kSIST FprEN 301 489-19 V2.2.1:2022

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band providing positioning, navigation, and timing data - Harmonised Standard for ElectroMagnetic Compatibility

REN/ERM-EMC-406

Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 19. del: Posebni pogoji za sprejemne mobilne zemeljske postaje (ROMES), ki delujejo v pasu 1,5 GHz in zagotavljajo podatkovne komunikacije, ter za sprejemnike GNSS, ki delujejo v pasu RNSS (ROGNSS) in zagotavljajo določanje položaja, navigacijo in časovne podatke - Harmonizirani standard za elektromagnetno združljivost

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Nov-2020
• ICS: 33.060.01 - Radiocommunications in general
• ICS: 33.070.40 - Satellite
• ICS: 33.100.01 - Electromagnetic compatibility in general
• Technical Committee: MOC - Mobile Communications
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 04-Jul-2022
• Due Date: 22-Aug-2022
• Ref Project: ETSI EN 301 489-19 V2.2.1 (2022-07) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band providing positioning, navigation, and timing data; Harmonised Standard for ElectroMagnetic Compatibility

Standards Content (sample)

Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 19: Specific conditions for Receive Only Mobile
Earth Stations (ROMES) operating in the 1,5 GHz band
providing data communications and GNSS receivers operating
in the RNSS band providing positioning, navigation,
and timing data;
Harmonised Standard for ElectroMagnetic Compatibility
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
Reference
REN/ERM-EMC-406
Keywords
data, earth station, EMC, GNSS, harmonised
standard, mobile, MSS, radio, receiver,
regulation, satellite, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone] Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
Contents

Intellectual Property Rights ................................................................................................................................ 4

Foreword ............................................................................................................................................................. 4

Modal verbs terminology .................................................................................................................................... 4

1 Scope ........................................................................................................................................................ 5

2 References ................................................................................................................................................ 5

2.1 Normative references ......................................................................................................................................... 5

2.2 Informative references ........................................................................................................................................ 6

3 Definition of terms, symbols and abbreviations ....................................................................................... 6

3.1 Terms .................................................................................................................................................................. 6

3.2 Symbols .............................................................................................................................................................. 6

3.3 Abbreviations ..................................................................................................................................................... 7

4 Test conditions ......................................................................................................................................... 7

4.1 General ............................................................................................................................................................... 7

4.2 Arrangements for test signals ............................................................................................................................. 7

4.2.0 General .......................................................................................................................................................... 7

4.2.1 Arrangements for test signals at the input of ROMES and GNSS receivers ................................................. 7

4.2.2 Arrangements for test signals at the output of ROMES and GNSS receivers............................................... 8

4.3 Exclusion bands .................................................................................................................................................. 8

4.3.0 General .......................................................................................................................................................... 8

4.3.1 Receiver exclusion bands .............................................................................................................................. 8

4.3.1.1 General .................................................................................................................................................... 8

4.3.1.2 GNSS exclusion bands ............................................................................................................................ 8

4.3.1.3 ROMES Exclusion Bands ....................................................................................................................... 9

4.3.1.4 Combined Equipment GNSS & ROMES ................................................................................................ 9

4.3.1.5 Exclusion Bands Summary ..................................................................................................................... 9

4.4 Narrow band responses of receivers ................................................................................................................... 9

4.5 Normal test modulation .................................................................................................................................... 10

5 Performance assessment ......................................................................................................................... 10

5.1 General ............................................................................................................................................................. 10

5.2 Ancillary equipment ......................................................................................................................................... 10

6 Performance criteria ............................................................................................................................... 10

6.0 Introduction ...................................................................................................................................................... 10

6.1 Performance criteria for Continuous phenomena ............................................................................................. 10

6.2 Performance criteria for Transient phenomena ................................................................................................ 10

7 Applicability overview ........................................................................................................................... 11

7.1 Emission ........................................................................................................................................................... 11

7.1.1 General ........................................................................................................................................................ 11

7.2 Immunity .......................................................................................................................................................... 11

Annex A (informative): Relationship between the present document and the essential

requirements of Directive 2014/53/EU ......................................................... 13

Annex B (informative): Bibliography ................................................................................................... 15

Annex C (informative): Change history ............................................................................................... 16

History .............................................................................................................................................................. 17

ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
Intellectual Property Rights
Essential patents

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (https://ipr.etsi.org/).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Trademarks

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

Foreword

This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic

compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote

phase of the ETSI standards EN Approval Procedure.

