SIST ETS 300 267-3:1998
(Main)Integrated Services Digital Network (ISDN); Telephony 7 kHz and videotelephony teleservices; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Integrated Services Digital Network (ISDN); Telephony 7 kHz and videotelephony teleservices; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
;
Digitalno omrežje z integriranimi storitvami (ISDN) - Daljinski storitvi: telefonija 7 kHz in videotelefonija - Protokol digitalne naročniške signalizacije št. 1 (DSS1) - 3. del: Zgradba preskušalnega niza in namen preskušanja (TSS&TP) - Specifikacija za uporabnika
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SHFLILNDFLMDIntegrated Services Digital Network (ISDN); Telephony 7 kHz and videotelephony teleservices; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:ETS 300 267-3 E13SIST ETS 300 267-3:1998en01-DSULO-19983SIST ETS 300 267-3:1998SLOVENSKI
STANDARD
SIST ETS 300 267-3:1998
EUROPEANETS 300 267-3TELECOMMUNICATIONMay 1997STANDARDSource: ETSI TC-SPSReference: DE/SPS-05048-3ICS:33.020Key words:ISDN, DSS1, teleservice, 7 kHz, video, telephony, testing, TSS&TP, userIntegrated Services Digital Network (ISDN);Telephony 7 kHz and videotelephony teleservices;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for the userETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1997. All rights reserved.SIST ETS 300 267-3:1998
Page 2ETS 300 267-3: May 1997Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 267-3:1998
Page 3ETS 300 267-3: May 1997ContentsForeword.7Introduction.71Scope.92Normative references.93Definitions and abbreviations.103.1Definitions.103.2Abbreviations.124Test Suite Structure (TSS).124.1First test group level.124.2Second test group level.124.3Third test group level.124.4Fourth test group level.124.5Fifth test group level.134.6Sixth test group level.145Test purposes for generic requirements, telephony 7 kHz and videotelephony teleservices.145.1Test purpose format.145.2Calling user interface.155.2.1Valid behaviour.155.2.1.1Generic requirements.155.2.1.1.1Fallback allowed.155.2.1.1.1.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.155.2.1.1.1.2User requirements at the coincident Sand T reference point.165.2.1.1.2Fallback not allowed.185.2.1.1.2.1User requirements at the coincident Sand T reference point.185.2.1.1.2.2User requirements for interworkingwith private ISDNs.205.2.1.1.3Connection management.205.2.1.1.3.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.205.2.1.1.3.2User requirements at the coincident Sand T reference point.215.2.1.2Telephony 7 kHz teleservice.215.2.1.2.1Fallback allowed.215.2.1.2.1.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.215.2.1.2.1.2User requirements at the coincident Sand T reference point.235.2.1.2.2Fallback not allowed.265.2.1.2.2.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.265.2.1.2.2.2User requirements at the coincident Sand T reference point.26SIST ETS 300 267-3:1998
Page 4ETS 300 267-3: May 19975.2.1.2.3Connection management.275.2.1.2.3.1User requirements at the coincident Sand T reference point.275.2.1.3Videotelephony teleservice.285.2.1.3.1Fallback allowed.285.2.1.3.1.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.285.2.1.3.1.2User requirements at the coincident Sand T reference point.305.2.1.3.2Fallback not allowed.345.2.1.3.2.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.345.2.1.3.2.2User requirements at the coincident Sand T reference point.345.2.1.3.3Connection management.355.2.1.3.3.1User requirements at the coincident Sand T reference point.355.2.1.3.3.2User requirements for interworkingwith private ISDNs.375.2.2Invalid behaviour.375.2.2.1Generic requirements.375.2.2.1.1Fallback allowed.375.2.2.1.1.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.375.2.2.1.1.2User requirements at the coincident Sand T reference point.385.2.2.2Telephony 7 kHz teleservice.405.2.2.2.1Fallback allowed.405.2.2.2.1.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.405.2.2.2.1.2User requirements at the coincident Sand T reference point.405.2.2.3Videotelephony teleservice.425.2.2.3.1Fallback allowed.425.2.2.3.1.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.425.2.2.3.1.2User requirements at the coincident Sand T reference point.435.3Called user interface.455.3.1Valid behaviour.455.3.1.1Generic requirements.455.3.1.1.1Fallback allowed.455.3.1.1.1.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.455.3.1.1.1.2User requirements at the coincident Sand T reference point.475.3.1.1.1.3User requirements for interworkingwith private ISDNs.475.3.1.1.2Fallback not allowed.485.3.1.1.2.1User requirements at the coincident Sand T reference point.485.3.1.1.2.2User requirements for interworkingwith private ISDNs.48SIST ETS 300 267-3:1998
