SIST EN IEC 63267-1:2023
(Main)Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend loss multimode fibres - Part 1: Optical interfaces for 50 um core diameter fibres - General and guidance (IEC 63267-1:2023)
Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend loss multimode fibres - Part 1: Optical interfaces for 50 um core diameter fibres - General and guidance (IEC 63267-1:2023)
This part of IEC 63267 covers multimode fibre optic connection interfaces. It includes references, document structure details, definitions, and standardised optical connection grades.
The grades are based on random mated connections between two optical connector populations according to prescribed characteristics including the core diameter and numerical aperture mismatches.
The document describes the rules under which an optical interface is created.
It also defines standardised test methods where appropriate.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Optische Schnittstellen für Steckverbinder - Teil 1: Optische Schnittstellen für Mehrmodenfasern - Allgemeines und Leitlinien (IEC 63267-1:2023)
Dispositifs d'interconnexion et composants passifs fibroniques – Interfaces optiques de connecteurs fibroniques - Partie 1: Fibres multimodales de diamètre de coeur de 50 μm à performances améliorées en matière de pertes par macrocourbures – Généralités et recommandations (IEC 63267-1:2023)
IEC 63267-1:2023 couvre les interfaces de connexion fibroniques multimodales de diamètre de cœur de 50 µm à performances améliorées en matière de pertes par macrocourbures. Elle comprend les références, les détails de la structure du document, les définitions et les classes normalisées de connexion optique. Les classes sont fondées sur des connexions accouplées sans choix préalable entre deux populations de connecteurs optiques selon des caractéristiques exigées, notamment le diamètre du cœur et les défauts d'adaptation d'ouverture numérique. Le présent document décrit les règles qui régissent la création d'une interface optique. Il définit également les méthodes d'essais normalisées, le cas échéant.
Optični spojni elementi in pasivne komponente - Vmesniki optičnih konektorjev za izboljšana mnogorodovna optična vlakna zaradi upogibanja - 1. del: Optični vmesniki za vlakna s premerom jedra 50 μm - Splošno in navodila (IEC 63267-1:2023)
Ta del standarda IEC 63267 obravnava vmesnike za povezovanje večžilnih optičnih vlaken. Zajema sklicevanja, podrobnosti o strukturi dokumenta, definicije in standardizirane razrede optičnih povezav.
Razredi temeljijo na naključno spojenih povezavah med dvema populacijama optičnih konektorjev glede na predpisane značilnosti, vključno s premerom jedra in neujemanji numeričnih apertur.
V dokumentu so opisana pravila za ustvarjanje optičnega vmesnika.
Poleg tega opredeljuje standardizirane preskusne metode, kjer je to ustrezno.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 63267-1:2023
01-september-2023
Optični spojni elementi in pasivne komponente - Vmesniki optičnih konektorjev za
izboljšana mnogorodovna optična vlakna zaradi upogibanja - 1. del: Optični
vmesniki za vlakna s premerom jedra 50 μm - Splošno in navodila (IEC 63267-
1:2023)
Fibre optic interconnecting devices and passive components - Connector optical
interfaces for enhanced macro bend loss multimode fibres - Part 1: Optical interfaces for
50 um core diameter fibres - General and guidance (IEC 63267-1:2023)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Optische Schnittstellen
für Steckverbinder - Teil 1: Optische Schnittstellen für Mehrmodenfasern - Allgemeines
und Leitlinien (IEC 63267-1:2023)
Dispositifs d'interconnexion et composants passifs fibroniques – Interfaces optiques de
connecteurs fibroniques - Partie 1: Fibres multimodales de diamètre de coeur de 50 μm
à performances améliorées en matière de pertes par macrocourbures – Généralités et
recommandations (IEC 63267-1:2023)
Ta slovenski standard je istoveten z: EN IEC 63267-1:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 63267-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 63267-1:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 63267-1:2023
EUROPEAN STANDARD EN IEC 63267-1
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2023
ICS 33.180.10
English Version
Fibre optic interconnecting devices and passive components -
Fibre optic connector optical interfaces - Part 1: Enhanced
macro bend loss multimode 50 µm core diameter fibres -
General and guidance
(IEC 63267-1:2023)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Interfaces optiques de connecteurs fibroniques Bauteile - Optische Schnittstellen für Steckverbinder - Teil
- Partie 1: Fibres multimodales de diamètre de coeur de 50 1: Verbesserter Makro-Biegeverlust bei Mehrmodenfasern
µm à performances améliorées en matière de pertes par mit 50 µm Kerndurchmesser - Allgemeines und Leitlinien
macrocourbures - Généralités et recommandations (IEC 63267-1:2023)
(IEC 63267-1:2023)
This European Standard was approved by CENELEC on 2023-06-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63267-1:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 63267-1:2023
EN IEC 63267-1:2023 (E)
European foreword
The text of document 86B/4657/FDIS, future edition 1 of IEC 63267-1, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 63267-1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-03-15
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-06-15
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.