SIST EN 301 003-1:2000
(Main)Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 1: Protocol specification [ITU-T Recommendation Q.2963.1 (1996), modified]
Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 1: Protocol specification [ITU-T Recommendation Q.2963.1 (1996), modified]
B-ISDN UNI layer 3 signalling CS2 - step 1 at the UNI
Širokopasovno digitalno omrežje z integriranimi storitvami (B-ISDN) - Protokol digitalne naročniške signalizacije št. 2 (DSS2) - Karakteristike zveze - Modificiranje vrhnje celične hitrosti pri lastniku zveze - 1. del: Specifikacija protokola (preoblikovano priporočilo ITU-T Q.2963.1 (1996))
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 1: Protocol specification [ITU-T Recommendation Q.2963.1 (1996), modified]33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 003-1 V1.1.33SIST EN 301 003-1:en01-december-3SIST EN 301 003-1:SLOVENSKI
STANDARD
SIST EN 301 003-1:2000
EN 301 003-1 V1.1.3 (1999-05)European Standard (Telecommunications series)Broadband Integrated Services Digital Network (B-ISDN);Digital Subscriber Signalling System No. two (DSS2) protocol;Connection characteristics;Peak cell rate modification by the connection owner;Part 1: Protocol specification[ITU-T Recommendation Q.2963.1 (1996), modified]SIST EN 301 003-1:2000
ETSIEN 301 003-1 V1.1.3 (1999-05)2ReferenceDEN/SPS-05083-1 (9ac90ie0.PDF)KeywordsATM, B-ISDN, broadband, DSS2, ISDN, layer 3,protocol, UNIETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: editor@etsi.frCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 301 003-1:2000
ETSIEN 301 003-1 V1.1.3 (1999-05)3Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee SignallingProtocols and Switching (SPS).The present document is part 1 of a multi-part standard covering the Digital Subscriber Signalling System No. two(DSS2) protocol specification for the Broadband Integrated Services Digital Network (B-ISDN) peak cell ratemodification by the connection owner, as described below:Part 1:"Protocol specification [ITU-T Recommendation Q.2963.1 (1996), modified]";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification for the user";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the user";Part 5:"Test Suite Structure and Test Purposes (TSS&TP) specification for the network";Part 6:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network".The present document is the initial standard in a family of standards covering the modification of ATM trafficparameters in B-ISDN connections.National transposition datesDate of adoption of this EN:2 April 1999Date of latest announcement of this EN (doa):31 July 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 January 2000Date of withdrawal of any conflicting National Standard (dow):31 January 2000Endorsement noticeThe elements of ITU-T Recommendation Q.2963.1 (1996) apply, with the following modifications:NOTE:New or modified text is indicated using sidebars. In addition, underlining and/or strike-out are used tohighlight detailed modifications where necessary.SIST EN 301 003-1:2000
ETSIEN 301 003-1 V1.1.3 (1999-05)4Clause 1Replace clause 1 by:1ScopeThis first part of EN 301 003 specifies the signalling protocol for peak cell rate modification for the BroadbandIntegrated Services Digital Network (B-ISDN) at the TB reference point or coincident SB and TB reference point (asdefined in ITU-T Recommendation I.413 [1]) by means of the Digital Subscriber Signalling System No. two (DSS2).In addition, the present document specifies the protocol requirements at the TB reference point where the service isprovided to the user via a private B-ISDN.The capability described in the present document enables the connection owner to modify the peak cell rate forcall/connections that have already been established.Peak cell rate modification is applicable to all connection oriented telecommunication services that are based on singlepoint-to-point calls/connections, however, modification is not applicable to emulated N-ISDN services. The peak cellrate modification for point-to-multipoint calls/connections is outside the scope of the present document.The present document is applicable to equipment, supporting peak cell rate modification, to be attached at either side ofa TB reference point or coincident SB and TB reference point when used as an access to the public B-ISDN.Further parts of the present document provide the method of testing and detailed application specific requirements todetermine conformance to the present document.The provision of this service requires the support of the protocol for the basic point-to-point call/bearer connections asdefined in the EN 300 443-1 [4].Clause 2, first paragraphReplace the first paragraph of clause 2 by:The following documents contain provisions which, through reference in this text, constitute provisions of the presentdocument.· References are either specific (identified by date of publication, edition number, version number, etc.) ornon-specific.· For a specific reference, subsequent revisions do not apply.· For a non-specific reference, the latest version applies.· A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.Clause 2Inser
