SIST EN 3464:2010

Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm

This standard specifies the requirements relating to:
Titanium alloy TI-P64001 (Ti-6Al-4V)
Annealed
Plate
6 mm < a = or < 100 mm
for aerospace applications.

Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglüht - Platten - 6 mm < a ≤ 100 mm

Diese Norm legt die Anforderungen an
Titanlegierung TI P64001 (Ti 6Al 4V)
Geglüht
Platten
6 mm < a < oder = 100 mm
für die Anwendung in der Luft  und Raumfahrt fest.

Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Plaques - 6 mm < a ≤ 100 mm

Aeronavtika - Titanova zlitina TI-P64001 (Ti-6Al-4V) - Žarjena - Plošča - 6 mm < a ≤ 100 mm

Ta evropski standard določa zahteve, ki se nanašajo na: titanovo zlitino TI-P64001 (Ti-6Al-4V), žarjena plošča 6 mm < a ≤ 100 mm.

General Information

• Status: Withdrawn
• Publication Date: 18-Nov-2009
• Withdrawal Date: 03-Sep-2012
• ICS: 49.025.30 - Titanium
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 03-Sep-2012
• Due Date: 26-Sep-2012
• Completion Date: 04-Sep-2012
• Ref Project: EN 3464:2009 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm

Relations

• Replaced By: SIST EN 3464:2012 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm
• Effective Date: 01-Oct-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 3464:2009SIST EN 3464:2010en,de01-januar-2010SIST EN 3464:2010SLOVENSKI
STANDARD



SIST EN 3464:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3464
October 2009 ICS 49.025.30 English Version
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm
Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Plaques - 6 mm < a ≤ 100 mm
Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglüht - Platten - 6 mm < a ≤ 100 mm This European Standard was approved by CEN on 5 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3464:2009: ESIST EN 3464:2010



EN 3464:2009 (E) 2 Foreword This document (EN 3464:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2010, and conflicting national standards shall be withdrawn at the latest by April 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3464:2010



EN 3464:2009 (E) 3 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-4. SIST EN 3464:2010



EN 3464:2009 (E) 4 1 Scope This European Standard specifies the requirements relating to: Titanium alloy TI-P64001 (Ti-6Al-4V) Annealed Plate 6 mm < a ≤ 100 mm for aerospace applications. 2 Normative references The following referenced documents are indispensable for the
...