécaniques :
- Cylindres mécatroniques (EN 15684)
- Cadenas mécatroniques (EN 16864)
- Poignée de porte mécatronique (EN 16867)
- Serrures et gâches manoeuvrées par des moyens électromécaniques (EN 14846)
- Systèmes de fermeture de secours contrôlés électriquement destinés à être installés sur des voies d'évacuation (EN 13637)
Le présent document complète les règles de base régissant la catégorie de produits de construction tels que définis dans la norme européenne EN 15804:2012A2:2019. Le document doit être utilisé conjointement avec l’EN 15804:2012+A2:2019.
NOTE L’évaluation des performances sociales et économiques au niveau d’un produit n’est pas couverte par le présent document.
Ces règles :
- définissent les paramètres à déclarer, et la manière dont ils sont regroupés et consignés ;
- décrivent les étapes du cycle de vie d'un produit prises en compte dans la DEP ainsi que les processus devant être inclus dans les étapes du cycle de vie ;
- définissent les règles relatives à l'élaboration de scénarios ;
- intègrent les règles de calcul de l'inventaire du cycle de vie et de l'évaluation de l'impact du cycle de vie servant de base à la DEP, y compris la spécification de la qualité des données à appliquer ;
- intègrent les règles de communication des informations environnementales et sanitaires prédéterminées, qui ne sont pas couvertes par l'analyse du cycle de vie (ACV) pour le produit, un (des) processus de construction et un (des) services de construction, si nécessaire ;
- définissent les conditions dans lesquelles les produits de construction peuvent être comparés, sur la base des informations fournies par la DEP.
Les règles et les exigences applicables à la DEP des services de construction sont les mêmes que pour la DEP des produits de construction.
Stavbno okovje - Okoljske deklaracije za proizvode - Pravila za kategorije proizvodov, ki dopolnjujejo EN 15804 za stavbno okovje
Ta dokument vsebuje pravila za kategorije proizvodov (PCR) za okoljske deklaracije tipa III za:
proizvode stavbnega okovja za odpiranje in zapiranje vrat, pregrad, oken in polken:
– kljuke za okna in vrata (EN 1906)
– tečaji (EN 1935)
– okensko okovje (EN 13126)
– okovje za polkna (npr. EN 14648)
– zapirala za vrata (vkl. naprave za usklajeno zapiranje vrat) in naprave za nadzor zapiranja vrat (EN 1154 + A1, EN 1155, EN 1158 + A1)
– okovje za drsna vrata (EN 1527, EN 15706)
– okovje za steklena vrata
proizvode stavbnega okovja za zaklepanje in odklepanje vrat, pregrad, oken in polken:
– ključavnice (EN 12209, EN 15685)
– zaklepni cilindri (EN 1303)
– obešanke (EN 12320)
– potisne ključavnice (BS 8607)
– izhodne naprave (EN 179, EN 1125)
elektromehanske proizvode stavbnega okovja:
– mehatronski cilindri (EN 15684)
– mehatronske obešanke (EN 16864)
– mehatronsko okovje za vrata (EN 16867)
– elektromehanske ključavnice in zaporne plošče (EN 14846)
– električno krmiljen sistem izhoda za uporabo na evakuacijskih poteh (EN 13637)
Ta dokument dopolnjuje osnovna pravila za opredelitev kategorije gradbenih proizvodov v skladu z določili evropskega standarda EN 15804:2012+A1:2013+A2:2019. Uporabljati ga je treba v povezavi s standardom EN 15804:2012+A1:2013+A2:2019.
OPOMBA: Ocena družbenih in gospodarskih učinkovitosti na ravni proizvodov ni zajeta v tem dokumentu.
Osnovna pravila za kategorije proizvodov:
– določajo parametre, ki jih je treba deklarirati, ter način njihovega zbiranja in sporočanja;
– opisujejo, katere stopnje življenjskega cikla proizvoda so obravnavane v okoljskih deklaracijah na proizvodih in kateri procesi bodo vključeni v stopnje življenjskega cikla;
– določajo pravila za pripravo scenarijev;
– vključujejo pravila za izračun popisa življenjskega cikla in ocenjevanje vpliva življenjskega cikla, na katerih temeljijo okoljske deklaracije za proizvode, vključno s specifikacijo kakovosti podatkov, ki jo je treba uporabiti;
– vključujejo pravila za sporočanje vnaprej določenih, okoljskih in zdravstvenih informacij, ki niso obravnavane v oceni življenjskega cikla za proizvod (LCA), gradbene procese in gradbene storitve, kadar je to potrebno;
– določajo pogoje, pod katerimi je mogoče gradbene proizvode primerjati na podlagi informacij iz okoljskih deklaracij za proizvode.
