SIST EN ISO/IEC 7812-2:1998
(Main)Identification cards - Identification of issuers - Part 2: Application and registration procedures (ISO/IEC 7812-2:1993)
Identification cards - Identification of issuers - Part 2: Application and registration procedures (ISO/IEC 7812-2:1993)
Migrated from Progress Sheet (TC Comment) (2000-07-10): Delays in the PTE dept.
Identifikationskarten - Kennzeichnung eines Kartenausgebers - Teil 2: Anwendung und Registrierungsverfahren (ISO/IEC 7812-2:1993)
Cartes d'identification - Identification des émetteurs - Partie 2: Procédures pour les demandes de numéros et pour leur enregistrement (ISO/IEC 7812-2:1993)
Identification cards - Identification of issuers - Part 2: Application and registration procedures (ISO/IEC 7812-2:1993)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO/IEC 7812-2:1998
01-junij-1998
Identification cards - Identification of issuers - Part 2: Application and registration
procedures (ISO/IEC 7812-2:1993)
Identification cards - Identification of issuers - Part 2: Application and registration
procedures (ISO/IEC 7812-2:1993)
Identifikationskarten - Kennzeichnung eines Kartenausgebers - Teil 2: Anwendung und
Registrierungsverfahren (ISO/IEC 7812-2:1993)
Cartes d'identification - Identification des émetteurs - Partie 2: Procédures pour les
demandes de numéros et pour leur enregistrement (ISO/IEC 7812-2:1993)
Ta slovenski standard je istoveten z: EN ISO/IEC 7812-2:1995
ICS:
35.240.15 Identifikacijske kartice in Identification cards and
sorodne naprave related devices
SIST EN ISO/IEC 7812-2:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO/IEC 7812-2:1998
---------------------- Page: 2 ----------------------
SIST EN ISO/IEC 7812-2:1998
---------------------- Page: 3 ----------------------
SIST EN ISO/IEC 7812-2:1998
---------------------- Page: 4 ----------------------
SIST EN ISO/IEC 7812-2:1998
ISO/IEC
INTERNATIONAL
7812-2
STANDARD
Third edition
1993-12-01
Identification cards - Identification of
issuers -
Part 2:
Application and registration procedures
Cartes d’iden tifica tion - /den tifica tion des 6metteurs -
Partie 2: Prochdures pour les demandes de numbros et pour leur
enregistrement
Reference number
ISO/1 EC 7812-2: 1993(E)
---------------------- Page: 5 ----------------------
SIST EN ISO/IEC 7812-2:1998
ISO/IEC 7812-2:1993 (E)
Page
Contents
1
Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Normative references. . . . . . . . . . . . . . . . . . . D . . . . . . . . . . . . . . . . . . . . . . . 1
3
Definitions. . . . . . . . . . . , . . . . “. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
4 Application and registration procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
............. 1
4.1 Application procedure for assignment of a Single IIN.
4.2 Application procedure for approval to become an
................................... 1
authorized blockholder.
................ 2
4.3 Criteria for approval and rejection of applications
5 Appeal process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
........................................... 3
5.1 Appeal bodies.
: . 3
.....................
5.2 Information to be provided
6
Responsibilities of card issuing applicants . . . . . . . . . . . . . . . . . . . . . . . . . . 3
7 Maintenance of blocks . . . . . . . . . . . . . . . . . . . . . . . . . l . . . . . . . . . . . . . . . . . 3
7.1 Responsibilities of authorized blockholders . . . . . . . . . . . . . . . . . . . . . 3
8 Sponsoring Authorities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
.................... 3
8.1 Eligibility to become a Sponsoring Authority
4
..........................................
8.2 Responsibilities.
9 Registration Management Group (RMG). . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
.............................................. 4
Constitution
9.1
.......................................... 4
9.2 Responsibilities.
........................................ 4
9.3 Voting procedures.
10 The register of card issuer identification numbers . . . . . . . . . . . . . . . . . . . . . 5
.................................. 5
10.1 Publication and availability
................................................ 5
10.2 Contents
11 Registration Authority. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
............................................. 5
11.1 Appointment
............................................. 5
11.2 Resignation.
..........................................
11.3 Responsibilities. 5
7
A Application for Issuer Identification Number . . . . . . . . . . . . . . . . . . . . . . . .
8
B Letter of Agreement on Block Assignments. . . . . . . . . . . . . . . . . . . . . . . . .