Page 5ETS 300 267-3: May 19975.3.1.2Telephony 7 kHz teleservice.485.3.1.2.1Fallback allowed.485.3.1.2.1.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.485.3.1.2.1.2User requirements at the coincident Sand T reference point.495.3.1.2.1.3User requirements for interworkingwith private ISDNs.505.3.1.2.2Fallback not allowed.505.3.1.2.2.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.505.3.1.2.2.2User requirements at the coincident Sand T reference point.505.3.1.2.3Connection management.515.3.1.2.3.1User requirements at the coincident Sand T reference point.515.3.1.3Videotelephony teleservice.515.3.1.3.1Fallback allowed.515.3.1.3.1.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.515.3.1.3.1.2User requirements at the coincident Sand T reference point.525.3.1.3.1.3User requirements for interworkingwith private ISDNs.535.3.1.3.2Fallback not allowed.545.3.1.3.2.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.545.3.1.3.2.2User requirements at the coincident Sand T reference point.545.3.1.3.3Connection management.555.3.1.3.3.1User requirements at the coincident Sand T reference point.555.3.2Invalid behaviour.565.3.2.1Generic requirements.565.3.2.1.1Fallback allowed.565.3.2.1.1.1User requirements at the coincident Sand T reference point.565.3.3Inopportune behaviour.575.3.3.1Generic requirements.575.3.3.1.1Connection management.575.3.3.1.1.1User requirements at the coincident Sand T reference point or forinterworking with private ISDNs.576Combined test purposes for telephony 7 kHz and videotelephony teleservices.586.1Combined test purpose format.586.2Calling user interface.596.2.1Valid behaviour.596.2.1.1Telephony 7 kHz teleservice.596.2.1.1.1Fallback allowed.596.2.1.1.2Fallback not allowed.626.2.1.1.3Connection management.636.2.1.2Videotelephony teleservice.636.2.1.2.1Fallback allowed.636.2.1.2.2Fallback not allowed.676.2.1.2.3Connection management.686.2.2Invalid behaviour.716.2.2.1Telephony 7 kHz teleservice.716.2.2.1.1Fallback allowed.71SIST ETS 300 267-3:1998
Page 6ETS 300 267-3: May 19976.2.2.2Videotelephony teleservice.726.2.2.2.1Fallback allowed.726.3Called user interface.746.3.1Valid behaviour.746.3.1.1Telephony 7 kHz teleservice.746.3.1.1.1Fallback allowed.746.3.1.1.2Fallback not allowed.756.3.1.2Videotelephony teleservice.766.3.1.2.1Fallback allowed.766.3.1.2.2Fallback not allowed.796.3.1.2.3Connection management.797Compliance.79Annex A (informative):Cross reference: Generic, telephony 7 kHz and videotelephony teleservicestest purposes.81A.1Generic test purposes to telephony 7 kHz and videotelephony teleservices test purposes.81A.2Telephony 7 kHz to videotelephony teleservices test purposes.83History.85SIST ETS 300 267-3:1998
Page 7ETS 300 267-3: May 1997ForewordThis European Telecommunication Standard (ETS) has been produced by the Signalling Protocols andSwitching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).This ETS is part 3 of a multi-part standard covering the Digital Subscriber Signalling System No. one(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) telephony 7 kHz andvideotelephony teleservices, as described below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification for the user";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the user";Part 5:"TSS&TP specification for the network";Part 6:"ATS and partial PIXIT proforma specification for the network".Transposition datesDate of adoption:23 May 1997Date of latest announcement of this ETS (doa):31 August 1997Date of latest publication of new National Standardor endorsement of this ETS (dop/e):28 February 1998Date of withdrawal of any conflicting National Standard (dow):28 February 1998IntroductionThis ETS is divided into seven clauses. Clauses 1 to 3 form the scope, references and abbreviations.Clause 4 contains the test suite structure. Clause 5 contains the complete list of test purposes. Clause 6contains the list of combined test purposes, i.e. test purposes which can be tested together in one testcase. Clause 7 contains the requirements for a generic