Za okoljsko deklaracijo za proizvode za gradbene storitve se uporabljajo enaka pravila in zahteve kot za okoljsko deklaracijo za proizvode za gradbene proizvode.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17610:2022
01-oktober-2022
Stavbno okovje - Okoljske deklaracije za proizvode - Pravila za kategorije
proizvodov, ki dopolnjujejo EN 15804 za stavbno okovje
Building hardware - Environmental product declarations - Product category rules
complementary to EN 15804 for building hardware
Schlösser und Baubeschläge - Umweltproduktdeklarationen - Produktkategorieregeln in
Ergänzung zu EN 15804 für Schlösser und Baubeschläge
Quincaillerie pour le bâtiment - Déclarations Environnementales de Produit - Règles de
catégorie de produit complémentaires à l’EN 15804 pour la quincaillerie du bâtiment
Ta slovenski standard je istoveten z: EN 17610:2022
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
91.190 Stavbna oprema Building accessories
SIST EN 17610:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17610:2022
---------------------- Page: 2 ----------------------
SIST EN 17610:2022
EN 17610
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2022
EUROPÄISCHE NORM
ICS 91.190
English Version
Building hardware - Environmental product declarations -
Product category rules complementary to EN 15804 for
building hardware
Quincaillerie pour le bâtiment - Déclarations Schlösser und Baubeschläge -
Environnementales de Produit - Règles de catégorie de Umweltproduktdeklarationen -
produit complémentaires à l'EN 15804 pour la Produktkategorieregeln in Ergänzung zu EN 15804 für
quincaillerie du bâtiment Schlösser und Baubeschläge
This European Standard was approved by CEN on 13 June 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17610:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17610:2022
EN 17610:2022 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 6
3 Terms and definitions . 7
4 Abbreviations . 7
5 General aspects . 8
5.1 Objective of the Core PCR . 8
5.2 Types of EPD with respect to life cycle stages covered . 8
5.3 Comparability of EPD for construction products . 8
5.4 Additional environmental information . 8
5.4.1 General . 8
5.4.2 Additional impact indicators . 9
5.4.3 Additional information on carbon offset, carbon storage and delayed emissions . 9
5.4.4 Additional Information not derived from LCA . 9
5.5 Ownership, responsibility and liability for the EPD . 9
5.6 Communication formats . 9
6 Product Category Rules for LCA . 9
6.1 Product category . 9
6.2 Life cycle stages and their information modules to be included . 9
6.2.1 General . 9
6.2.2 A1-A3, Product stage, information modules . 9
6.2.3 A4-A5, Construction process stage, information modules . 9
6.2.4 B1-B5, Use stage, information modules related to the building fabric . 9
6.2.5 B6-B7, use stage, information modules related to the operation of the building . 9
6.2.6 C1-C4 End-of-life stage, information modules .10
6.2.7 D, Benefits and loads beyond the system boundary, information module .10
6.3 Calculation rules for the LCA .10
6.3.1 Functional or declared unit .10
6.3.2 Functional unit .10
6.3.3 Declared unit .12
6.3.4 Reference service life (RSL).12
6.3.5 System boundaries .14
6.3.6 Criteria for the exclusion of inputs and outputs .16
6.3.7 Selection of data .16
6.3.8 Data quality .16
6.3.9 Developing product level scenarios .16
6.3.10 Units .16
6.4 Inventory analysis .16
6.4.1 Collecting data .16
6.4.2 Calculation procedures .16
6.4.3 Allocation of input flows and output emissions .16
6.4.4 Information on biogenic carbon content .17
6.5 Impact assessment .17
2
---------------------- Page: 4 ----------------------
SIST EN 17610:2022
EN 17610:2022 (E)
6.5.1 General . 17
6.5.2 Core environmental impact indicators . 17
6.5.3 Additional environmental impact indicators . 18
7 Content of the EPD . 18
7.1 Declaration of general information . 18
7.2 Declaration of environmental indicators derived from LCA . 18
7.2.1 General . 18
7.2.2 Rules for declaring LCA information per module . 18
7.2.3 Indicators describing environmental impacts based on Life Cycle Impact Assessment
(LCIA) . 18
7.2.4 Indicators describing resource use and environmental information based on Life
Cycle Inventory (LCI) . 18
7.2.5 Information on biogenic carbon content . 19
7.3 Scenarios and additional technical information . 19
7.3.1 General . 19
7.3.2 Construction process stage . 19
7.3.3 B1-B7 use stage . 19
7.3.4 End-of-life . 20
7.4 Additional information on release of dangerous substances to indoor air, soil and
water during the use stage . 20
7.4.1 Indoor air . 20
7.4.2 Soil and water . 20
7.5 Aggregation of information modules . 20
8 Project report . 20
8.1 General . 20
8.2 LCA-related elements of the project report . 20
8.3 Documentation on additional information . 20
8.4 Data availability for verification . 20
9 Verification and validity of an EPD. 20
Annex A (normative) Requirements and guidance on the reference service life . 21
Annex B (informative) Waste . 22
Annex C (normative) Characterization factors for GWP, ODP, AP, EP, POCP and ADP . 23
Annex D (informative) End of life formulae . 24
Annex E (informative) Schemes to be applied for data quality assessment of generic and
specific data . 25
Bibliography . 26
3
---------------------- Page: 5 ----------------------
SIST EN 17610:2022
EN 17610:2022 (E)
European foreword
This document (EN 17610:2022) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2023, and conflicting national standards shall
be withdrawn at the latest by February 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
