SIST EN 61784-5-11:2008
Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11
Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11
This part of IEC 61784 specifies the installation profile for CPF 11 (TCnet1). The installation profile is specified in the annex. This annex is read in conjunction with IEC 61918:2007.
Industrielle Kommunikationsnetze - Profile - Teil 5-11: Feldbusinstallation - Installationsprofile für die Kommunikationsprofilfamilie 11
Réseaux de communication industriels - Profils - Partie 5-11: Installation des bus de terrain - Profils d'installation pour CPF 11
Industrijska komunikacijska omrežja - Profili - 5-11. del: Inštalacija procesnih vodil - Inštalacijski profili za CPF 11 (IEC 61784-5-11:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61784-5-11:2008
01-september-2008
Industrijska komunikacijska omrežja - Profili - 5-11. del: Inštalacija procesnih vodil
- Inštalacijski profili za CPF 11 (IEC 61784-5-11:2007)
Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses -
Installation profiles for CPF 11
Industrielle Kommunikationsnetze - Profile - Teil 5-11: Feldbusinstallation -
Installationsprofile für die Kommunikationsprofilfamilie 11
Réseaux de communication industriels - Profils - Partie 5-11: Installation des bus de
terrain - Profils d'installation pour CPF 11
Ta slovenski standard je istoveten z: EN 61784-5-11:2008
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
SIST EN 61784-5-11:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61784-5-11:2008
---------------------- Page: 2 ----------------------
SIST EN 61784-5-11:2008
EUROPEAN STANDARD
EN 61784-5-11
NORME EUROPÉENNE
June 2008
EUROPÄISCHE NORM
ICS 35.100.05; 25.040.40
English version
Industrial communication networks -
Profiles -
Part 5-11: Installation of fieldbuses -
Installation profiles for CPF 11
(IEC 61784-5-11:2007)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 5-11: Installation des bus de terrain - Teil 5-11: Feldbusinstallation -
Profils d'installation pour CPF 11 Installationsprofile
(CEI 61784-5-11:2007) für die Kommunikationsprofilfamilie 11
(IEC 61784-5-11:2007)
This European Standard was approved by CENELEC on 2008-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-5-11:2008 E
---------------------- Page: 3 ----------------------
SIST EN 61784-5-11:2008
EN 61784-5-11:2008 - 2 -
Foreword
The text of document 65C/471/FDIS, future edition 1 of IEC 61784-5-11, prepared by SC 65C,
Industrial networks, of IEC TC 65, Industrial-process measurement, control and automation, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61784-5-11 on
2008-05-01.
This standard is to be used in conjunction with EN 61918:2008.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-05-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61784-5-11:2007 was approved by CENELEC as a
European Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 61784-5-11:2008
- 3 - EN 61784-5-11:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61754-18 2001 Fibre optic connector interfaces - EN 61754-18 2002
Part 18: Type MT-RJ connector family + corr. April 2002
IEC 61918 (mod) 2007 Industrial communication networks - EN 61918 2008
Installation of communication networks in
industrial premises
---------------------- Page: 5 ----------------------
SIST EN 61784-5-11:2008
---------------------- Page: 6 ----------------------
SIST EN 61784-5-11:2008
IEC 61784-5-11
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Profiles –
Part 5-11: Installation of fieldbuses – Installation profiles for CPF 11
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 35.100.05 25.040.40 ISBN 2-8318-9406-9
---------------------- Page: 7 ----------------------
SIST EN 61784-5-11:2008
– 2 – 61784-5-11 © IEC:2007(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .7
3 Terms, definitions and abbreviated terms .7
4 CPF 11: Overview of installation profiles .7
5 Installation profile conventions .7
6 Conformance to installation profiles.8
Annex A (normative) CP 11/1 (TCnet) specific installation profile.9
A.1 Installation profile scope.9
A.2 Normative references .9
A.3 Installation profile terms, definitions, and abbreviated terms.9
A.4 Installation planning .9
A.4.1 Introduction .9
A.4.2 Planning requirements.9
A.4.3 Network capabilities .10
A.4.4 Selection and use of cabling components .12
A.4.5 Cabling planning documentation.16
A.4.6 Verification of cabling planning specification.16
A.5 Installation implementation .16
A.5.1 General requirements .16
A.5.2 Cable installation.16
A.5.3 Connector installation.17
A.5.4 Terminator installation .17
A.5.5 Device installation .17
A.5.6 Coding and labelling .17
A.5.7 Earthing and bonding of equipment and devices and shield cabling .17
A.5.8 As-implemented cabling documentation.18
A.6 Installation verification and installation acceptance test.18
A.6.1 Introduction .18
A.6.2 Installation verification.18
A.6.3 Installation acceptance test .19
A.7 Installation administration.19
A.8 Installation maintenance and installation troubleshooting .19
Bibliography.20
Figure 1 – Standards relationships.6
Table A. 1 – Network characteristics for balanced cabling based on Ethernet .11
Table A. 2 – Network characteristics for optical fibre cabling.11
Table A. 3 – Information relevant to copper cable: fixed cables.12
Table A. 4 – Information relevant to copper cable: cords.12
Table A. 5 – Information relevant to optical fibre cables .13
Table A. 6 – Connectors for balanced cabling CPs based on Ethernet .14
---------------------- Page: 8 ----------------------
SIST EN 61784-5-11:2008
61784-5-11 © IEC:2007(E) – 3 –
Table A. 7 – Optical fibre connecting hardware .14
Table A. 8 – Recommended minimum distances specific for CP 11/1.16
---------------------- Page: 9 ----------------------
SIST EN 61784-5-11:2008
– 4 – 61784-5-11 © IEC:2007(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS – PROFILES
Part 5-11: Installation of fieldbuses – Installation profiles for CPF 11
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61784-5-11 has been prepared by subcommittee 65C: Industrial
networks, of IEC technical committee 65: Industrial process measurement, control and
automation.