or abstract test suite to comply with this ETS.It is been assumed that the Implementation Under Test (IUT) already complies with the conformancerequirements associated with the ISDN basic call as defined in ETS 300 102-1. This is specified as arequirement in ETS 300 267-2, clause 5. ETS 300 267-1, subclause 5.1, states that the additional genericrequirements of clause 5 are defined to be compatible with the existing requirements of ETS 300 102-1.The following approach is adopted with regard to specifying test purposes:-resultant states of the IUT are not checked following receipt of messages which comply withETS 300 102-1. Resultant states of the IUT are checked following receipt of messages which donot comply with ETS 300 102-1, e.g. a CONNECT message which contains a Bearer capabilityinformation element;-for ETS 300 267-1, clause 5, the use of the word "assumes", in the case of an IUT at the originatinginterface, is interpreted as meaning that the IUT checks in-band: such test purposes are applicable,therefore, only to IUTs which contain in-band entities.In cases where ETS 300 267-1 specifies that requirements in ETS 300 102-1 shall apply, it is assumedthat, because the IUT already complies with ETS 300 102-1, it also complies with these requirements.However, when specifying the abstract test cases, including test case selection, the requirements inETS 300 102-1 need to be taken into account.SIST ETS 300 267-3:1998
Page 8ETS 300 267-3: May 1997Blank pageSIST ETS 300 267-3:1998
Page 9ETS 300 267-3: May 19971ScopeThis third part of ETS 300 267 is applicable to the stage three of the telephony 7 kHz and videotelephonyteleservices for the pan-European Integrated Services Digital Network (ISDN) as provided by Europeanpublic telecommunications operators at the T reference point or coincident S and T reference point (asspecified in ITU-T Recommendation I.411 [11] by means of the Digital Subscriber Signalling SystemNo. one (DSS1) protocol. ETS 300 267-1 [5] provides the protocol specification and ETS 300 267-2 [6] theProtocol Implementation Conformance Statement (PICS) proforma specification. Stage three identifies theprotocol procedures and switching functions needed to support a telecommunications service (see CCITTRecommendation I.130 [10]).This ETS provides the Test Suite Structure and Test Purposes (TSS&TP) for the user side. It covers theprotocol requirements as defined in ETS 300 267-1 [5] and provides test purposes for the additionalgeneric requirements for basic telecommunication services not defined in ETS 300 102-1 [2](ETS 300 267-1 [5], clause 5), for the telephony 7 kHz teleservice (ETS 300 267-1 [5], clause 6) and forthe videotelephony teleservice (ETS 300 267-1 [5], clause 7).Two types of implementations are covered:-an implementation which supports user requirements at the coincident S and T reference point;-an implementation which supports user requirements for interworking with private ISDNs at theT reference point.2Normative referencesThis ETS incorporates by dated or undated references, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies.[1]ETS 300 082 (1992): "Integrated Services Digital Network (ISDN); 3,1 kHztelephony teleservice; End-to-end compatibility requirements for telephonyterminals".[2]ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-networkinterface layer 3; Specifications for basic call control".[3]ETS 300 144: "Integrated Services Digital Network (ISDN); Audiovisual services;Frame structure for a 64 kbit/s to 1 920 kbit/s channel and associated syntax forinband signalling" (equivalent to ITU-T Recommendation H.221).[4]ETS 300 145: "Integrated Services Digital Network (ISDN); Audiovisual services;Videotelephone systems and terminal equipment operating on one or two64 kbit/s channels".[5]ETS 300 267-1 (1994) including A1 (1996): "Integrated Services Digital Network(ISDN); Telephony 7 kHz and videotelephony teleservices; Digital SubscriberSignalling System No. one (DSS1) protocol; Part 1: Protocol specification".[6]ETS 300 267-2 (1996): "Integrated Services Digital Network (ISDN); Telephony7 kHz and videotelephony teleservices; Digital Subscriber Signalling System No.one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement(PICS) proforma specification".[7]I-ETS 300 281: "Integrated Services Digital Network (ISDN); Telephony 7 kHzteleservice; Terminal requirements necessary for end-to-end compatibility".SIST ETS 300 267-3:1998
