oSIST prEN IEC 60794-1-306:2022

Optical fibre cables - Part 1-306: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon torsion, Method G6

Lichtwellenleiterkabel - Teil 1-306: Fachgrundspezifikation - Grundlegende Prüfverfahren für optische Kabel - Prüfverfahren für Kabelelemente - Bändertorsion, Verfahren G6

Câbles à fibres optiques - Partie 1-306: Spécification générique - Procédures fondamentales d'essai des câbles optiques - Méthodes d'essai des éléments de câbles - Torsion du ruban, Méthode G6

Optični kabli - 1-306. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Preskusne metode za kabelske elemente - Zasuk traku, metoda G6

General Information

• Status: Not Published
• Public Enquiry End Date: 06-Oct-2022
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: MOC - Mobile Communications
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 27-Jul-2022
• Due Date: 14-Dec-2022
• Completion Date: 06-Oct-2022
• Ref Project: prEN IEC 60794-1-306:2022 - Optical fibre cables - Part 1-306: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon torsion, Method G6

Relations

• Revised: SIST EN IEC 60794-1-23:2020 - Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods (IEC 60794-1-23:2019)
• Effective Date: 19-Jul-2022

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-306:2022
01-oktober-2022
Kabli iz optičnih vlaken - 1-306. del: Splošna specifikacija - Osnovni preskusni
postopki za optične kable - Preskusne metode za kabelske elemente - Zasuk traku,
metoda G6
Optical fibre cables - Part 1-306: Generic specification - Basic optical cable test
procedures - Cable element test methods - Ribbon torsion, Method G6
Câbles à fibres optiques - Partie 1-306: Spécification générique - Procédures
fondamentales d'essai des câbles optiques - Méthodes d'essai des éléments de câbles -
Torsion du ruban, Méthode G6
Ta slovenski standard je istoveten z: prEN IEC 60794-1-306:2022
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-306:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60794-1-306:2022

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60794-1-306:2022
86A/2214/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-306 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-07-15 2022-10-07
SUPERSEDES DOCUMENTS:
86A/2168/CD, 86A/2205/CC

IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Optical fibre cables - Part 1-306: Generic specification - Basic optical cable test procedures -
Cable element test methods - Ribbon torsion, Method G6

PROPOSED STABILITY DATE: 2025

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60794-1-306:2022
IEC CDV 60794-1-306/Ed1 © IEC 2022 – 2 –  86A/2214/CDV
1 CONTENTS
2
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 4 General requirements . 5
8 5 Sample . 5
9 6 Apparatus . 6
10 7 Procedure . 6
11 8 Requirements . 7
12 9 Details to be specified . 7
13 Bibliography . 8
14
15 Figure 1 – Torsion test . 6
16
17
18
19
20

---------------------- Page: 4 ----------------------
oSIST prEN IEC 60794-1-306:2022
IEC CDV 60794-1-306/Ed1 © IEC 2022 – 3 –  86A/2214/CDV
21 INTERNATIONAL ELECTROTECHNICAL COMMISSION
22 ____________
23
24 OPTICAL FIBRE CABLES
25 Part 1-306: Generic specification - Basic optical cable test procedures–
26 Cable element test methods– Ribbon torsion, Method G6
27
28 FOREWORD
29 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
30 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
31 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
32 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
33 Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
34 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
35 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
36 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
37 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
38 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
39 consensus of opinion on the relevant subjects since each technical committee has representation from all
40 interested IEC National Committees.
41 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
42 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
43 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
44 misinterpretation by any end user.
45 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
46 transparently to the maximum extent possible in their national and regional publications. Any divergence between
47 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
48 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
49 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
50 services carried out by independent certification bodies.
51 6) All users should ensure that they have the latest edition of this publication.
52 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
53 members of its technical committees and IEC National Committees for any personal injury, property damage or
54 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
55 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
56 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
57 indispensable for t
...