10
C Guidance for Sponsoring Authorities . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D Sample fully completed application for an issuer identification number . . . 13
E Important Information Regarding Your Number Assignment. . . . . . . . . . . . 14
o ISO/lEC 1993
All rights reserved. Unless otherwise specified, no part of this publication may be reprodubed
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
lSO/IEC Copyright Office l Case Postale 56 l CH-1 Zl 1 Geneve 20 l Switzerland
Printed in Switzerland
ii
---------------------- Page: 6 ----------------------
SIST EN ISO/IEC 7812-2:1998
ISO/IEC 7812-2:1993 (E)
0 ISOIIEC
Foreword
ISO (the International Organization for Standardization) and IEC (the Inter-
national Electrotechnical Commission) form the specialized System for
worldwide standardization. National bodies that are members of ISO or
IEC participate in the development of International Standards through
technical committees established by the respective organization to deal
with particular fields of technical activity. ISO and IEC technical com-
mittees collaborate in fields of mutual interest. Other international organ-
izations, governmental and non-governmental, in liaison with ISO and IEC,
also take part in the work.
In the field of information technology, ISO and IEC have established a joint
technical committee, lSO/IEC JTC 1. Draft International Standards adopted
by the joint technical committee are circulated to national bodies for vot-
ing. Publication as an International Standard requires approval by at least
75 % of the national bodies casting a vote.
International Standard lSO/IEC 7812-2 was prepared by Joint Technical
Committee lSO/IEC JTC 1, Information technology, Subcommittee SC 17,
Identifica tion cards and related devices.
replaces the second edition
This third edition cancels and
(ISO 7812:1987), which has been technically revised.
lSO/IEC 7812 consists of the following Parts, under the general title Iden-
tifica tion cards - Iden tifica tion o f issuers:
- Part 1: Numbering System
- Part 2: Application and registra tion procedures
Annexes A, B, C, D and E of this International Standard are for information
only.
. . .
Ill
---------------------- Page: 7 ----------------------
SIST EN ISO/IEC 7812-2:1998
0 ISOAEC
ISO/IEC 7812-2rl993 (E)
Introduction
This International Standard is one of a series of Standards describing the
Parameters for identification cards and the use of such cards for international
interchange.
iv
---------------------- Page: 8 ----------------------
SIST EN ISO/IEC 7812-2:1998
ISO/IEC 7812-2:1993 (E)
INTERNATIONAL STANDARD @ ‘SO”EC
ldentification cards - Identification of issuers -
Part 2 :
Applicat ion and reaistration
Drocedures
card scheme members must be governed by a set of
1 Scope
operating procedures.
This patt of ISO/IEC 7812 describes the application and
registration procedures for numbers issued in accordance
3.5 Sponsoring Authority: A body authorized by the
with ISOAEC 7812-1.
Sub-Committee responsible for administering an ISO
numbering System, (in this case ISOIIEC JTClBC17) to
ISOAEC 7812-1 specifies the numbering System for the
receive, process and approve applications for IINs submitted
identification of issuers of identification cards used in
in accordance with ISO/IEC 7812.
international interchange.
4 Application and registration procedures
2 Normative references
4.1 A plication procedure for assignment of a
The forlowing Standards contain provisions which, through
P
Single IN
reference in this text, constitute provisions of ISOAEC 7812.
At the time of publication, the editions indicated were valid. All
A card issuer shall apply to its national Standards body, or in
Standards are subject to revision, and Parties to agreements
the absence of a national Standards body, to the secretariat
based on this part of ISOAEC 7812 are encouraged to
of the ISOAEC technical body responsible for this
investigate the possibility of applying the most recent editions
International Standard, for the assignment of an IIN using the
of the Standards listed below. Members of IEC and ISO
form shown in annex A. Application forms are also available,
maintain registers of currently vafid International Standards.
on request from the Registration Authority, the secretariat of
the Registration Management Group (RMG) and the
ISO 3166:1988, Codes for the representation of names of
secretariat of ISOAEC JTCI /SC1 7. The national Standards
coun tries.
body or the secretariat of the ISOAEC JTCWSC17 then acts
as the “Sponsoring Authority” (sec clause 8) with respect to
ISO 7810:1985, Identification cards - Physicai characteristics.
the application.