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 1: Protocol specification [ITU-T Recommendation Q.2963.1 (1996), modified]33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 003-1 Version 1.1.3SIST EN 301 003-1:2000en01-december-2000SIST EN 301 003-1:2000SLOVENSKI
STANDARD
SIST EN 301 003-1:2000
EN 301 003-1 V1.1.3 (1999-05)European Standard (Telecommunications series)Broadband Integrated Services Digital Network (B-ISDN);Digital Subscriber Signalling System No. two (DSS2) protocol;Connection characteristics;Peak cell rate modification by the connection owner;Part 1: Protocol specification[ITU-T Recommendation Q.2963.1 (1996), modified]SIST EN 301 003-1:2000
ETSIEN 301 003-1 V1.1.3 (1999-05)2ReferenceDEN/SPS-05083-1 (9ac90ie0.PDF)KeywordsATM, B-ISDN, broadband, DSS2, ISDN, layer 3,protocol, UNIETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: editor@etsi.frCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 301 003-1:2000
ETSIEN 301 003-1 V1.1.3 (1999-05)3Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee SignallingProtocols and Switching (SPS).The present document is part 1 of a multi-part standard covering the Digital Subscriber Signalling System No. two(DSS2) protocol specification for the Broadband Integrated Services Digital Network (B-ISDN) peak cell ratemodification by the connection owner, as described below:Part 1:"Protocol specification [ITU-T Recommendation Q.2963.1 (1996), modified]";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification for the user";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the user";Part 5:"Test Suite Structure and Test Purposes (TSS&TP) specification for the network";Part 6:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network".The present document is the initial standard in a family of standards covering the modification of ATM trafficparameters in B-ISDN connections.National transposition datesDate of adoption of this EN:2 April 1999Date of latest announcement of this EN (doa):31 July 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 January 2000Date of withdrawal of any conflicting National Standard (dow):31 January 2000Endorsement noticeThe elements of ITU-T Recommendation Q.2963.1 (1996) apply, with the following modifications:NOTE:New or modified text is indicated using sidebars. In addition, underlining and/or strike-out are used tohighlight detailed modifications where necessary.SIST EN 301 003-1:2000
ETSIEN 301 003-1 V1.1.3 (1999-05)4Clause 1Replace clause 1 by:1ScopeThis first part of EN 301 003 specifies the signalling protocol for peak cell rate modification for the BroadbandIntegrated Services Digital Network (B-ISDN) at the TB reference point or coincident SB and TB reference point (asdefined in ITU-T Recommendation I.413 [1]) by means of the Digital Subscriber Signalling System No. two (DSS2).In addition, the present document specifies the protocol requirements at the TB reference point where the service isprovided to the user via a private B-ISDN.The capability described in the present document enables the connection owner to modify the peak cell rate forcall/connections that have already been established.Peak cell rate modification is applicable to all connection oriented telecommunication services that are based on singlepoint-to-point calls/connections, however, modification is not applicable to emulated N-ISDN services. The peak cellrate modification for point-to-multipoint calls/connections is outside the scope of the present document.The present document is applicable to equipment, supporting peak cell rate modification, to be attached at either side ofa TB reference point or coincident SB and TB reference point when used as an access to the public B-ISDN.Further parts of the present document provide the method of testing and detailed application specific requirements todetermine conformance to the present document.The provision of this service requires the support of the protocol for the basic point-to-point call/bearer connections asdefined in the EN 300 443-1 [4].Clause 2, first paragraphReplace the first paragraph of clause 2 by:The following documents contain provisions which, through reference in this text, constitute provisions of the presentdocument.· References are either specific (identified by date of publication, edition number, version number, etc.) ornon-specific.· For a specific reference, subsequent revisions do not apply.· For a non-specific reference, the latest version applies.· A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.Clau
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.