Page 10ETS 300 267-3: May 1997[8]I-ETS 300 314: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1); Protocol Implementation ConformanceStatement (PICS) proforma specification for signalling network layer protocol forcircuit-mode basic call control (basic access, user)".[9]CCITT Recommendation G.711 (1988): "Pulse code modulation (PCM) of voicefrequencies".[10]CCITT Recommendation I.130 (1988): "Method for the characterization oftelecommunication services supported by an ISDN and network capabilities ofan ISDN".[11]ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces -Reference configurations".[12]ISO/IEC 9646-2: "Information technology - Open systems interconnection -Conformance testing methodology and framework - Part 2: Abstract test suitespecification".[13]ISO/IEC 9646-3: "Information technology - Open systems interconnection -Conformance testing methodology and framework - Part 3: The Tree andTabular Combined Notation".3Definitions and abbreviations3.1DefinitionsFor the purposes of this ETS, the definitions in ETS 300 267-1 [5] apply in addition to the followingdefinitions:BC1: The first (lower priority) Bearer capability information element included in a SETUP messageallowing bearer capability selection.BC2: The second (higher priority) Bearer capability information element included in a SETUP messageallowing bearer capability selection.BC=speech: A Bearer capability information element with its information transfer capability field set to"speech" and its user information layer one protocol field set to "G.711 A-law".BC=UDI/TA: A Bearer capability information element with its information transfer capability field set to"UDI/TA" and its user information layer one protocol field set to "Recommendations H.221 and H.242".BC=UDI: A Bearer capability information element with its information transfer capability field set to "UDI"and its user information layer one protocol field set to "Recommendations H.221 and H.242".bit-rate allocation signal: Bit position within the frame structure to transmit commands, control andindication signals, capabilities.HLC1: The first (lower priority) High layer compatibility information element in a SETUP message allowinghigh layer compatibility selection.HLC2: The second (higher priority) High layer compatibility information element in a SETUP messageallowing high layer compatibility selection.HLC=telephony: A High layer compatibility information element with its high layer characteristicsidentification field set to "telephony".HLC=videotelephony_ic: A High layer compatibility information element with its high layer characteristicsidentification field set to "110 0000 - videotelephony (Recommendation F.721)" and its extendedaudiovisual characteristics identification field set to "000 0001 - capability set of initial channel ofRecommendation H.221".SIST ETS 300 267-3:1998
Page 11ETS 300 267-3: May 1997HLC=videotelephony_nex: A High layer compatibility information element with its high layercharacteristics identification field set to "110 0000 - videotelephony (Recommendation F.721)" but notcontaining an extended audiovisual characteristics identification field.HLC=videotelephony_sc: A High layer compatibility information element with its high layercharacteristics identification field set to "110 0000 - videotelephony (Recommendation F.721)" and itsextended audiovisual characteristics identification field set to "000 0010 - capability set of subsequentchannel of Recommendation H.221".Implementation Under Test (IUT): The component of the system under test (user terminal or privateISDN) providing the protocol specified in ETS 300 267-1 [5] at the S/T or T reference point.in-band signalling: Signalling via the bit-rate allocation signal of the frame structure, as defined inETS 300 144 [3].mode 0F: Transmission mode in which the initial channel contains framing, and 7-bit G.711 audio signalis being transmitted.mode 0U: Transmission mode in which the initial channel does not contain framing, and 8-bit G.711 audiosignal is being transmitted.PI=#1: A Progress indicator information element, with its progress description field set to #1 "Call is notend-to-end ISDN".PI=#2: A Progress indicator information element, with its progress description field set to #2 "Destinationaddress is non-ISDN".PI=#3: A Progress indicator