The document is to be used in conjunction with EN 15804:2012+A2:2019.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
4
---------------------- Page: 6 ----------------------
SIST EN 17610:2022
EN 17610:2022 (E)
1 Scope
This document provides product category rules (PCR) for Type III environmental declarations for:
— Building hardware products for opening and closing doors, gates, windows and shutters:
— Lever handles and knob furniture (EN 1906);
— Single-axis hinges (EN 1935);
— Hardware for windows and door height windows (EN 13126 (all parts));
— Fittings for shutters (e.g. EN 14648);
— Controlled door closing devices, electrically powered hold-open devices for swing doors and
door coordinator devices (EN 1154, EN 1155, EN 1158);
— Hardware for sliding doors, folding doors and roll fronts (EN 1527, EN 15706);
— Glass door gear;
— Building hardware products for locking and unlocking doors, gates, windows and shutters:
— Mechanically operated locks and locking plates, multipoint locks, latches and locking plates
1
(EN 12209, EN 15685 );
— Cylinders for locks (EN 1303);
— Padlocks and padlock fittings (EN 12320);
— Mechanically operated push-button locksets (BS 8607);
— Emergency exit devices operated by a lever handle or push pad, for use on escape routes and
panic exit devices operated by a horizontal bar, for use on escape routes (EN 179, EN 1125);
— Electromechanical building hardware products:
— Mechatronic cylinders (EN 15684);
— Mechatronic padlocks (EN 16864);
— Mechatronic door furniture (EN 16867);
— Electromechanically operated locks and striking plates (EN 14846);
— Electrically controlled exit systems for use on escape routes (EN 13637).
This document complements the core rules for the product category of construction products as defined
in the European standard EN 15804:2012+A2:2019.
NOTE The assessment of social and economic performances at product level is not covered by this document.
1
Under preparation. Stage at the time of publication: prEN 15685:2022
5
---------------------- Page: 7 ----------------------
SIST EN 17610:2022
EN 17610:2022 (E)
The core PCR:
— defines the parameters to be declared and the way in which they are collated and reported;
— describes which stages of a product’s life cycle are considered in the EPD and which processes are to
be included in the life cycle stages;
— defines rules for the development of scenarios;
— includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment
underlying the EPD, including the specification of the data quality to be applied;
— includes the rules for reporting the predetermined, environmental and health information that is not
covered by Life Cycle Assessment (LCA) for the product, construction process(es) and construction
service(s), as relevant;
— defines the conditions under which construction products can be compared based on the information
provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of
construction products.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 15804:2012+A2:2019, Sustainability of construction works - Environmental product declarations - Core
rules for the product category of construction products
EN 1125, Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes -
Requirements and test methods
EN 1154, Building hardware - Controlled door closing devices - Requirements and test methods
EN 1155, Building hardware - Electrically powered hold-open devices for swing doors - Requirements and
test methods
EN 1158, Building hardware - Door coordinator devices - Requirements and test methods
EN 12209, Building hardware - Mechanically operated locks and locking plates - Requirements and test
methods
EN 12320, Building hardware - Padlocks and padlock fittings - Requirements and test methods
EN 1303, Building hardware - Cylinders for locks - Requirements and test methods
EN 13126 (all parts), Building hardware - Hardware for windows and door height windows - Requirements
and test methods
EN 14846, Building hardware - Locks and latches - Electromechanically operated locks and striking plates -
Requirements and test methods
6
---------------------- Page: 8 ----------------------
SIST EN 17610:2022
EN 17610:2022 (E)
EN 1527, Building hardware - Hardware for sliding doors and folding doors - Requirements and test
methods
EN 15706, Hardware for furniture - Strength and durability of slide fittings for sliding doors and roll fronts
EN 179, Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on
escape routes - Requirements and test methods
EN 1906, Building hardware - Lever handles and knob furniture - Requirements and test methods
EN 1935, Building hardware - Single-axis hinges - Requirements and test methods
EN 15684, Building hardware - Mechatronic cylinders - Requirements and test methods
EN 16864, Building hardware - Mechatronic padlocks - Requirements and test methods
EN 16867, Building hardware - Mechatronic door furniture - Requirements and test methods
EN 13637, Building hardware - Electrically controlled exit systems for use on escape routes - Requirements
and test methods
EN 14648, Building hardware - Fittings for shutters - Requirements and test methods
BS 8607, Mechanically operated push button locksets. Requirements and test methods
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 15804:2012+A2:2019 and the
following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
building hardware
products mounted as part of doors, windows, gates, shutters providing operation, function and
performance of these products
4 Abbreviations
For the purposes of this document, the following abbreviations apply.
