SIST EN 12196:2003
(Main)Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods
Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods
This European Standard specifies functional requirements (see clause 3) and specific safety requirements for four types of horses and bucks (see Table 1) in addition to the general safety requirements in EN 913.
Turngeräte - Pferde und Böcke - Funktionelle und sicherheitstechnische Anforderungen, Prüfverfahren
Diese Europäische Norm legt funktionelle Anforderungen (siehe Abschnitt 3) und besondere sicherheitstechnische Anforderungen an vier Typen von Pferden und Böcken (siehe Tabelle 1) zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen in EN 913 fest.
Matériel de gymnastique - Chevaux et moutons - Exigences fonctionnelles et de sécurité, méthodes d'essai
Gimnastična oprema - Konji in koze – Funkcionalne in varnostne zahteve, preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methodsKWHYHMatériel de gymnastique - Chevaux et moutons - Exigences fonctionnelles et de sécurité, méthodes d'essaiTurngeräte - Pferde und Böcke - Funktionelle und sicherheitstechnische Anforderungen, PrüfverfahrenTa slovenski standard je istoveten z:EN 12196:2003SIST EN 12196:2003en97.220.30ICS:SIST EN 12196:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 12196:200301-julij-2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12196February 2003ICS 97.220.30Supersedes EN 12196:1997English versionGymnastic equipment - Horses and bucks - Functional andsafety requirements, test methodsMatériel de gymnastique - Chevaux et moutons -Exigences fonctionnelles et de sécurité, méthodes d'essaiTurngeräte - Pferde und Böcke - Funktionelle undsicherheitstechnische Anforderungen, PrüfverfahrenThis European Standard was approved by CEN on 12 December 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12196:2003 E
EN 12196:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Requirements.43.1Classification.43.2Dimensions.63.3Performance of padded horse and buck top.74Safety requirements.74.1General.74.2Stability.74.3Strength.75Test methods.75.1Determination of stability.75.2Determination of strength.86Information to be provided by the manufacturer/supplier.97Marking.9Annex A (informative)
Examples of cross sections.10
EN 12196:2003 (E)3ForewordThis document (EN 121
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.