information element, with its progress description field set to #3 "Originationaddress is non-ISDN".PI=#4: A Progress indicator information element, with its progress description field set to #4 "Call hasreturned to the ISDN".PI=#5: A Progress indicator information element, with its progress description field set to #5 "interworkinghas occurred and has resulted in a telecommunications service change".PI=#8: A Progress indicator information element, with its progress description field set to #8 "In-bandinformation or appropriate pattern now available".telephony 7 kHz fallback allowed SETUP message: A SETUP message containing two BCs, with thefirst BC=speech and the second BC=UDI/TA, a HLC=telephony, and not containing a LLC.telephony 7 kHz fallback not allowed SETUP message: A SETUP message containing a singleBC=UDI/TA and a single HLC=telephony, and not containing a LLC.videotelephony fallback allowed SETUP message: A SETUP message containing two BCs, with thefirst BC=speech and the second BC=UDI/TA, and two HLCs, with the first HLC=telephony and the secondHLC=videotelephony_ic, and not containing a LLC.videotelephony fallback not allowed SETUP message: A SETUP message containing a singleBC=UDI/TA and a single HLC=videotelephony_ic, and not containing a LLC.videotelephony SETUP message for CR2 : A SETUP message containing a single BC=UDI and asingle HLC=videotelephony_sc. The SETUP message is used to establish the second connection in avideotelephony call requiring two connections.SIST ETS 300 267-3:1998
Page 12ETS 300 267-3: May 19973.2AbbreviationsFor the purposes of this ETS, the following abbreviations apply:ATSAbstract Test SuiteBCBearer Capability information elementCR1Call Reference for the first callCR2Call Reference for the second callCR3Call Reference for the third callHLCHigh Layer Compatibility information elementIUTImplementation Under TestLLCLow Layer Compatibility information elementPIProgress Indicator information elementTPTest PurposeTSSTest Suite StructureUDIUnrestricted Digital InformationUDI/TAUnrestricted Digital Information with Tones/AnnouncementsFor TSS specific abbreviations, see clause 4.4Test Suite Structure (TSS)The test suite is structured as a tree. Six test group levels are defined. The TSS is depicted in figure 1.4.1First test group levelThe first test group level contains the name of the test suite:UT7VUser side telephony 7 kHz, videotelephony teleservices and generic protocol.4.2Second test group levelThe second test group level indicates whether the IUT is the calling or the called terminal:ORIGCalling User Interface;DESTCalled User Interface.4.3Third test group levelThe third test group level indicates whether the test purpose covers a requirement applicable to validbehaviour, to invalid behaviour or to inopportune behaviour:BVValid behaviour test purpose;BIInvalid Behaviour test purpose;BOinOpportune Behaviour test purpose.4.4Fourth test group levelThe fourth test group level indicates whether the test purpose covers a requirement applicable to thegeneric protocol, the telephony 7 kHz protocol, or the videotelephony teleservice protocol:GENGeneric requirements. The test purpose covers a requirement applicable for thegeneric part of ETS 300 267-1 [5] (clause 5);TL7Telephony 7 kHz teleservice. The test purpose covers a requirement applicable for thetelephony 7 kHz part of ETS 300 267-1 [5] (clause 6);VTLVideotelephony teleservice. The test purpose covers a requirement applicable for thevideotelephony part of ETS 300 267-1 [5] (clause 7).The group for generic requirements does not appear in the TSS of the combined test purposes. None ofthe generic test purposes can be considered as testable.SIST ETS 300 267-3:1998
Page 13ETS 300 267-3: May 19974.5Fifth test group levelThe fifth test group level indicates which kind of functionality is tested and, more precisely, whether thetest purposes cover requirements applicable to fallback allowed, fallback not allowed or connectionmanagement. Three groups are defined:FBAFallBack Allowed: this group covers all tests where a fallback allowed SETUPmessage is sent to the IUT;FBNFallBack Not allowed: this group covers all tests where a fallback not allowed SETUPmessage is sent to the IUT;CMNConnection MaNagement: this group includes all other cases which do not test theresponse to or the sending of a fallback allowed or a fallback no
...