ADPe Abiotic depletion potential (elements)
ADPf Abiotic depletion potential (fossil fuels)
AP Acidification potential of soil and water
c-PCR Complementary product category rules
EoL End of Life
EP Eutrophication potential
7
---------------------- Page: 9 ----------------------
SIST EN 17610:2022
EN 17610:2022 (E)
EPD Environmental product declaration
GWP Global warming potential
ODP Depletion potential of the stratospheric ozone layer
POCP Formation potential of tropospheric ozone
RSL Reference service life
5 General aspects
5.1 Objective of the Core PCR
An EPD according to this document provides quantified environmental information for building
hardware using a uniform and scientific basis. It also provides information on health-related emissions
to indoor air, soil and water during the use stage of the building. The purpose of an EPD in the
construction sector is to provide the basis for assessing building and other construction works, and
identifying those which cause less stress to the environment.
Thus, the objective of this complementary PCR is to ensure:
— the provision of verifiable and consistent data for an EPD for building hardware, based on LCA;
— the provision of verifiable and consistent product related technical data or scenarios for the
assessment of the environmental performance of buildings;
— the provision of verifiable and consistent product related technical data or scenarios potentially
related to the health of users for the assessment of the performance of buildings;
— that comparisons between building hardware are carried out in the context of their application in
the building;
— the consistent communication of the environmental information of building hardware.
Declarations based on this document are not comparative assertions.
NOTE See definition 3.4 in EN 15804:2012+A2:2019 and EN ISO 14044:2006, 5.3 for more information
concerning LCA used for comparative assertion.
5.2 Types of EPD with respect to life cycle stages covered
As EN 15804:2012+A2:2019.
5.3 Comparability of EPD for construction products
As EN 15804:2012+A2:2019, in addition:
When comparing hardware products with different reference service lives, the reference study period for
this comparison shall be the same.
5.4 Additional environmental information
5.4.1 General
As EN 15804:2012+A2:2019.
8
---------------------- Page: 10 ----------------------
SIST EN 17610:2022
EN 17610:2022 (E)
5.4.2 Additional impact indicators
As EN 15804:2012+A2:2019.
5.4.3 Additional information on carbon offset, carbon storage and delayed emissions
As EN 15804:2012+A2:2019.
5.4.4 Additional Information not derived from LCA
As EN 15804:2012+A2:2019.
5.5 Ownership, responsibility and liability for the EPD
As EN 15804:2012+A2:2019, in addition:
It shall be stated, which kind of EPD is created, e.g. an industry representative EPD (by an association) for
a product group, a representative company specific EPD for a product group or a specific EPD for one
product of a company.
When intending to use average or industry representative EPDs, ownership, responsibility and liability
shall be clearly defined. A manufacturer intending to use average or industry representative EPDs for its
products, he/she shall be authorized to do so by the organization (program operator) owning the original
EPD.
5.6 Communication formats
As EN 15804:2012+A2:2019.
6 Product Category Rules for LCA
6.1 Product category
The product category referred to in this document includes building hardware listed in the scope of this
document.
6.2 Life cycle stages and their information modules to be included
6.2.1 General
As EN 15804:2012+A2:2019.
6.2.2 A1-A3, Product stage, information modules
As EN 15804:2012+A2:2019.
6.2.3 A4-A5, Construction process stage, information modules
As EN 15804:2012+A2:2019.
6.2.4 B1-B5, Use stage, information modules related to the building fabric
As EN 15804:2012+A2:2019.