ISOAEC 7812-1 :1993, Identification cards - Identification of
4.2 Application procedure for approvai to become
issuers - Part 1: Numbering System.
an aut horized blockholder
If the applicant is applying for numbers on behalf of card
3 Definitions
issuers or as a card scheme (see 3.4), it may apply to
For the purposes of this part of ISO/IEC 7812, the definitions
become an authorized blockholder (see 3.2). In this case the
given in ISO 7810, ISO/IEC 7812-1 and the following
applicant shall provide the following supplementaty
definitions apply:
information as justification:
why the proposed blockhoIder’s
3.1 block (of Issuer ldentification Numbers [IINs]): The a) the reason
reservation in the register of card issuer identification
constituents must receive IINs from an authorized
numbers, of a series of two or more IINs for assignment by an blockholder, rather than each applying individually to the
authorized blockholder. Registration Authority for an UN;
b) description of the nature of the Service that the
3.2 blockholder: A business entity representing a group of
applicant’s organization is planning to provide;
card issuers. The blockholder h-as no role in the issuance or
acceptance of identification cards other than to administer the
c) whether the proposed blockholder wiil act as agent for
assignment of IINs to members of its group in accordance
issuers legally associated with it, but each issuer is a
with the procedures established herein and under legal
separate corporate legal entity;
agreement with the Registration Authority.
d) details of future proposed Plans, including the
3.3 card acceptor: Party accepting the identification card
following:
for the purpose of presenting transaction data to an acquirer.
1) estimated number of card issuers by country;
3.4 card scheme: A body representing- a group of card
issuers, one purpose of which is to facilitate the issuance and
2) timing Plans, (i.e. estimated date for allocation of all
acceptance of the cards of that group. To facilitate such
IINs in the proposed block);
acceptance, the card scheme and card issuer shall be visibly
identifiable on the identification card. Interchange among the
---------------------- Page: 9 ----------------------
SIST EN ISO/IEC 7812-2:1998
ISO/IEC 7812-2:1993 (E) 0 ISOIIEC
issuers
whether card acceptors tan access all the card e) the IIN will be usedto identify or differentiate between
e)
in the card scheme, through a si branches or subsidiaries within the applicant’s
ngle acquiring link;
organization (i.e. these branches or subsidiaries are not
separate corporate entities);
f) whether the Service provided to the issuers extends
beyond networking, i.e. communications switching, and if
so in what way? 9 the applicant has requested a specific number or the
reservation in the register of a specific number or made a
commo n aspects of Services off ered card request which is outside the scope of this International
9) the bY
issuers Standard.
within a proposed card scheme.
NOTE 1 Answers to these questions need not be exclusive. NOTE 3 Where special circumstances exist, the Sponsoring Authority
may approve an application for assignment of a specific number and
forward the application to the Registration Authority for assignment of
The RMG may request additional information where further
clarification is needed. the number. AU such requests must be reported by the Sponsoring
Authority to the RMG.
4.3 Criteria for approval and rejection of
mmediate use, e.g. within 12
appl icat ions g) no card will be issued for i
months from the date of issue of an IIN.
4.3.1 Crlterla for approval of an appllcatlon for a
Single IIN 4.3.3 Crlteria for approval as an authorized
blockholder
Applications for a Single IIN shall meet all the criteria for
approval below and shall not comply with any of the criteria Applications to become authorized blockholders shall be
for rejection in 4.3.2. approved only by the RMG, following sponsorship by a
Sponsoring Authority.
The criteria for approval are:
Requests to become an authorized blockholder shall meet all
a) the applicant applying for a Single IIN shall not already
the criteria for approval below and shall not comply with any
have an IIN assigned to it in its own right (outside of any of the criteria for rejection in 4.3.4.
card scheme);
The criteria for approval are:
b) the IIN shall be for immediate
use, preferably within 12
months of t he date of issue of the
IIN; a) the applicant has provided adequate supplementary
information as justification to become an authorized
c) the card being issued shall be for use in an blockholder (see 4.2);
international interchange environment (see ISO/lEC
7812-1); b) the applicant shall request a block size which
accommodates only a Single IIN for each entity that it
d) the applicant s halt
be a Single corporate entity currently represents or may reasonably expect to
operating under a specific legislative regulation.
represent in the future;
NOTE 2 Where cards are for use sdely within the country of issue,
c) the applicant shall agree to sign a legal agreement
card issuers should contact their national Standards body for
with the Registration Authority (See letter of agreement on
information on the availability of a national numbering System (see
block assignments, annex B) and shall accept the
ISO/IEC 7812-1).
responsibilities laid down in the letter of agreement.