The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.2] to

provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation

of the laws of the Member States relating to the making available on the market of radio equipment and repealing

Directive 1999/5/EC [i.1].

Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with

the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present

document, a presumption of conformity with the corresponding essential requirements of that Directive and associated

EFTA regulations.

The present document is part 19 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa

Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
1 Scope

The present document covers the assessment of Receive Only Mobile Earth Stations (ROMES) and Global Navigation

Satellite System (GNSS) receivers in respect of electromagnetic compatibility.

ROMES operate in the Land Mobile Satellite Service (LMSS) space to earth bands, 1 518 MHz - 1 559 MHz, allocated

by the ITU Radio Regulations [i.3]. ROMES operate as part of a satellite system providing one way data

communications.

Global Navigation Satellite System (GNSS) receivers operate in either or both of the space to earth RNSS frequency

bands of 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz defined as "A radiodetermination-satellite service

used for the purpose of radionavigation" (article 1.43 of ITU Radio Regulations [i.3]) with the ability to receive any

GNSS (e.g. Galileo, Global Positioning System (GPS), BeiDou (BDS), GLObal NAvigation Satellite System

(GLONASS), Space Based Augmentation Systems (SBAS)).

Technical specifications related to the antenna port and emissions from the enclosure port of ROMES and GNSS are not

included in the present document. Such technical specifications are found in the relevant product standards for the

effective use of the radio spectrum.

The present document specifies the applicable test conditions, performance assessment and performance criteria for

ROMES, GNSS and associated ancillary equipment.
ROMESs and GNSS can have several configurations, including:
• portable equipment;
• fixed equipment;
• a number of modules including a display/control interface to the user.

The performance criteria used in the present document require that the satellite communications system of which the

ROMES and GNSS is a part provides reliable delivery of data or messages.

The environmental classification and the emission and immunity requirements used in the present document are as

stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.

NOTE: The relationship between the present document and essential requirements of article 3.1(b) of Directive

2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references

References are either specific (identified by date of publication and/or edition number or version number) or non-

specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

Referenced documents which are not found to be publicly available in the expected location might be found at

https://docbox.etsi.org/Reference/.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are necessary for the application of the present document.

[1] ETSI EN 301 489-1 (V2.2.3): "ElectroMagnetic Compatibility (EMC) standard for radio

equipment and services; Part 1: Common technical requirements; Harmonised Standard for

ElectroMagnetic Compatibility".
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
2.2 Informative references

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are not necessary for the application of the present document but they assist the

user with regard to a particular subject area.

[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the

harmonisation of the laws of the Member States relating to the making available on the market of

radio equipment and repealing Directive 1999/5/EC.

[i.2] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request

to the European Committee for Electrotechnical Standardisation and to the European

Telecommunications Standards Institute as regards radio equipment in support of Directive

2014/53/EU of the European Parliament and of the Council.
[i.3] ITU Radio Regulations (2016).
3 Definition of terms, symbols and abbreviations
3.1 Terms

For the purposes of the present document, the terms given in ETSI EN 301 489-1 [1] and the following apply:

ancillary equipment: electrical or electronic equipment that is intended to be used with a receiver

NOTE: It is considered as an ancillary equipment if:

 the equipment is intended for use with a receiver to provide additional operational and/or control

features to the radio equipment (e.g. to extend control to another position or location); and

 the ancillary equipment cannot be used without being connected to radio equipment to provide user

functions independently of a receiver; and

 the receiver to which it is connected, is capable of providing some intended operation such as

receiving without the ancillary equipment (i.e. it is not a sub-unit of the main equipment essential

to the main equipment basic functions).

Equipment Under Test (EUT): equipment subject to the performance requirements of the present document

fixed equipment: equipment intended for use in a fixed location and fitted with one or more antennas

portable equipment: radio equipment intended for portable use and powered by integral batteries or battery

NOTE: Devices will typically be handheld.

stand-alone radio equipment: equipment that is intended primarily as communications equipment and that is normally

used on a stand-alone basis
vehicular equipment: radio eq
...