6.2.5 B6-B7, Use stage, information modules related to the operation of the building
As EN 15804:2012+A2:2019.
9
---------------------- Page: 11 ----------------------
SIST EN 17610:2022
EN 17610:2022 (E)
6.2.6 C1-C4 End-of-life stage, information modules
As EN 15804:2012+A2:2019.
6.2.7 D, Benefits and loads beyond the system boundary, information module
As EN 15804:2012+A2:2019.
6.3 Calculation rules for the LCA
6.3.1 Functional or declared unit
As EN 15804:2012+A2:2019.
6.3.2 Functional unit
6.3.2.1 General
As EN 15804:2012+A2:2019, in addition:
A functional unit for building hardware products for opening and closing doors, gates, windows and
shutters can be defined as:
— Lever handles and knob furniture: “ensure the function of opening and maintaining doors and
windows in buildings in a closed position by using a door or window handle with a net mass of
[weight] kg over the reference service life of [RSL] years, which corresponds to a minimum of [tested
number of use cycles] use cycles.”
— Single-axis hinges: “enable doors and windows in buildings to pivot about a fixed axis (including with
those with a spring action) by using a hinge with a net mass of [weight] kg over the reference service
life of [RSL] years, which corresponds to a minimum of [tested number of use cycles] use cycles.”
— Hardware for windows and door height windows: “allow the opening and closing of windows in
buildings having a range of actions (e.g., pivoting, sliding, tilt-and-turn, etc.) by using of window
fittings with a net mass of [weight] kg over the reference service life of [RSL] years, which
corresponds to a minimum of [tested number of use cycles] use cycles.”
— Fittings for shutters: “ensure the correct operation of shutters by using shutter hardware (including
hinges, fasteners, etc.) with a net mass of [weight] kg over the reference service life of [RSL] years,
which corresponds to a minimum of [tested number of use cycles] use cycles.”
— Controlled door closing devices, electrically powered hold-open devices for swing doors and door
coordinator devices: “ensure the control of the closing action of a door by using a door
closer/coordinator device with a net mass of [weight] kg over the reference service life of [RSL]
years, which corresponds to a minimum of [tested number of use cycles] use cycles.”
— Hardware for sliding doors, folding doors and roll fronts: “ensure the fastening of the door, window
or shutter, and to open and close it safely, by using sliding systems with a net mass of [weight] kg
over the reference service life of [RSL] years, which corresponds to a minimum of [tested number of
use cycles] use cycles.”
— Glass door gear: “allow for the fastening as well as the opening and closing of glass doors by using
glass door gear with a net mass of [weight] kg over the reference service life of [RSL] years, which
corresponds to a minimum of [tested number of use cycles] use cycles. These products have been
developed to be integrated into glass doors for interior or exterior use, in accordance with the
manufacturer’s instructions.”
10
---------------------- Page: 12 ----------------------
SIST EN 17610:2022
EN 17610:2022 (E)
A functional unit for building hardware products for locking and unlocking doors, gates, windows and
shutters can be defined as:
— Mechanically operated locks and locking plates, multipoint locks, latches and locking plates: “ensure
the function of ensuring the fastening of a door, a window or a shutter locked in the closed position
by using a lock of a net weight of [weight] kg during the reference service life of [RSL] years, which
corresponds to a cycle of [tested number of use cycles] uses.”
— Cylinders for locks: “ensu
...