4.3.2 Crlteria for rejection of an appllcation for a
4.3.4 Criteria for rejection of an application to
Single IIN
become an authorized blockholder
An application for a Single IIN shall be rejected by the
An application to become an authorized blockholder shall be
Sponsoring Authority or the members of the RMG when any
rejected by the Sponsoring Authority or the members of the
one of the following conditions exist:
RMG where any one of the following conditions exist:
a) the applicant is not a card issuer;
the applicant does not meet the criteria for approval as
a)
an authorized blockholder in 4.3 .3;
b) the applicant has previously been assigned an IIN in
its own right (outside of its membership of any card
b) the applicant has previously been assigned an IIN and
scheme) and is still utilizing it;
has not provided adequate supplementary information as
justification for issue of an additional IIN (See 4.2);
c) the cards issued by the applicant would not be used in
an international interchange environment;
c) the organizations represented by the applicant (i.e. the
card issuers) will not issue cards for use in an international
d) the IIN will be used to identify or differentiate between
interchange environment;
products or Services or solely to facilitate routing, or to
identify geographic location;
d) the organizations represented by the applicant (i.e. the
entify or diff erentiate
card issuers) will use the IINs to id
2
---------------------- Page: 10 ----------------------
SIST EN ISO/IEC 7812-2:1998
0 ISOIIEC lSO/IEC 7812-2:1993 (E)
between products
01 Services, or to identify geographic become an authorized blockholder shall enter into a written
locations;
legal agreement with the Registration Authority (See annex
B). The responsibilities of authorized blockholders shall be:
e) the blockholder will not be in a position to assign any
numbers from the resetved block within 12 months from a) to process applications for IINs from within its area of
the date of issue of t he block of II Ns. responsibility within 30 days of receipt of the application;
b) to approve applications that meet the criteria in 4.3.1;
5 Appeal process
c) to assign sequentially a Single IIN, within 30 days of
5.1 Appeal bodies
receipt of the request, from the resen/ed block to a Single
Where an application has been rejected by a Sponsoring card issuer whose application fulfills the criteria for
Authority the applicant may appeal to the secretariat of the approval in 4.3.1;
RMG (See clause 9). Where an application has been rejected
by the RMG the applicant may appeal to ISO/IEC JTClISCl7
d) to inform its constituents in writing, within 30 days of
through the secretariat of ISO/IEC JTCl/SCl7. Applicants
receipt of the application, as to the disposition of their
may submit for appeal, applications that have been rejected application;
by ISO/IEC JTCl/SCl7, to the ISO Central Secretariat.
e) to inform the Registration Authority in writing, within the
Appeal against rejection of an application shall be lodged with agreed timeframe (See 11.3.3) of each number
the appropriate body within 90 days of the date of the letter of assignment; and to notify the Registration Authority
rejection.
regarding changes to the information as originally
supplied. This information shall be provided either when
such changes arise or monthly by the fifteenth of each
5.2 Information to be provided
month and submitted along with the issuance fee unless
Where an application for either a Single IIN or to become an otherwise stipulated by separate written agreement with
authorized blockholder has been rejected by the Sponsoring the Registration Authority. The Registration Authority shall
Authority, the following information shall be provided by the stipulate the format for supplying the information (See
applicant to the relevant appeal body in support of the appeal:
11.3.3);
a) Statement of which rejection clause (See 4.3.2 or 4.3.4) 9 where an application has been rejected, to inform the
is disputed and why the applicant believes that the
applicant in writing, within 30 days of receipt of the
rejected application fulfills the criteria for approval (See
application, of the rejection and of the appeal process (See
4.3.1 or 4.3.3);
clause 5);
b) Statement of special circumstances whereby a specific g) to verify that the register of card issuer identification
requirement of the rejected application tan be met, but numbers maintained by the Registration Authority (see
such requirement is outside the current procedures and
10.2) contains accurate information regarding IINs issued
criteria for approval outlined in this International Standard. from within its block;
h) to establish and maintain records relative to the
6 Responsibilities of card issuing applicants
request for or assignment of an IIN including notification of
The responsibilities of card issuing applicants shall be:
the assignment to the Registration Authority. Records of
IIN issuance shall be permanently maintained and
a) to comply fully with the numbering System and ,the available for reference by the RMG. Requests for an IIN
procedures for application for IINs as contained in ISO/IEC
that have been denied, shall be maintained for a minimum
7812-1 and ISO/IEC 7812-2;
period of 90 days where no appeal is initiated; or when an
appeal is initiated, until that process is complete. In the
b) to forward to its national Standards body, or in the
event that the blockholde6 organization relinquishes the
absence of a national Standards body, to the secretariat of
management of the block, or the block is terminated by
ISO/IEC JTCl/SCl7, a completed application form, (see
action of the RMG, all records shall be transferred to the
annex A) together with the requisite fee;
Registration Authority.
