SIST EN 16511:2023/oprA1:2024
(Amendment)Modular mechanical locked floor coverings (MMF) - Specification, requirements and test method for multilayer modular panels for floating installation
Modular mechanical locked floor coverings (MMF) - Specification, requirements and test method for multilayer modular panels for floating installation
This document specifies the characteristics of multilayer mechanical locked floor covering with a wear-resistant and decorative surface layer supplied in panels (either tile or plank form). The floor panels are considered suitable for domestic and commercial levels of use and designed for floating installation.
This document does not apply to resilient floor panels for loose-laying according to EN ISO 20326, to multilayer wood floorings according to EN 13489, to wood veneer floor coverings according to EN 14354, to laminate floor covering according to EN 13329, EN 14978 and EN 15468 nor to products specified in EN ISO 10581, EN ISO 10582, EN ISO 24011, EN 12104 and ISO 14486.
This document is applicable to areas which are subject to frequent wetting, e.g. bathrooms, laundry rooms or saunas, only if specified by the producer.
This document also includes requirements for marking and packaging.
In Annex A (informative), optional properties are given. In Annex B (informative), a test method for the classification of the flexibility is given.
Modulare mechanisch verriegelnde Bodenbeläge (MMF) - Spezifikation, Anforderungen und Prüfverfahren für mehrschichtige modulare Paneele für die schwimmende Verlegung
Revêtements de sol modulaires à verrouillage mécanique (MMF) - Spécifications, exigences et méthodes d'essai pour panneaux multicouches modulaires pour pose flottante
Modularne mehansko spojene talne obloge (MMF) - Specifikacije, zahteve in preskusne metode za večslojne modularne plošče za plavajočo namestitev - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2024
Modularne mehansko spojene talne obloge (MMF) - Specifikacije, zahteve in
preskusne metode za večslojne modularne plošče za plavajočo namestitev
Modular mechanical locked floor coverings (MMF) - Specification, requirements and test
method for multilayer modular panels for floating installation
Modulare mechanisch verriegelnde Bodenbeläge (MMF) - Spezifikation, Anforderungen
und Prüfverfahren für mehrschichtige modulare Paneele für die schwimmende Verlegung
Revêtements de sol modulaires à verrouillage mécanique (MMF) - Spécifications,
exigences et méthodes d'essai pour panneaux multicouches modulaires pour pose
flottante
Ta slovenski standard je istoveten z: EN 16511:2023/prA1
ICS:
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 16511:2023
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2024
ICS 97.150
English Version
Modular mechanical locked floor coverings (MMF) -
Specification, requirements and test method for multilayer
modular panels for floating installation
Revêtements de sol modulaires à verrouillage Modulare mechanisch verriegelnde Bodenbeläge
mécanique (MMF) - Spécifications, exigences et (MMF) - Spezifikation, Anforderungen und
méthodes d'essai pour panneaux multicouches Prüfverfahren für mehrschichtige modulare Paneele
modulaires pour pose flottante für die schwimmende Verlegung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 134.
This draft amendment A1, if approved, will modify the European Standard EN 16511:2023. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16511:2023/prA1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Modification to 5.2, “Classification requirements” . 4
European foreword
This document (EN 16511:2023/prA1:2024) has been prepared by Technical Committee CEN/TC 134
“Resilient, textile, laminate and modu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.