SLOVENSKI STANDARD
oSIST prEN 301 489-19 V2.2.0:2020
01-november-2020

Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 19.

del: Posebni pogoji za sprejemne mobilne zemeljske postaje (ROMES), ki delujejo
v pasu 1,5 GHz in zagotavljajo podatkovne komunikacije, ter za sprejemnike
GNSS, ki delujejo v pasu RNSS (ROGNSS) in zagotavljajo določanje položaja,
navigacijo in časovne podatke - Harmonizirani standard za elektromagnetno
združljivost

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part

19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the

1,5 GHz band providing data communications and GNSS receivers operating in the

RNSS band providing positioning, navigation, and timing data - Harmonised Standard for

ElectroMagnetic Compatibility
Ta slovenski standard je istoveten z: ETSI EN 301 489-19 V2.2.0 (2020-09)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.070.40 Satelit Satellite
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
oSIST prEN 301 489-19 V2.2.0:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 301 489-19 V2.2.0:2020
---------------------- Page: 2 ----------------------
oSIST prEN 301 489-19 V2.2.0:2020
Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 19: Specific conditions for Receive Only Mobile
Earth Stations (ROMES) operating in the 1,5 GHz band
providing data communications and GNSS receivers operating
in the RNSS band providing positioning, navigation,
and timing data;
Harmonised Standard for ElectroMagnetic Compatibility
---------------------- Page: 3 ----------------------
oSIST prEN 301 489-19 V2.2.0:2020
2 Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
Reference
REN/ERM-EMC-406
Keywords
data, earth station, EMC, GNSS, harmonised
standard, mobile, MSS, radio, receiver,
regulation, satellite, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone] Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 301 489-19 V2.2.0:2020
3 Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
Contents

Intellectual Property Rights ................................................................................................................................ 4

Foreword ............................................................................................................................................................. 4

Modal verbs terminology .................................................................................................................................... 4

1 Scope ........................................................................................................................................................ 5

2 References ................................................................................................................................................ 5

2.1 Normative references ......................................................................................................................................... 5

2.2 Informative references ........................................................................................................................................ 6

3 Definition of terms, symbols and abbreviations ....................................................................................... 6

3.1 Terms .................................................................................................................................................................. 6

3.2 Symbols .............................................................................................................................................................. 6

3.3 Abbreviations ..................................................................................................................................................... 7

4 Test conditions ......................................................................................................................................... 7

4.1 General ............................................................................................................................................................... 7

4.2 Arrangements for test signals ............................................................................................................................. 7

4.2.0 General .......................................................................................................................................................... 7

4.2.1 Arrangements for test signals at the input of ROMES and GNSS receivers ................................................. 7

4.2.2 Arrangements for test signals at the output of ROMES and GNSS receivers............................................... 8

4.3 Exclusion bands .................................................................................................................................................. 8

4.3.0 General .......................................................................................................................................................... 8

4.3.1 Receiver exclusion bands .............................................................................................................................. 8

4.3.1.1 General .................................................................................................................................................... 8

4.3.1.2 GNSS exclusion bands ............................................................................................................................ 8

4.3.1.3 ROMES Exclusion Bands ....................................................................................................................... 9

4.3.1.4 Combined Equipment GNSS & ROMES ................................................................................................ 9

4.3.1.5 Exclusion Bands Summary ..................................................................................................................... 9

4.4 Narrow band responses of receivers ................................................................................................................... 9

4.5 Normal test modulation .................................................................................................................................... 10

5 Performance assessment ......................................................................................................................... 10

5.1 General ............................................................................................................................................................. 10

5.2 Ancillary equipment ......................................................................................................................................... 10

6 Performance criteria ............................................................................................................................... 10

6.0 Introduction ...................................................................................................................................................... 10

6.1 Performance criteria for Continuous phenomena ............................................................................................. 10

6.2 Performance criteria for Transient phenomena ................................................................................................ 10

7 Applicability overview ........................................................................................................................... 11

7.1 Emission ........................................................................................................................................................... 11

7.1.1 General ........................................................................................................................................................ 11

7.2 Immunity .......................................................................................................................................................... 11

Annex A (informative): Relationship between the present document and the essential

requirements of Directive 2014/53/EU ......................................................... 13

Annex B (informative): Bibliography ................................................................................................... 15

Annex C (informative): Change history ............................................................................................... 16

History .............................................................................................................................................................. 17

ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 301 489-19 V2.2.0:2020
4 Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
Intellectual Property Rights
Essential patents

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (https://ipr.etsi.org/).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Trademarks

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

Foreword

This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic

compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote

phase of the ETSI standards EN Approval Procedure.

