SIST EN 4138:2016

Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

This standard specifies the characteristics of screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated.
Classification: 1 100 MPa  ) / 235 °C  )

Luft- und Raumfahrt - Flachkopfschrauben, mit Flügelkreuzschlitz, mittlere Gewindelänge, aus legiertem Stahl, verkadmet - Klasse: 1 100 MPa (bei Raumtemperatur) / 235 °C

Diese Europäische Norm legt die Eigenschaften von Flachkopfschrauben mit Flügelkreuzschlitz und mittlerer Gewindelänge aus legiertem Stahl, verkadmet, fest.
Klasse: 1 100 MPa )/235 °C )

Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, tige normale à tolérance large, filetage moyen, en acier allié, cadmiées - Classification: 1 100 MPa (à température ambiante) / 235 °C

Cette Norme Européenne spécifie les caractéristiques des vis à tête cylindrique, à empreinte cruciforme déportée, tige normale à tolérance large, filetage moyen, en acier allié, cadmiées.
Classification : 1 100 MPa  1) / 235 °C  2).

Aeronavtika - Vijaki, valjasta glava, križna zareza, široka toleranca, srednja navojna dolžina, iz legiranega jekla, prevlečeni s kadmijem - Klasifikacija: 1100 MPa (pri temperaturi okolice)/235 °C

Ta standard določa značilnosti vijakov: valjasta glava, križna zareza, široka toleranca, srednja navojna dolžina, iz legiranega jekla, prevlečenega s kadmijem.
Klasifikacija: 1100 MPa 1)/235 °C).

General Information

• Status: Published
• Publication Date: 20-Apr-2016
• ICS: 49.025.10 - Steels
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 08-Apr-2016
• Due Date: 13-Jun-2016
• Completion Date: 21-Apr-2016
• Ref Project: EN 4138:2016 - Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

Relations

• Replaces: SIST EN 4138:2010 - Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
• Effective Date: 01-May-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4138:2016
01-maj-2016
1DGRPHãþD
SIST EN 4138:2010
$HURQDYWLND9LMDNLYDOMDVWDJODYDNULåQD]DUH]DãLURNDWROHUDQFDVUHGQMD
QDYRMQDGROåLQDL]OHJLUDQHJDMHNODSUHYOHþHQLVNDGPLMHP.ODVLILNDFLMD
03DSULWHPSHUDWXULRNROLFHƒ&
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal
shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa
(at ambient temperature) / 235 °C
Luft- und Raumfahrt - Flachkopfschrauben, mit Flügelkreuzschlitz, mittlere
Gewindelänge, aus legiertem Stahl, verkadmet - Klasse: 1 100 MPa (bei
Raumtemperatur) / 235 °C
Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, tige normale
à tolérance large, filetage moyen, en acier allié, cadmiées - Classification: 1 100 MPa (à
température ambiante) / 235 °C
Ta slovenski standard je istoveten z: EN 4138:2016
ICS:
49.025.10 Jekla Steels
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN 4138:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4138:2016

---------------------- Page: 2 ----------------------

SIST EN 4138:2016


EN 4138
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2016
EUROPÄISCHE NORM
ICS 49.030.20 Supersedes EN 4138:2009
English Version

Aerospace series - Screws, pan head, offset cruciform
recess, coarse tolerance normal shank, medium length
thread, in alloy steel, cadmium plated - Classification: 1
100 MPa (at ambient temperature) / 235 °C
Série aérospatiale - Vis à tête cylindrique, à empreinte Luft- und Raumfahrt - Flachkopfschrauben, mit
cruciforme déportée, tige normale à tolérance large, Flügelkreuzschlitz, mittlere Gewindelänge, aus
filetage moyen, en acier allié, cadmiées - Classification: legiertem Stahl, verkadmet - Klasse: 1 100 MPa (bei
1 100 MPa (à température ambiante) / 235 °C Raumtemperatur) / 235 °C
This European Standard was approved by CEN on 27 September 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4138:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4138:2016
EN 4138:2016 (E)
Contents Page
European Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Required characteristics . 5
4 Designation. 8
5 Marking . 8
6 Technical specification . 9
Annex A (informative) Standard evolution form . 10



2

---------------------- Page: 4 ----------------------

SIST EN 4138:2016
EN 4138:2016 (E)
European Foreword
This document (EN 4138:2016) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by September 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 4138:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 4138:2016
EN 4138:2016
...