SLOVENSKI STANDARD
oSIST prEN 17610:2020
01-december-2020
Stavbno okovje - Okoljske deklaracije za proizvode - Pravila za kategorije
proizvodov, ki dopolnjujejo EN 15804 za stavbno okovje
Building hardware - Environmental product declarations - Product category rules
complementary to EN 15804 for building hardware
Schlösser und Baubeschläge - Umweltproduktdeklarationen - Produktkategorieregeln in
Ergänzung zu EN 15804 für Schlösser und Baubeschläge
Quincaillerie pour le bâtiment - Déclarations Environnementales de Produit - Règles de
catégorie de produit complémentaires à l’EN 15804 pour la quincaillerie du bâtiment
Ta slovenski standard je istoveten z: prEN 17610
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
91.190 Stavbna oprema Building accessories
oSIST prEN 17610:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17610:2020
---------------------- Page: 2 ----------------------
oSIST prEN 17610:2020
DRAFT
EUROPEAN STANDARD
prEN 17610
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2020
ICS 91.190
English Version
Building hardware - Environmental product declarations -
Product category rules complementary to EN 15804 for
building hardware
Quincaillerie pour le bâtiment - Déclarations Schlösser und Baubeschläge -
Environnementales de Produit - Règles de catégorie de Umweltproduktdeklarationen -
produit complémentaires à l'EN 15804 pour la Produktkategorieregeln in Ergänzung zu EN 15804 für
quincaillerie du bâtiment Schlösser und Baubeschläge
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 33.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17610:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17610:2020
FprEN 17610:2020 (E)
Contents Page
European foreword . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 9
4 Abbreviations . 14
5 General aspects . 15
5.1 Objective of the Core PCR . 15
5.2 Types of EPD with respect to life cycle stages covered . 15
5.3 Comparability of EPD for construction products . 18
5.4 Additional environmental information . 18
5.4.1 General . 18
5.4.2 Additional impact indicators . 19
5.4.3 Additional information on carbon offset, carbon storage and delayed emissions . 19
5.4.4 Additional Information not derived from LCA . 19
5.5 Ownership, responsibility and liability for the EPD . 19
5.6 Communication formats . 19
6 Product Category Rules for LCA . 20
6.1 Product category . 20
6.2 Life cycle stages and their information modules to be included . 20
6.2.1 General . 20
6.2.2 A1-A3, Product stage, information modules . 20
6.2.3 A4-A5, Construction process stage, information modules . 20
6.2.4 B1-B5, Use stage, information modules related to the building fabric . 20
6.2.5 B6-B7, use stage, information modules related to the operation of the building . 21
6.2.6 C1-C4 End-of-life stage, information modules . 21
6.2.7 D, Benefits and loads beyond the system boundary, information module . 21
6.3 Calculation rules for the LCA . 21
6.3.1 Functional or declared unit . 21
6.3.2 Functional unit . 22
6.3.3 Declared unit . 24
6.3.4 Reference service life (RSL). 24
6.3.5 System boundaries . 27
6.3.6 Criteria for the exclusion of inputs and outputs . 35
6.3.7 Selection of data . 36
6.3.8 Data quality . 36
6.3.9 Developing product level scenarios . 38
6.3.10 Units . 38
6.4 Inventory analysis . 39
6.4.1 Collecting data . 39
6.4.2 Calculation procedures . 39
6.4.3 Allocation of input flows and output emissions . 39
6.4.4 Information on biogenic carbon content . 42
6.5 Impact assessment . 42
2
---------------------- Page: 4 ----------------------
oSIST prEN 17610:2020
FprEN 17610:2020 (E)
6.5.1 General . 42
6.5.2 Core environmental impact indicators . 42
6.5.3 Additional environmental impact indicators . 42
7 Content of the EPD . 43
7.1 Declaration of general information . 43
7.2 Declaration of environmental indicators derived from LCA . 44
7.2.1 General . 44
7.2.2 Rules for declaring LCA information per module . 44
7.2.3 Indicators describing environmental impacts based on Life Cycle Impact Assessment
(LCIA) . 45
7.2.4 Indicators describing resource use and environmental information based on Life
Cycle Inventory (LCI) . 48
7.2.5 Information on biogenic carbon content . 50
7.3 Scenarios and additional technical information . 51
7.3.1 General . 51
7.3.2 Construction process stage . 51
7.3.3 B1-B7 use stage . 52
7.3.4 End-of-life . 56
7.4 Additional information on release of dangerous substances to indoor air, soil and
water during the use stage . 56
7.4.1 Indoor air . 56
7.4.2 Soil and water . 56
7.5 Aggregation of information modules . 57
8 Project report . 57
8.1 General . 57
8.2 LCA-related elements of the project report . 57
8.3 Documentation on additional information . 59
8.4 Data availability for verification . 59
9 Verification and validity of an EPD . 60
Annex A (normative) Requirements and guidance on the reference service life . 61
Annex B (informative) Waste . 64
B.1 End-of-waste . 64
B.2 Properties of hazardous waste for Table 9 . 64
Annex C (normative) Characterization factors for GWP, ODP, AP, EP, POCP and ADP . 65
C.1 Core environmental impact categories and indicators . 65
C.2 Calculation rules for the climate change impact category . 66
C.2.1 General . 66
C.2.2 Total global warming potential (GWP-total) . 66
C.2.3 Fossil global warming potential (GWP-fossil) . 66
