SIST EN 60684-3-116 & 117:2004
(Main)Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 116 and 117: Extruded polychloroprene - General purpose
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 116 and 117: Extruded polychloroprene - General purpose
Supersedes HD 523.3.116 to 118 S1:1993
Isolierschläuche -- Teil 3: Bestimmungen für einzelne Schlauchtypen -- Blätter 116 und 117: Extrudierte Polypropylenschläuche für allgemeine Anwendungen
Gaines isolantes souples -- Partie 3: Spécifications pour types particuliers de gaines -- Feuilles 116 et 117: Polychloroprène extrudé - Utilisation générale
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 116. in 117. list: Ekstrudirani polipropilen za splošne namene (IEC 60684-3-116 and 117:2003)
General Information
Relations
Standards Content (Sample)
SIST EN 60684-3-116 & 117:2004SLOVENSKIseptember 2004
STANDARDGibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 116. in 117. list: Ekstrudirani polipropilen za splošne namene (IEC 60684-3-116 and 117:2003)Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose (IEC 60684-3-116 and 117:2003)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 60684-3-116 & 117:2004(en)ICS29.035.20
EUROPEAN STANDARD
EN 60684-3-116 & 117 NORME EUROPÉENNE EUROPÄISCHE NORM
July 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60684-3-116 & 117:2003 E
ICS 29.035.20 Supersedes HD 523.3.116 to 118 S1:1993
English version
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 116 and 117: Extruded polychloroprene -
General purpose (IEC 60684-3-116 & 117:2003)
Gaines isolantes souples Partie 3: Spécifications pour types particuliers de gaines Feuilles 116 et 117: Polychloroprène extrudé -
Utilisation générale (CEI 60684-3-116 & 117:2003)
Isolierschläuche Teil 3: Bestimmungen für einzelne Schlauchtypen Blätter 116 und 117: Extrudierte Polypropylenschläuche für allgemeine Anwendungen (IEC 60684-3-116 & 117:2003)
This European Standard was approved by CENELEC on 2003-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
EN 60684-3-116 & 117:2003 - 2 - Foreword The text of document 15C/1467/FDIS, future edition 2 of IEC 60684-3-116 and 117, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60684-3-116 and 117 on 2003-07-01.
This European Standard supersedes HD 523.3.116 to 118 S1:1993.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2004-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2006-07-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. __________
Endorsement notice
The text of the International Standard IEC 60684-3-116 and 117:2003 was approved by CENELEC as a European Standard without any modification. __________
- 3 - EN 60684-3-116 & 117:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60684-1 - 1) Flexible insulating sleeving Part 1: Definitions and general requirements
EN 60684-1 2003 2) IEC 60684-2 1997 Part 2: Methods of test
EN 60684-2 1997 IEC 60757 1983 Code for designation of colours
HD 457 S1 1985
1) Undated reference. 2) Valid edition at date of issue.
NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD60684-3-116et/and 117Deuxième éditionSecond edition2003-04Gaines isolantes souples –Partie 3:Spécifications pour types particuliers de gaines –Feuilles 116 et 117:Polychloroprène extrudé – Utilisation généraleFlexible insulating sleeving –Part 3:Specifications for individual types of sleeving –Sheets 116 and 117:Extruded polychloroprene – General purposePour prix, voir catalogue en vigueurFor price, see current catalogue IEC 2003
Droits de reproduction réservés
Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photocopie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized in anyform or by any means, electronic or mechanical, includingphotocopying and microfilm, without permission in writing fromthe publisher.International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11
Telefax: +41 22 919 03 00
E-mail: inmail@iec.ch
Web: www.iec.chCODE PRIXPRICE CODEHCommission Electrotechnique InternationaleInternational Electrotechnical Commission
60684-3-116 and 117 IEC:2003– 3 –CONTENTSFOREWORD.5INTRODUCTION.71Scope.92Normative references.93Designation.94Requirements.115Sleeving conformance.11Table 1 – Dimensional requirements.11Table 2 – Requirements.13
60684-3-116 and 117 IEC:2003– 5 –INTERNATIONAL ELECTROTECHNICAL COMMISSION____________FLEXIBLE INSULATING SLEEVING –Part 3: Specifications for individual types of sleeving –Sheets 116 and 117: Extruded polychloroprene –General purposeFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborate
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.