to retain the completed application form containing the
c) 8 Sponsoring Authorities
IIN
assigned to t he applicant by the Registration Authority;
8.1 Eligibility to become a Sponsoring Authority
d) to issue cards using the 1IN assigned by the
Registration Authority within a reasonable timeframe
The following bodies may act as Sponsoring Authorities in
preferably within 12 months of the date of assignment of
processing applications for IINs:
the IIN.
a) any national member body of ISO (or agent appointed
to act for its national member body);
7 Maintenance of blocks
7.1 Responsibilities of authorized blockholders b)- ISO/IEC JTCI /SC1 7;. and
Applicants meeting the criteria in 4.3.3 and approved to c) any group within ISO/IEC JTCVSCl7 appointed for
3
---------------------- Page: 11 ----------------------
SIST EN ISO/IEC 7812-2:1998
ISO/IEC 7812-2:1993 (E) 0 ISO/IEC
purposes concerning the identification card numbering c) the secretariat of the RMG, appointed by the P
System. members of ISO/IEC JTCl/SC17.
A document entitled ‘Guidance for Sponsoring Authorities’ In addition, each member of ISO/IEC JTCVSC17 is entitled to
(annex C) is available to assist Sponsoring Authorities in nominate one delegate and one alternate to the RMG. The
assessing the eligibility of applications and to assist in the atternate may attend all meetings, but is entitled to vote only
procedures for dealing with applications. This document is in the absence of the principal delegate.
also available from the Registration Authority, the secretariat
of the RMG and the secretariat of ISO/IEC JTCVSC17.
9.2 Responsibilities
The responsibilities of the RMG shali be:
8.2 Responsibilities
The responsibilities of a Sponsoring Authority shall be: a) to enforce the regulations for approving applications to
become authorized blockholders (see 4.3.3) and to ensure
a) to ensure that the application fully camplies with the that applicants whose applications do not fulfill the criteria
numbering System and procedures for application for IINs in 4.3.1 or 4.3.3 are rejected and informed of their right to
in ISO/IEC 7812-1 and ISO/IEC 7812-2; appeal (see clause 5);
b) to process applications to become authorized
b) to process, within 30 days of receipt of the request,
applications for IINs from within their countries or areas of blockholders (within 60 days of receipt of the request)
responsi bi lity ; received from the secretariat of the RMG, which have
been submitted by Sponsoring Authorities. This may be
c) to notify the applicant in writing, within 30 days of done either by postal ballot or at a meeting;
receipt of the application, as to the disposition sf their
applicat ion; c) to provide, on request, guidance and counsel to any
national Standards body on the establishment of a national
d) to forward to the Registration Authority (see 11.3.2)
numbering System (See ISO/IEC 7812-1);
those sponsored requests for Single IINs that shall be used
for the purposes described in this International Standard
d) to provide guidance to Sponsoring Authorities on
and that meet the approval criteria in 4.3.1;
applications which demonstrate special circumstances,
requests for block assignments and requests for specific
e) where special circumstances exist, to approve numbers. This guidance shall be decided by resolution at
applications for assignment of a specific number and a meeting or in writing following a postal ballot;
forward the application to the Registration Authority for
assignment of the number. The Sponsoring Authority shall
e) to approve the report on the tost recovery
report all such requests to the RMG. All other requests of n Authority;
from the Registratio
an unusual nature must be reported to the RMG for
review; 9 to monitor Sponsoring Authorities to ensure that they
comply with the criteria laid down within this International
9 to Sponsor requests for blocks of IINs submitted to the
Standard (see clause 8);
RMG where appropriate supplementary information has
been provided as justification and that justification satisfies
g) to respond to all requests for guidance from the
the criteria for approval to become an authorized
Registration Authority within 60 days of the date of
blockholder (see 4.3.3);
request; to review annually the register of card issuer
identification numbers; to review at each meeting all block
g) to respond to general enquiries covering this
assignments and to report its activities to each meeting of
International Standard. ISO/1 EC JTCI /SC1 7 and as required between meetings;
h) to maintain ISO/IEC 7812-1 and ISO/IEC 7812-2.