C.2.4 Biogenic global warming potential (GWP-biogenic) . 66
C.2.5 Land use and land use change global warming potential (GWP-luluc) . 67
C.3 Additional impact categories and indicators . 68
C.4 Characterization factors . 68
Annex D (informative) End of life formulae . 69
3
---------------------- Page: 5 ----------------------
oSIST prEN 17610:2020
FprEN 17610:2020 (E)
D.1 Introduction . 69
D.2 Terms and definitions . 69
D.2.1 Value correction factor . 69
D.2.2 Quantities . 69
D.2.3 Specific emissions and resources per unit of analysis . 70
D.2.4 Specific emissions and resources per unit of analysis . 71
D.2.5 Efficiency . 72
D.2.6 Lower heating value . 72
D.3 Formulae . 72
D.3.1 General . 72
D.3.2 Modules A1–A3 . 72
D.3.3 Module C . 73
D.3.4 Module D. 73
Annex E (informative) Schemes to be applied for data quality assessment of generic and
specific data . 74
Bibliography . 76
4
---------------------- Page: 6 ----------------------
oSIST prEN 17610:2020
FprEN 17610:2020 (E)
European foreword
This document (FprEN 17610:2020) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
5
---------------------- Page: 7 ----------------------
oSIST prEN 17610:2020
FprEN 17610:2020 (E)
1 Scope
This document provides product category rules (PCR) for Type III environmental declarations for:
Building hardware products for opening and closing doors, gates, windows and shutters:
— Door and window handles (EN 1906)
— Hinges (EN 1935)
— Window fittings (EN 13126)
— Shutter hardware devices (e.g. EN 14648)
— Door closers (incl. door coordinators) and hold open devices (EN 1154, EN 1155, EN 1158)
— Sliding door gear (EN 1527, EN 15706)
— Glass door gear
Building hardware products for locking and unlocking doors, gates, windows and shutters:
— Locks (EN 12209, EN 15685)
— Locking cylinders (EN 1303)
— Padlocks (EN 12320)
— Push button locks (BS 8607)
— Exit devices (EN 179, EN 1125)
Electromechanical building hardware products:
— Mechatronic cylinders (EN 15684)
— Mechatronic padlocks (EN 16864)
— Mechatronic door furniture (EN 16867)
— Electromechanically operated locks and striking plates (EN 14846)
— Electrically controlled exit systems for use on escape routes (EN 13637)
This document complements the core rules for the product category of construction products as defined
in the European standard EN 15804:2012A2:2019. The document is to be used in conjunction with
EN 15804:2012+A2:2019.
NOTE The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
— defines the parameters to be declared and the way in which they are collated and reported;
— describes which stages of a product’s life cycle are considered in the EPD and which processes are to
be included in the life cycle stages;
— defines rules for the development of scenarios;
6
---------------------- Page: 8 ----------------------
oSIST prEN 17610:2020
FprEN 17610:2020 (E)
— includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment
underlying the EPD, including the specification of the data quality to be applied;
— includes the rules for reporting the predetermined, environmental and health information that is not
covered by Life Cycle Assessment (LCA) for the product, construction process(es) and construction
service(s), as relevant;
— defines the conditions under which construction products can be compared based on the information
provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of
construction products.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 15804:2012+A2:2019, Sustainability of construction works — Environmental product declarations —
Core rules for the product category of construction products
CEN/TR 15941, Sustainability of construction works — Environmental product declarations —
Methodology for selection and use of generic data
EN 15942, Sustainability of construction works — Environmental product declarations — Communication
format business-to-business
EN ISO 14025, Environmental labels and declarations — Type III environmental declarations — Principles
and procedures (ISO 14025:2006)
EN ISO 14044, Environmental management — Life cycle assessment — Requirements and guidelines
(ISO 14044:2006)
ISO 15686-1, Buildings and constructed assets — Service life planning — Part 1: General principles and
framework
ISO 15686-2, Buildings and constructed assets — Service life planning — Part 2: Service life prediction
procedures
ISO 15686-7, Buildings and constructed assets — Service life planning — Part 7: Performance evaluation
for feedback of service life data from practice
ISO 15686-8, Buildings and constructed assets — Service-life planning — Part 8: Reference service life and
service-life estimation
International Reference Life Cycle Data System (ILCD) Handbook Nomenclature and other provisions
PEFCR Guidance document — Guidance for the development of Product Environmental Footprint Category
Rules (PEFCRs)
ISO 21930:2017, Sustainability in buildings and civil engineering works — Core rules for environmental
product declarations of construction products and services
7
---------------------- Page: 9 ----------------------
oSIST prEN 17610:2020
FprEN 17610:2020 (E)
EN 1125, Building hardware — Panic exit devices operated by a horizontal bar, for use on escape routes —
Requirements and test methods
EN 1154, Building hardware — Controlled door closing devices — Requirements and test methods
