SIST EN ISO 8536-3:2000
(Main)Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:1999)
Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:1999)
Migrated from Progress Sheet (TC Comment) (2000-07-10): TC letter of 98-04-07 to GDJ:held static bec. overlap between CEN & EPC (TA/9804 ++ 10)
Infusionsgeräte zur medizinischen Verwendung - Teil 3: Aluminium-Bördelkappen für Infusionsflaschen (ISO 8536-3:1999)
Diese Internationale Norm legt Aluminium-Bördelkappen für Infusionsflaschen aus Glas, wie in ISO 8536-1 beschrieben, fest.
Matériel de perfusion a usage médical - Partie 3: Capsules en aluminium pour flacons de perfusion (ISO 8536-3:1999)
Infuzijska oprema za uporabo v medicini - 3. del: Aluminijeve zaporke za infuzijske steklenice (ISO 8536-3:1999)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8536-3:2000
01-januar-2000
Infuzijska oprema za uporabo v medicini - 3. del: Aluminijeve zaporke za infuzijske
steklenice (ISO 8536-3:1999)
Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO
8536-3:1999)
Infusionsgeräte zur medizinischen Verwendung - Teil 3: Aluminium-Bördelkappen für
Infusionsflaschen (ISO 8536-3:1999)
Matériel de perfusion a usage médical - Partie 3: Capsules en aluminium pour flacons de
perfusion (ISO 8536-3:1999)
Ta slovenski standard je istoveten z: EN ISO 8536-3:1999
ICS:
11.040.20 Transfuzijska, infuzijska in Transfusion, infusion and
injekcijska oprema injection equipment
SIST EN ISO 8536-3:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8536-3:2000
---------------------- Page: 2 ----------------------
SIST EN ISO 8536-3:2000
---------------------- Page: 3 ----------------------
SIST EN ISO 8536-3:2000
---------------------- Page: 4 ----------------------
SIST EN ISO 8536-3:2000
INTERNATIONAL ISO
STANDARD 8536-3
Second edition
1999-09-01
Infusion equipment for medical use —
Part 3:
Aluminium caps for infusion bottles
Matériel de perfusion à usage médical
Partie 3: Capsules en aluminium pour flacons de perfusion
A
Reference number
ISO 8536-3:1999(E)
---------------------- Page: 5 ----------------------
SIST EN ISO 8536-3:2000
ISO 8536-3:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 8536 may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Transfusion, infusion and
International Standard ISO 8536-3 was prepared by Technical Committee ISO/TC 76,
injection equipment for medical and pharmaceutical use.
This second edition cancels and replaces the first edition (ISO 8536-3:1992), which has been technically revised.
Infusion equipment for medical use
ISO 8536 consists of the following parts, under the general title :
— Part 1: Infusion glass bottles
— Part 2: Closures for infusion bottles
— Part 3: Aluminium caps for infusion bottles
— Part 4: Infusion sets for single use, gravity feed
— Part 5: Burette-type infusion sets
— Part 6: Freeze-drying closures for infusion bottles
— Part 7: Caps made of aluminium-plastics combinations for infusion bottles
© ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii
---------------------- Page: 6 ----------------------
SIST EN ISO 8536-3:2000
©
ISO
ISO 8536-3:1999(E)
Introduction
The materials from which infusion glass bottles (including elastomeric closures) are made are suitable primary
packaging materials for storing infusion solutions until they are administered. However, in this part of ISO 8536,
aluminium caps are not considered as primary packaging material in direct contact with the infusion solution.
iii
---------------------- Page: 7 ----------------------
SIST EN ISO 8536-3:2000
---------------------- Page: 8 ----------------------
SIST EN ISO 8536-3:2000
INTERNATIONAL STANDARD © ISO ISO 8536-3:1999(E)
Infusion equipment for medical use —
Part 3:
Aluminium caps for infusion bottles
1 Scope
This part of ISO 8536 specifies aluminium caps for infusion glass bottles which are in accordance with ISO 8536-1.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this part of ISO 8536. For dated references, subsequent amendments to, or revisions of, any of these publications
do not apply. However, parties to agreements based
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.