9 Registration Management Group (RMG)
9.1 Constitution
9.3 Voting procedures
In Order to effectively manage the numbering System for the Any specific request outside the scope of this International
identification of card issuers, ISO/IEC JTCl/SC17 has
Standard, that has been forwarded to the RMG by a
established a RMG, ISO/IEC JTCl/SC17/WG5, which is
Sponsoring Authority, may be dealt with either by voting at a
delegated to act on its behalf.
meeting or by postal ballot.
The RMG shall be made up of: postal ballot
By approval of a majority of returned votes in a
RMG may authorize:
or by majority voti ng at a meeting, the
a) a representative of the Registration Authority who shall
be a non-voting member of the RMG and shall be
assignment of up to ten consecutive numbers;
9
expected to attend all meetings;
ii) specific unusual requests.
b) the Convener of the RMG, appointed by the P
members (national Standards body with Participant Status)
By unanimous approval of the RMG (with at least five
of ISO/IEC JTClISC17;
members voting), either by postal ballot or by voting at a
4
---------------------- Page: 12 ----------------------
SIST EN ISO/IEC 7812-2:1998
ISOIIEC 781292:1993 (E)
0 ISO/IEC
meeting, the RMG may approve the assignment of more than under legal agreement with ISO in accordance with ISO/IEC
ten consecutive numbers.
JTCl Directives annex H.
Where a postal ballot has failed, it shall be referred to a
11.2 Resignation
meeting. If the RMG cannot resolve the failed ballot at a
meeting the matter shall be referred to ISO/IEC JTCl /SC1 7. If a Registration Authority finds it necessary to resign, six
months’ notice shall be given to the ISO Central Secretariat
Where an application to become an authorized blockholder and the secretariat of ISO/IEC JTClISC17. The secretariat of
has been rejected, the RMG shall notify the applicant in ISO/IEC JTCVSC17 shall notify the RMG and initiate a
writing, within 30 days of the close of the ballot, or where a search for a new Registration Authority. If a new Registration
vote was taken at a meeting, within 30 days of that meeting, Authority cannot be found within six months, the ISO/IEC
that the request has been rejected. The RMG shall state the JTCl/SCl7 secretariat in association with the ISO Central
specific reason(s) for the rejection (See 4.3.4) and advise the Secretariat shall assume the responsibilities of the
applicant of their right to appeal to ISO/IEC JTCVSC17 (See Registration Authority on a temporary basis until a
clause 5). replacement is found.
11.3 Responsibilities
10 The register of card issuer identification
numbers
11.3.1 General
10.1 Publication and availability
The responsibilities of the Registration Authority shall be:
The Registration Authority shall maintain a database of
information taken directly from either the application form or a) to maintain the database of card issuer identification
from the information forwarded from blockholders. All information (See clause 10);
information in the database (whether published or not) is
considered confidential. b) to submit a copy of the ISO register of card issuer
identification numbers annually to the secretariat of
Based on the information contained in this database, the ISO/IEC JTCVSC17 and to the RMG;
Registration Authority shall publish a register of card issuer
identification numbers. The register shall be published in both c) to submit for review to each meeting of the RMG, a
numerical and alphabetical Order. Registration Management Report, a Block Reservation
Report and a List of Block Representative Reports. These
The register of card issuer identification numbers is not a reports shall be sent to the secretariat of the RMG two
publicly available document. lt is available free of Charge to months Prior to a meeting;
the members of the RMG. lt is available at a Charge to card
issuers appearing in the register, authorized blockholders and d) to fotward to the RMG, within 30 days of receipt of the
Sponsoring Authorities only. application, requests for more than one IIN or any
applications where special circumstances exist;
10.2 Contents
e) to retain as a permanent record copies of all
applications submitted to it, along with the disposition of
The register of ca rd issuer identifi cation numbers shall
contain the followi informatio In: each application.
w
a) name of card issuer or blockholder; 11.3.2 Responsibilities to applicants applying for a
Single IIN
b) address as indicated on the application form;
The responsibilities of the Registration Authority to applicants
c) IIN assigned to the card issuer by
the Registratio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.