SIST EN ISO 10765:2010
(Main)Footwear - Test method for the characterization of elastic materials - Tensile performance (ISO 10765:2010)
Footwear - Test method for the characterization of elastic materials - Tensile performance (ISO 10765:2010)
This International Standard specifies a test method for the determination of some typical parameters of elastics for footwear using the strength/elongation graph, which is obtained from the tensile strength test. This method is applicable to any elastic material used for footwear.
Schuhe - Prüfverfahren zur Charakterisierung elastischer Materialien - Gebrauchsverhalten unter Zugbeanspruchung (ISO 10765:2010)
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung einiger typischer Parameter von elastischen Materialien für Schuhe unter Anwendung der Kraft-Dehnungs-Kurve fest, die aus der Zugfestigkeitsprüfung erhalten wurde. Dieses Verfahren gilt für sämtliche Arten von elastischen Materialien, die in Schuhen verwendet werden.
Chaussures - Méthode d'essai de caractérisation des matériaux élastiques - Performances de traction (ISO 10765:2010)
L'ISO 10765:2010 spécifie une méthode d'essai pour la détermination de certains paramètres types des élastiques pour chaussures, à l'aide d'une courbe de force/allongement, obtenue à partir d'un essai de résistance à la traction. Cette méthode est applicable à tout matériau élastique utilisé pour des chaussures.
Obutev - Preskusna metoda za karakterizacijo elastičnih materialov - Lastnosti pri natezni obremenitvi (ISO 10765:2010)
Ta mednarodni standard opredeljuje preskusno metodo za ugotavljanje nekaterih tipičnih parametrov elastičnih materialov za obutev, z uporabo grafa trdnosti/raztezka, ki se pridobi iz preskusa natezne trdnosti. Ta metoda se lahko uporablja za vsak elastični material, ki se uporablja za obutev.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10765:2010
01-oktober-2010
2EXWHY3UHVNXVQDPHWRGD]DNDUDNWHUL]DFLMRHODVWLþQLKPDWHULDORY/DVWQRVWLSUL
QDWH]QLREUHPHQLWYL ,62
Footwear - Test method for the characterization of elastic materials - Tensile
performance (ISO 10765:2010)
Schuhe - Prüfverfahren zur Charakterisierung elastischer Materialien -
Gebrauchsverhalten unter Zugbeanspruchung (ISO 10765:2010)
Chaussures - Méthode d'essai de caractérisation des matériaux élastiques -
Performances de traction (ISO 10765:2010)
Ta slovenski standard je istoveten z: EN ISO 10765:2010
ICS:
61.060 Obuvala Footwear
SIST EN ISO 10765:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10765:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 10765:2010
EUROPEAN STANDARD
EN ISO 10765
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2010
ICS 61.060
English Version
Footwear - Test method for the characterization of elastic
materials - Tensile performance (ISO 10765:2010)
Chaussures - Méthode d'essai de caractérisation des Schuhe - Prüfverfahren zur Charakterisierung elastischer
matériaux élastiques - Performances de traction (ISO Materialien - Gebrauchsverhalten unter Zugbeanspruchung
10765:2010) (ISO 10765:2010)
This European Standard was approved by CEN on 9 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10765:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10765:2010
EN ISO 10765:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10765:2010
EN ISO 10765:2010 (E)
Foreword
This document (EN ISO 10765:2010) has been prepared by Technical Committee CEN/TC 309 “Footwear”,
the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 "Footwear".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at
the latest by January 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10765:2010
---------------------- Page: 6 ----------------------
SIST EN ISO 10765:2010
INTERNATIONAL ISO
STANDARD 10765
First edition
2010-07-01
Footwear — Test method for the
characterization of elastic materials —
Tensile performance
Chaussures — Méthode d'essai de caractérisation des matériaux
élastiques — Performances de traction
Reference number
ISO 10765:2010(E)
©
ISO 2010
---------------------- Page: 7 ----------------------
SIST EN ISO 10765:2010
ISO 10765:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10765:2010
ISO 10765:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10765 was prepared by Technical Committee ISO/TC 216, Footwear and by Technical Committee
CEN/TC 309, Footwear in collaboration, in accordance with the Vienna Agreement.
© ISO 2010 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 10765:2010
---------------------- Page: 10 ----------------------
SIST EN ISO 10765:2010
INTERNATIONAL STANDARD ISO 10765:2010(E)
Footwear — Test method for the characterization of elastic
materials — Tensile performance
1 Scope
This International Standard specifies a test method for the determination of some typical parameters of
elastics for footwear using the strength/elongation graph, which is obtained from the tensile strength test. This
method is applicable to any elastic material used for footwear.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 18454, Footwear — Standard atmospheres for conditioning and testing of footwear and components for
footwear
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
elastic
tape, cord or fabric containing rubber or a similar substance allowing it to stretch and return to its original
shape
NOTE Generally elastic materials are used in upper construction in the quarters or in the straps to hold the shoe on
the foot.
3.2
elastic gradient
slope of the straight part o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.