SLOVENSKI STANDARD
SIST ETS 300 267-3:1998
01-december-1998
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL ,6'1 'DOMLQVNLVWRULWYL WHOHIRQLMD
N+]LQYLGHRWHOHIRQLMD3URWRNROGLJLWDOQHQDURþQLãNHVLJQDOL]DFLMHãW '66
GHO =JUDGEDSUHVNXãDOQHJDQL]DLQQDPHQSUHVNXãDQMD 766 73 6SHFLILNDFLMD
]DXSRUDEQLND
Integrated Services Digital Network (ISDN); Telephony 7 kHz and videotelephony
teleservices; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test
Suite Structure and Test Purposes (TSS&TP) specification for the user
Ta slovenski standard je istoveten z: ETS 300 267-3 Edition 1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST ETS 300 267-3:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ETS 300 267-3:1998
---------------------- Page: 2 ----------------------
SIST ETS 300 267-3:1998
EUROPEAN ETS 300 267-3
TELECOMMUNICATION May 1997
STANDARD
Source: ETSI TC-SPS Reference: DE/SPS-05048-3
ICS: 33.020
Key words: ISDN, DSS1, teleservice, 7 kHz, video, telephony, testing, TSS&TP, user
Integrated Services Digital Network (ISDN);
Telephony 7 kHz and videotelephony teleservices;
Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 3: Test Suite Structure and Test Purposes (TSS&TP)
specification for the user
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.
---------------------- Page: 3 ----------------------
SIST ETS 300 267-3:1998
Page 2
ETS 300 267-3: May 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.
---------------------- Page: 4 ----------------------
SIST ETS 300 267-3:1998
Page 3
ETS 300 267-3: May 1997
Contents
Foreword .7
Introduction.7
1 Scope .9
2 Normative references.9
3 Definitions and abbreviations .10
3.1 Definitions .10
3.2 Abbreviations .12
4 Test Suite Structure (TSS) .12
4.1 First test group level.12
4.2 Second test group level .12
4.3 Third test group level .12
4.4 Fourth test group level .12
4.5 Fifth test group level.13
4.6 Sixth test group level.14
5 Test purposes for generic requirements, telephony 7 kHz and videotelephony teleservices .14
5.1 Test purpose format.14
5.2 Calling user interface .15
5.2.1 Valid behaviour.15
5.2.1.1 Generic requirements.15
5.2.1.1.1 Fallback allowed .15
5.2.1.1.1.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs.15
5.2.1.1.1.2 User requirements at the coincident S
and T reference point.16
5.2.1.1.2 Fallback not allowed .18
5.2.1.1.2.1 User requirements at the coincident S
and T reference point.18
5.2.1.1.2.2 User requirements for interworking
with private ISDNs .20
5.2.1.1.3 Connection management.20
5.2.1.1.3.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs.20
5.2.1.1.3.2 User requirements at the coincident S
and T reference point.21
5.2.1.2 Telephony 7 kHz teleservice.21
5.2.1.2.1 Fallback allowed .21
5.2.1.2.1.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs.21
5.2.1.2.1.2 User requirements at the coincident S
and T reference point.23
5.2.1.2.2 Fallback not allowed .26
5.2.1.2.2.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs.26
5.2.1.2.2.2 User requirements at the coincident S
and T reference point.26
---------------------- Page: 5 ----------------------
SIST ETS 300 267-3:1998
Page 4
ETS 300 267-3: May 1997
5.2.1.2.3 Connection management. 27
5.2.1.2.3.1 User requirements at the coincident S
and T reference point. 27
5.2.1.3 Videotelephony teleservice . 28
5.2.1.3.1 Fallback allowed. 28
5.2.1.3.1.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs . 28
5.2.1.3.1.2 User requirements at the coincident S
and T reference point. 30
5.2.1.3.2 Fallback not allowed. 34