This standard is to be used in conjunction with IEC 61918:2007.
The text of this standard is based on the following documents:
FDIS Report on voting
65C/471/FDIS 65C/482/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61784-5 series, under the general title Industrial communication
networks – Profiles – Installation of fieldbuses, can be found on the IEC website.
---------------------- Page: 10 ----------------------
SIST EN 61784-5-11:2008
61784-5-11 © IEC:2007(E) – 5 –
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 11 ----------------------
SIST EN 61784-5-11:2008
– 6 – 61784-5-11 © IEC:2007(E)
INTRODUCTION
This International Standard is one of a series produced to facilitate the use of communication
networks in industrial control systems.
IEC 61918:2007 (Ed. 1.0) provides the common requirements for the installation of
communication networks in industrial control systems. This installation profile standard
provides the installation profiles of the communication profiles (CP) of a specific
communication profile family (CPF) by stating which requirements of IEC 61918 fully apply
and, where necessary, by supplementing, modifying, or replacing the other requirements (see
Figure 1).
For general background on fieldbuses, their profiles, and relationship between the installation
profiles specified in this standard, see IEC/TR 61158-1.
Each CP installation profile is specified in a separate annex of this standard. Each annex is
structured exactly as the reference standard IEC 61918 for the benefit of the persons
representing the roles in the fieldbus installation process as defined in IEC 61918 (planner,
installer, verification personnel, validation personnel, maintenance personnel, administration
personnel). By reading the installation profile in conjunction with IEC 61918, these persons
immediately know which requirements are common for the installation of all CPs and which
are modified or replaced. The conventions used to draft this standard are defined in Clause 5.
The provision of the installation profiles in one standard for each CPF (e.g. IEC 61784-5-11
for CPF 11), allows readers to work with standards of a convenient size.
DEDESSIIGGNN
DEDESSIIGGNN PPLLAANNINNINGNG,, E ETTC.C.
GGEENENERIC RIC
OFOFFFIICCE PE PRREMEMISISESES
CACABBLLIINNGG
ISISOO/IE/IECC 1180111801
ISISOO/IE/IECC
14763-14763-22
BEBETWTWEEEENN
AUTAUTOOMMAATTIOIONN ISISOO/IE/IECC 2470224702
ISISLLAANDNDSS
BEBETWTWEEEENN
IEIEC 61784C 61784--5 5
AUTAUTOOMMAATTIOIONN
IEIEC 619C 6191818
ININDDUUSSTTRRIIAALL PR PREMEMISISESES IEC 6IEC 61158 1158
serseriesies
ISISLLAANDNDSS
serseriesies
InInststallatallatioionn
anandd
prprofofiilleess
((CoCommmmonon
WITWITHHININ
IEC 617IEC 61784-84-1,1, - -22 ((SSelelectectiion +on +
rreequiquirreemmeentntss))
AUTAUTOOMMAATTIOIONN
Add/Add/ReReplpl//MMod)od)
ISISLLAANDNDSS
CoCommmmon ston strruuctctururee
AAPPLPPLICICAATTIIOONN--SPSPECECIFIFICIC
CACABBLLIINNGG
Figure 1 – Standards relationships
---------------------- Page: 12 ----------------------
SIST EN 61784-5-11:2008
61784-5-11 © IEC:2007(E) – 7 –
INDUSTRIAL COMMUNICATION NETWORKS – PROFILES
Part 5-11: Installation of fieldbuses – Installation profiles for CPF 11
1 Scope
1
This part of IEC 61784 specifies the installation profile for CPF 11 (TCnet ).
The installation profile is specified in the annex. This annex is read in conjunction with
IEC 61918:2007.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 61918:2007, Industrial communication networks – Installation of communication networks
in industrial premises
The normative references of IEC 61918:2007, Clause 2, apply. For profile specific normative
references see Clauses A.2.
3 Terms, definitions and abbreviated terms
For the purpose of this document, the terms, definitions and abbreviated terms of
IEC 61918:2007, Clause 3, apply.
4 CPF 11: Overview of installation profiles
CPF 11 consists of one
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.