The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.2] to

provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation

of the laws of the Member States relating to the making available on the market of radio equipment and repealing

Directive 1999/5/EC [i.1].

Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with

the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present

document, a presumption of conformity with the corresponding essential requirements of that Directive and associated

EFTA regulations.

The present document is part 19 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa

Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 301 489-19 V2.2.0:2020
5 Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
1 Scope

The present document covers the assessment of Receive Only Mobile Earth Stations (ROMES) and Global Navigation

Satellite System (GNSS) receivers in respect of electromagnetic compatibility.

ROMES operate in the Land Mobile Satellite Service (LMSS) space to earth bands, 1 518 MHz - 1 559 MHz, allocated

by the ITU Radio Regulations [i.3]. ROMES operate as part of a satellite system providing one way data

communications.

Global Navigation Satellite System (GNSS) receivers operate in either or both of the space to earth RNSS frequency

bands of 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz defined as "A radiodetermination-satellite service

used for the purpose of radionavigation" (article 1.43 of ITU Radio Regulations [i.3]) with the ability to receive any

GNSS (e.g. Galileo, Global Positioning System (GPS), BeiDou (BDS), GLObal NAvigation Satellite System

(GLONASS), Space Based Augmentation Systems (SBAS)).

Technical specifications related to the antenna port and emissions from the enclosure port of ROMES and GNSS are not

included in the present document. Such technical specifications are found in the relevant product standards for the

effective use of the radio spectrum.

The present document specifies the applicable test conditions, performance assessment and performance criteria for

ROMES, GNSS and associated ancillary equipment.
ROMESs and GNSS can have several configurations, including:
• portable equipment;
• fixed equipment;
• a number of modules including a display/control interface to the user.

The performance criteria used in the present document require that the satellite communications system of which the

ROMES and GNSS is a part provides reliable delivery of data or messages.

The environmental classification and the emission and immunity requirements used in the present document are as

stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.

NOTE: The relationship between the present document and essential requirements of article 3.1(b) of Directive

2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references

References are either specific (identified by date of publication and/or edition number or version number) or non-

specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

Referenced documents which are not found to be publicly available in the expected location might be found at

https://docbox.etsi.org/Reference/.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are necessary for the application of the present document.

[1] ETSI EN 301 489-1 (V2.2.3): "ElectroMagnetic Compatibility (EMC) standard for radio

equipment and services; Part 1: Common technical requirements; Harmonised Standard for

ElectroMagnetic Compatibility".
ETSI
---------------------- Page: 7 ----------------------
oSIST prEN 301 489-19 V2.2.0:2020
6 Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
2.2 Informative references

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are not necessary for the application of the present document but they assist the

user with regard to a particular subject area.

[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the

harmonisation of the laws of the Member States relating to the making available on the market of

radio equipment and repealing Directive 1999/5/EC.

[i.2] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request

to the European Committee for Electrotechnical Standardisation and to the European

Telecommunications Standards Institute as regards radio equipment in support of Directive

2014/53/EU of the European Parliament and of the Council.
[i.3] ITU Radio Regulations (2016).
3 Definition of terms, symbols and abbreviations
3.1 Terms

For the purposes of the present document, the terms given in ETSI EN 301 489-1 [1] and the following apply:

ancillary equipment: electrical or electronic equipment that is intended to be used with a receiver

NOTE: It is considered as an ancillary equipment if:

 the equipment is intended for use with a receiver to provide additional operational and/or control

features to the radio equipment (e.g. to extend control to another position or location); and

 the ancillary equipment cannot be used without being connected to radio equipment to provide user

functions independently of a receiver; and

 the receiver to which it is connected, is capable of providing some intended operation such as

receiving without the ancillary equipment (i.e. it is no
...