SIST EN ISO 10511:2001

Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:1997)

IEC 60695-10-2:2014-02(en-fr) specifies the ball pressure test as a method for evaluating the softening temperature and accelerated material flow under load of polymeric materials and parts of end products in their ability to resist abnormal heat. It is applicable to the materials used in electrotechnical equipment, subassemblies and components, and to solid electrical insulating materials except ceramics.The Ball Pressure test method is not appropriate for certain elastomers, foamed materials, and other materials that tend to be soft at room temperature. Product Committees are encouraged to evaluate these materials using other methods such as IEC 60695-10-3.
This third edition cancels and replaces the second edition of IEC 60695-10-2 published in 2003. It constitutes a technical revision.
The main changes with respect to the previous edition are as follows:
- The addition of an introduction introduces the user to the basic guidance documents published by TC 89,
- Addition of a reference to IEC Guide 104 and ISO/IEC Guide 51 in the Scope,
- Additional relevant Terms and Definitions in new Clause 3,
- 5.2: Additional requirements to the test specimen support at the suggestion of IECEE-CTL to improve reproducibility,
- 5.3: Clarification of heating oven requirements at the suggestion of IECEE-CTL to improve reproducibility,
- 5.4: Specification of minimum resolution consistent with method requirements for optical measurement instrument,
- New Test Procedure in Clauses 6 and 8 which introduces separate methods for End Product proof testing (Method A) and material performance testing (Method B) and
- Updated Clause 11 Test Report to be consistent with other IEC 60695 documents.
This standard has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51.
Key words: Abnormal heat, Ball pressure test method, Fire hazard

Sechskantmuttern mit Klemmteil niedrige Form (mit nichtmetallischem Einsatz) (ISO 10511:1997)

Diese Internationale Norm beschreibt die Eigenschaften von niedrigen Sechskantmuttern mit Klemmteil, mit nichtmetallischem Einsatz, und Gewinde von M3 bis M36, in Produktklasse A für Gewinde bis M 16 und Produktklasse B für Gewinde ü~ber M 16 und Festigkeitsklassen 04 und 05. Anmerkung: Die Maße der Muttern entsprechen den in ISO 4035 angegebenen Maßen plus Klemmteil. Werden in besonderen Fällen andere Festlegungen benötigt, so sind diese den bestehenden Internationalen Normen zu entnehmen, z.B. ISO 261, ISO 965-2, ISO 2320, ISO 4759-1.

Ecrous hexagonaux bas autofreinés (avec anneau non métallique) (ISO 10511:1997)

La présente Norme internationale prescrit les caractéristiques des écrous hexagonaux bas autofreinés (à anneau non métallique) de filetage M3 à M36 inclus, de grade A pour filetages < M16 et de grade B pour filetages > M16, et de classes de qualité 04 et 05.
NOTE -- Les dimensions des écrous sont conformes à celles données dans l'ISO 4035 plus le système de freinage. Si d'autres spécifications sont requises, il est recommandé de les choisir dans les Normes internationales existantes, par exemple ISO 261, ISO 965-2, ISO 2320 et ISO 4759-1.

Šestrobe zaščitne nizke matice s plastičnim vložkom (ISO 10511:1997)

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2001
• Withdrawal Date: 25-Jun-2013
• ICS: 21.060.20 - Nuts
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 21-Jun-2013
• Due Date: 14-Jul-2013
• Completion Date: 26-Jun-2013
• Ref Project: EN ISO 10511:1997 - Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:1997)

Relations

• Replaced By: SIST EN ISO 10511:2013 - Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012)
• Effective Date: 08-Jun-2022
• Replaced By: SIST EN ISO 10511:2013 - Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012)
• Effective Date: 01-Jul-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10511:2001
01-julij-2001
âHVWUREH]DãþLWQHQL]NHPDWLFHVSODVWLþQLPYORåNRP,62
Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:1997)
Sechskantmuttern mit Klemmteil niedrige Form (mit nichtmetallischem Einsatz) (ISO
10511:1997)
Ecrous hexagonaux bas autofreinés (avec anneau non métallique) (ISO 10511:1997)
Ta slovenski standard je istoveten z: EN ISO 10511:1997
ICS:
21.060.20 Matice Nuts
SIST EN ISO 10511:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10511:2001

---------------------- Page: 2 ----------------------

SIST EN ISO 10511:2001

---------------------- Page: 3 ----------------------

SIST EN ISO 10511:2001

---------------------- Page: 4 ----------------------

SIST EN ISO 10511:2001

---------------------- Page: 5 ----------------------

SIST EN ISO 10511:2001

---------------------- Page: 6 ----------------------

SIST EN ISO 10511:2001
INTERNATIONAL ISO
STANDARD 10511
First edition
1997-11-15
Prevailing torque type hexagon thin nuts
(with non-metallic insert)
Écrous hexagonaux bas autofreinés (à anneau non métallique)
A
Reference number
ISO 10511:1997(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 10511:2001
ISO 10511:1997(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 10511 was prepared by Technical Committee
ISO/TC 2, Fasteners, Subcommittee SC 1, Mechanical properties of
fasteners.
Annex A of this International Standard is for information only.
©  ISO 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 10511:2001
©
INTERNATIONAL STANDARD  ISO ISO 10511:1997(E)
Prevailing torque type hexagon thin nuts (with
non-metallic insert)
1 Scope
This International Standard specifies the characteristics of prevailing torque type hexagon thin nuts (with
non-metallic insert) with thread from M3 up to and including M36, in product grade A for threads up to
and including M16 and product grade B for threads above M16, and with property classes 04 and 05.
NOTE —  The dimensions of the nuts correspond to those given in ISO 4035 plus prevailing torque feature.
If other specifications are required, they should be selected from existing International Standards, for example
ISO 261, ISO 965-2, ISO 2320 and ISO 4759-1.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this
International Standard. At the time of publication, the editions indicated were valid. All standards are subject
to revision, and parties to agreements based on this International Standard are
...