SIST EN 61029-2-9:2013/A11:2014

Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws

This European Standard applies to transportable mitre saws with a saw blade diameter not exceeding 350 mm, intended for cutting wood and analogous materials, plastics and non-ferrous metals except magnesium.

Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-9: Besondere Anforderungen für Gehrungskappsägen

Sécurité des machines-outils électriques semi-fixes - Partie 2-9: Règles particulières pour les scies à onglet

Varnost premičnih električnih orodij - 2-9. del: Posebne zahteve za zajeralne žage - Dopolnilo A11

Ta evropski standard se uporablja za premične zajeralne žage, katerih premer rezila je manjši od 350 mm in so namenjene rezanju lesa in podobnih materialov, plastike ter barvnih kovin, razen magnezija.

General Information

• Status: Withdrawn
• Publication Date: 02-Jan-2014
• Withdrawal Date: 26-Nov-2019
• ICS: 25.080.60 - Sawing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 27-Nov-2019
• Due Date: 20-Dec-2019
• Completion Date: 27-Nov-2019
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 61029-2-9:2012/A11:2013 - Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws

Relations

• Amends: SIST EN 61029-2-9:2013 - Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
• Effective Date: 11-Dec-2012
• Replaced By: SIST EN 62841-3-9:2016 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 61029-2-9:2009 - Safety of transportable motor-operated electric tools -- Part 2-9: Particular requirements for mitre saws
• Effective Date: 01-Feb-2014
• Amends: SIST EN 61029-2-9:2013 - Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
• Effective Date: 29-Jan-2023
• Amends: SIST EN 61029-2-9:2013 - Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61029-2-9:2013/A11:2014
01-februar-2014
9DUQRVWSUHPLþQLKHOHNWULþQLKRURGLMGHO3RVHEQH]DKWHYH]D]DMHUDOQHåDJH
'RSROQLOR$
Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements
for mitre saws
Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-9: Besondere
Anforderungen für Gehrungskappsägen
Sécurité des machines-outils électriques semi-fixes - Partie 2-9: Règles particulières
pour les scies à onglet
Ta slovenski standard je istoveten z: EN 61029-2-9:2012/A11:2013
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 61029-2-9:2013/A11:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61029-2-9:2013/A11:2014

---------------------- Page: 2 ----------------------

SIST EN 61029-2-9:2013/A11:2014

EUROPEAN STANDARD
EN 61029-2-9/A11

NORME EUROPÉENNE
September 2013
EUROPÄISCHE NORM

ICS 25.080.60; 25.140.20


English version


Safety of transportable motor-operated electric tools -
Part 2-9: Particular requirements for mitre saws



Sécurité des machines-outils électriques Sicherheit transportabler motorbetriebener
semi-fixes - Elektrowerkzeuge -
Partie 2-9: Règles particulières pour les Teil 2-9: Besondere Anforderungen für
scies à onglet Gehrungskappsägen





This amendment A11 modifies the European Standard EN 61029-2-9:2012; it was approved by CENELEC on
2013-08-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungar
...