SIST EN 62841-3-9:2016

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws

Standard applies to transportable mitre saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 360 mm, which hereinafter might simply be referred to as saw or tool. This standard does not apply to mitre saws intended to cut other metals, such as magnesium, steel and iron. This standard does not apply to mitre saws with an automatic feeding device.

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen -Sicherheit -Teil 3-9: Besondere Anforderungen für Gehrungskappsägen

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité -- Partie 3-9: Exigences particulières pour les scies à onglets transportables

L'IEC 62841-3-9:2014 s'applique aux scies à onglets transportables destinées à être utilisées avec une lame de scie dentée pour la coupe du bois et de matériaux analogues, de plastiques et de métaux non ferreux à l'exception du magnésium, la lame de scie ayant un diamètre ne dépassant pas 360 mm, celle-ci pouvant être simplement désignée ci-après comme scie ou outil. La présente norme ne s'applique pas aux scies à onglets utilisées pour couper d'autres métaux, tels que le magnésium, l'acier et le fer. La présente norme ne s'applique pas aux scies à onglets équipées d'un appareil d'alimentation automatique. L'attention des Comités Nationaux est attirée sur le fait que les fabricants d'appareils et les organismes d'essai peuvent avoir besoin d'une période transitoire après la publication d'une nouvelle publication CEI, ou d'une publication amendée ou révisée, pour fabriquer des produits conformes aux nouvelles exigences et pour adapter leurs équipements aux nouveaux essais ou aux essais révisés. Le comité recommande que le contenu de cette publication soit entériné au niveau national au plus tôt 36 mois après la date de publication.
Mots-clés: scie à onglet, scie, outil de coupe
Cette publication doit être lue conjointement avec la CEI 62841-1:2014.

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-9. del: Posebne zahteve za prenosne zajeralne žage

Standard se uporablja za prenosne zajeralne žage z nazobčanim rezilom za rezanje lesa in podobnih materialov, plastike in barvnih kovin, razen magnezija, katerih premer rezila je manjši od 360 mm in so v nadaljnjem besedilu poimenovane zgolj žaga ali orodje. Ta standard se ne uporablja za zajeralne žage, namenjene rezanju drugih materialov, kot so magnezij, jeklo in železo. Ta standard se ne uporablja za zajeralne žage s samodejnim podajalnikom.

General Information

• Status: Withdrawn
• Publication Date: 10-Feb-2016
• Withdrawal Date: 09-May-2024
• ICS: 25.080.60 - Sawing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 10-May-2024
• Due Date: 02-Jun-2024
• Completion Date: 10-May-2024
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Ref Project: EN 62841-3-9:2015 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws

Relations

• Replaces: SIST EN 61029-2-9:2013/A11:2014 - Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 61029-2-9:2013 - Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN IEC 62841-3-9:2020 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2020)
• Effective Date: 23-Jun-2020
• Amended By: SIST EN 62841-3-9:2016/A11:2018 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
• Effective Date: 07-Jun-2022
• Corrected By: SIST EN 62841-3-9:2016/AC:2016 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014/COR2:2016)
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62841-3-9:2016
01-marec-2016
1DGRPHãþD
SIST EN 61029-2-9:2013
SIST EN 61029-2-9:2013/A11:2014
(OHNWURPRWRUQDURþQDRURGMDSUHQRVQDRURGMDWHUVWURML]DWUDWRLQYUW9DUQRVW
GHO3RVHEQH]DKWHYH]DSUHQRVQH]DMHUDOQHåDJH
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen -Sicherheit -Teil 3-9: Besondere Anforderungen für
Gehrungskappsägen
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité -- Partie 3-9: Exigences particulières pour les scies à onglets transportables
Ta slovenski standard je istoveten z: EN 62841-3-9:2015
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 62841-3-9:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62841-3-9:2016

---------------------- Page: 2 ----------------------

SIST EN 62841-3-9:2016


EUROPEAN STANDARD EN 62841-3-9

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2015
ICS 25.140.20 Supersedes EN 61029-2-9:2012
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-9: Particular
requirements for transportable mitre saws
(IEC 62841-3-9:2014 , modified + COR1:2015)
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 3-9: Exigences transportable Werkzeuge und Rasen- und
particulières pour les scies à onglets transportables Gartenmaschinen - Sicherheit - Teil 3-9: Besondere
(IEC 62841-3-9:2014 , modifiée + COR1:2015) Anforderungen für Gehrungskappsägen
(IEC 62841-3-9:2014 , modifiziert + COR1:2015)
This European Standard was approved by CENELEC on 2014-07-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62841-3-9:2015 E

---------------------- Page: 3 ----------------------

SIST EN 62841-3-9:2016
EN 62841-3-9:2015 - 2 -
European foreword
The text of document 116/181/FDIS, future edition 1 of IEC 62841-3-9, prepared by IEC/TC 116 "Safety
of motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62841-3-9:2015.
A draft amendment, which covers common modifications to IEC 62841-3-9:2014, was prepared by
CLC/TC 116 “Safety of motor-operated electric tools” and approved by CENELEC.
The following dates are fixed:
(dop) 2016-06-18
• latest date by which this document has to be implemented
at national level by publication of an identical
national standard or by endorsement
• latest date by which the national standards conflicting (dow) 2019-11-15
with this document have to be withdrawn
EN 62841-3-9:2015 supersedes EN 61029-2-9:2012 + A11:2013.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
This European Standard is divided into four parts:
Part 1: General requirements which are common to most electric motor operated tools (for the
purpose of this standard referred to s
...