SIST ISO 3609:1995

Polypropylene (PP) pipes -- Tolerances on outside diameters and wall thicknesses

Tubes en polypropylène (PP) -- Tolérances sur le diamètre extérieur et l'épaisseur de paroi

Polipropilenske (PP) cevi - Tolerance zunanjih premerov in debelin sten

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-1995
• Withdrawal Date: 10-Jan-2012
• ICS: 23.040.20 - Plastics pipes
• Technical Committee: PCV - Plastic pipes, fittings and valves
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 11-Jan-2012
• Due Date: 03-Feb-2012
• Completion Date: 11-Jan-2012
• Ref Project: ISO 3609:1977 - Polypropylene (PP) pipes — Tolerances on outside diameters and wall thicknesses

Relations

• Revised: ISO 11922-2:1997 - Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 2: Inch-based series
• Effective Date: 12-May-2008
• Revised: ISO 11922-1:1997 - Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
• Effective Date: 12-May-2008

Standards Content (Sample)

INTERNATIONAL STANDARD @ 3609
‘a=&
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION *METIIYHAPOIIHAR OPTAHWAUMR no CTAHnAPïM3AUHM .ORGANISATION INTERNATIONALE DE NORMALISATION
Polypropylene (PP) pipes - Tolerances on outside diameters
and wall thicknesses
Tubes en polypropylène (PPl - Tolérances sur le diamètre extérieur et l’épaisseur de paroi
First edition - 1977-12-15
Ref. No. IS0 3609-1977 (E)
UDC 621.643.29 : 678.742.3 : 531.717.1
Dewriptors : piping, pipes (tubes). plastic products, plastic tubes, polypropylene, specifications. dimensional tolerances.
1 page
Price based on

---------------------- Page: 1 ----------------------
FOREWORD
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 member bodies). The work of developing
International Standards is carried out through IS0 technical committees. Every
member body interested in a subject for which a technical Committee has been set
up has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 3609 was developed by Technical Committee
iSO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, and was
circulated to the member bodies in December 1974.
It has been approved by the member bodies of the following countries :
Italy Sweden
Austria
Mexico Switzerland
Belgium
Norway Turkey
Finland
Poland U.S.A.
France
Portugal U .S.S. R .
Germany
Romania Yugoslavia
India
South Africa, Rep. of
Ireland
Israel Spain
The member bodies of the following countries expressed disapproval of the
document on technical grounds :
Netherlands
United Kingdom
Q International Organization for Standardization, 1977 0
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD IS0 3609-1977 (E)
Polypropylene (PP) pipes - Tolerances on outside diameters
and wall thicknesses
1 SCOPE AND FIELD OF APPLICATION side diameter (d,) and the nominal outside diameter (de)
of a pipe as given in IS0 161/1 shall be positive, in the
This International Standard specifies the permissible
form + $, where x is less than or equal to the greater of the
deviations of the outside diameters and the wall thicknesses
of pipes with outside diameters not exceeding 630 mm and
two
...

SLOVENSKI STANDARD
SIST ISO 3609:1995
01-november-1995
Polipropilenske (PP) cevi - Tolerance zunanjih premerov in debelin sten
Polypropylene (PP) pipes -- Tolerances on outside diameters and wall thicknesses
Tubes en polypropylène (PP) -- Tolérances sur le diamètre extérieur et l'épaisseur de
paroi
Ta slovenski standard je istoveten z: ISO 3609:1977
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
SIST ISO 3609:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 3609:1995

---------------------- Page: 2 ----------------------

SIST ISO 3609:1995
INTERNATIONAL STANDARD @ 3609
‘a=&
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION *METIIYHAPOIIHAR OPTAHWAUMR no CTAHnAPïM3AUHM .ORGANISATION INTERNATIONALE DE NORMALISATION
Polypropylene (PP) pipes - Tolerances on outside diameters
and wall thicknesses
Tubes en polypropylène (PPl - Tolérances sur le diamètre extérieur et l’épaisseur de paroi
First edition - 1977-12-15
Ref. No. IS0 3609-1977 (E)
UDC 621.643.29 : 678.742.3 : 531.717.1
Dewriptors : piping, pipes (tubes). plastic products, plastic tubes, polypropylene, specifications. dimensional tolerances.
1 page
Price based on

---------------------- Page: 3 ----------------------

SIST ISO 3609:1995
FOREWORD
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 member bodies). The work of developing
International Standards is carried out through IS0 technical committees. Every
member body interested in a subject for which a technical Committee has been set
up has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 3609 was developed by Technical Committee
iSO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, and was
circulated to the member bodies in December 1974.
It has been approved by the member bodies of the following countries :
Italy Sweden
Austria
Mexico Switzerland
Belgium
Norway Turkey
Finland
Poland U.S.A.
France
Portugal U .S.S. R .
Germany
Romania Yugoslavia
India
South Africa, Rep. of
Ireland
Israel Spain
The member bodies of the following countries expressed disapproval of the
document on technical grounds :
Netherlands
United Kingdom
Q International Organization for Standardization, 1977 0
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 3609:1995
INTERNATIONAL STANDARD IS0 3609-1977 (E)
Polypropylene (PP) pipes - Tolerances on outside diameters
and wall thicknesses
1 SCOPE AND FIELD OF A
...

NORME INTERNATIONALE 3609
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXBYHAPOAHAX OPTAHUSAUUX ii0 CTAHAAPTHSAUAA .ORGANISATION INTERNATIONALE DE NORMALISATION
Tubes en polypropylène (PP) - Tolérances sur le diamètre
extérieur et l'épaisseur de paroi
Polypropylene {PP) pipes - To!erances on outside diameters and wall thicknesses
Première édition - 1977-12-15
CDU 621.643.29 : 678.742.3 : 531.717.1 Réf. no : IS0 3609-1977 (F)
Descripteurs : tuyauterie, tuyau, produit en matière plastique, tube en matière plastique, polypropyléne, spécification, tolérance de
dimension.
Prix basé sur 1 page

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L'ISO (Organisation internationale de normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (comités membres de I'ISO). L'élaboration
des Normes internationales est confiée aux comités techniques de I'ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant, Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I'ISO, participent égaiement aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
le Conseil de I'ISO.
Normes internationales par
La Norme internationale IS03609 a été élaborée par le comité technique
lSO/TC 138, Tubes, raccords et robinetterie en matières plastiques pour le trans-
port des fluides, et a éré soumise aux comités membres en décembre 1974.
Elle a été approuvée par les comités membres des pays suivants :
Afrique du Sud, Hép. d' Irlande Suède
Allemagne Israël Suisse
Autriche Italie Turquie
Belgique Mexique U. R .S.S.
Espagne Norvège U.S.A.
Finlande Pologne Yougoslavie
France Portugal
Inde Roumanie
Les comités membres des pays suivants l'ont désapprouvée pour des raisons
techniques :
Pays-Bas
Royaume-Uni
0 Organisation internationale de normalisation, 1977 O
Imprim6 en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE IS0 3609-1977 (F)
Tubes en polypropylène (PP) - Tolérances sur le diamètre
extérieur et l'épaisseur de paroi
moyen (d,) et le diamètre extérieur nominal (de) d'un
1 OBJET ET DOMAINE D'APPLICATION
tube tel qu'il est spécifié dans l'lS0 161/1 doit être positif,
La présente Norme internationale fixe les écarts admissibles
de la forme +. :, où x est au plus égal a la plus grande des
sur le diamètre extérieur et l'épaisseur de paroi des tubes de
diamètres extérieurs jusqu'à 630 mm, conformes à deux valeurs suivantes
...