EN 1158, Building hardware — Door coordinator devices — Requirements and test methods
EN 12209, Building hardware — Mechanically operated locks and locking plates — Requirements and test
methods
EN 12320, Building hardware — Padlocks and padlock fittings — Requirements and test methods
EN 1303, Building hardware — Cylinders for locks — Requirements and test methods
EN 13126, Building hardware — Hardware for windows and door height windows — Requirements and
test methods — Part 1: Requirements common to all types of hardware
EN 14846, Building hardware — Locks and latches — Electromechanically operated locks and striking
plates — Requirements and test methods
EN 1527, Building hardware — Hardware for sliding doors and folding doors — Requirements and test
methods
EN 15685, Building hardware — Requirements and test methods — Multipoint locks, latches and locking
plates — Characteristics and test methods
EN 15706, Hardware for furniture — Strength and durability of slide fittings for sliding doors and roll fronts
EN 179, Building hardware — Emergency exit devices operated by a lever handle or push pad, for use on
escape routes — Requirements and test methods
EN 1906, Building hardware — Lever handles and knob furniture — Requirements and test methods
EN 1935, Building hardware — Single—axis hinges — Requirements and test methods
EN 15684, Building hardware — Mechatronic cylinders — Requirements and test methods
EN 16864, Building hardware — Mechatronic padlocks — Requirements and test methods
EN 16867, Building hardware — Mechatronic door furniture — Requirements and test methods
EN 13637, Building hardware — Electrically controlled exit systems for use on escape routes —
Requirements and test methods
BS 8607, Mechanically operated push button locksets. Requirements and test methods
8
---------------------- Page: 10 ----------------------
oSIST prEN 17610:2020
FprEN 17610:2020 (E)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
additional technical information
information that forms part of the EPD by providing a basis for the development of scenarios
3.2
ancillary material
input material or product that is used by the unit process producing the product, but which does not
constitute part of the product
[SOURCE: EN ISO 14040:2006]
3.3
average data
data representative of a product, product group or construction service, provided by one or more supplier
Note 1 to entry: The product group or construction service can contain similar products or construction services.
3.4
comparative assertion
environmental claim regarding the superiority or equivalence of one product versus a competing product
that performs the same function
[SOURCE: EN ISO 14044:2006]
3.5
construction product
item manufactured or processed for incorporation in construction works
Note 1 to entry: Construction products are items supplied by a single responsible body.
Note 2 to entry: Adapted from the definition in ISO 6707-1:2004 according to the recommendation of
ISO/TC 59/AHG Terminology.
[SOURCE: EN 15643-1:2010]
3.6
construction service
activity that supports the construction process or subsequent maintenance
3.7
co-product
any of two or more marketable materials, products or fuels from the same unit process, but which is not
the object of the assessment
9
---------------------- Page: 11 ----------------------
oSIST prEN 17610:2020
FprEN 17610:2020 (E)
Note 1 to entry: Co-product, by-product and product have the same status and are used for identification of
several distinguished flows of products from the same unit process. From co-product, by-product and product,
waste is the only output to be distinguished as a non-product.
3.8
declared unit
quantity of a construction product for use as a reference unit in an EPD for an environmental declaration
based on one or more information modules
3
EXAMPLE Mass (kg), volume (m ).
Note 1 to entry: Adapted from the definition in ISO 21930:2017.
3.9
construction element
part of a construction containing a defined combination of products
3.10
environmental performance
performance related to environmental impacts and environmental aspects
[SOURCE: ISO 15392:2008]
[SOURCE: ISO 21931-1:2010]
3.11
functional equivalent
quantified functional requirements and/or technical requirements for a building or an assembled system
(part of works) for use as a basis for comparison
Note 1 to entry: Adapted from the definition in ISO 21931-1:2010.
3.12
functional unit
quantified performance of a product system for use as a reference unit
[SOURCE: EN ISO 14040:2006]
3.13
information module
compilation of data to be used as a basis for a Type III environmental declaration covering a unit process
or a combination of unit processes that are part of the life cycle of a product
[SOURCE: EN ISO 14025:2010]
3.14
life cycle assessment
LCA
compilation and evaluation of the inputs, outputs and the potential environmental impacts of a product
system throughout its life cycle
[SOURCE: EN ISO 14044:2006]
10
---------------------- Page: 12 ----------------------
oSIST prEN 17610:2020
FprEN 17610:2020 (E)
3.15
life cycle inventory analysis
LCI
phase of life cycle assessment involving the compilation and quantification of inputs and outputs for a
product throughout its life cycle
[SOURCE: E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.