5.2.1.3.2.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs . 34
5.2.1.3.2.2 User requirements at the coincident S
and T reference point. 34
5.2.1.3.3 Connection management. 35
5.2.1.3.3.1 User requirements at the coincident S
and T reference point. 35
5.2.1.3.3.2 User requirements for interworking
with private ISDNs. 37
5.2.2 Invalid behaviour. 37
5.2.2.1 Generic requirements . 37
5.2.2.1.1 Fallback allowed. 37
5.2.2.1.1.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs . 37
5.2.2.1.1.2 User requirements at the coincident S
and T reference point. 38
5.2.2.2 Telephony 7 kHz teleservice. 40
5.2.2.2.1 Fallback allowed. 40
5.2.2.2.1.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs . 40
5.2.2.2.1.2 User requirements at the coincident S
and T reference point. 40
5.2.2.3 Videotelephony teleservice . 42
5.2.2.3.1 Fallback allowed. 42
5.2.2.3.1.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs . 42
5.2.2.3.1.2 User requirements at the coincident S
and T reference point. 43
5.3 Called user interface . 45
5.3.1 Valid behaviour . 45
5.3.1.1 Generic requirements . 45
5.3.1.1.1 Fallback allowed. 45
5.3.1.1.1.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs . 45
5.3.1.1.1.2 User requirements at the coincident S
and T reference point. 47
5.3.1.1.1.3 User requirements for interworking
with private ISDNs. 47
5.3.1.1.2 Fallback not allowed. 48
5.3.1.1.2.1 User requirements at the coincident S
and T reference point. 48
5.3.1.1.2.2 User requirements for interworking
with private ISDNs. 48
---------------------- Page: 6 ----------------------
SIST ETS 300 267-3:1998
Page 5
ETS 300 267-3: May 1997
5.3.1.2 Telephony 7 kHz teleservice.48
5.3.1.2.1 Fallback allowed .48
5.3.1.2.1.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs.48
5.3.1.2.1.2 User requirements at the coincident S
and T reference point.49
5.3.1.2.1.3 User requirements for interworking
with private ISDNs .50
5.3.1.2.2 Fallback not allowed .50
5.3.1.2.2.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs.50
5.3.1.2.2.2 User requirements at the coincident S
and T reference point.50
5.3.1.2.3 Connection management.51
5.3.1.2.3.1 User requirements at the coincident S
and T reference point.51
5.3.1.3 Videotelephony teleservice.51
5.3.1.3.1 Fallback allowed .51
5.3.1.3.1.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs.51
5.3.1.3.1.2 User requirements at the coincident S
and T reference point.52
5.3.1.3.1.3 User requirements for interworking
with private ISDNs .53
5.3.1.3.2 Fallback not allowed .54
5.3.1.3.2.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs.54
5.3.1.3.2.2 User requirements at the coincident S
and T reference point.54
5.3.1.3.3 Connection management.55
5.3.1.3.3.1 User requirements at the coincident S
and T reference point.55
5.3.2 Invalid behaviour .56
5.3.2.1 Generic requirements.56
5.3.2.1.1 Fallback allowed .56
5.3.2.1.1.1 User requirements at the coincident S
and T reference point.56
5.3.3 Inopportune behaviour .57
5.3.3.1 Generic requirements.57
5.3.3.1.1 Connection management.57
5.3.3.1.1.1 User requirements at the coincident S
and T reference point or for
interworking with private ISDNs.57
6 Combined test purposes for telephony 7 kHz and videotelephony teleservices .58
6.1 Combined test purpose format .58
6.2 Calling user interface .59
6.2.1 Valid behaviour.59
6.2.1.1 Telephony 7 kHz teleservice.59
6.2.1.1.1 Fallback allowed .59
6.2.1.1.2 Fallback not allowed .62
6.2.1.1.3 Connection management.63
6.2.1.2 Videotelephony teleservice.63
6.2.1.2.1 Fallback allowed .63
6.2.1.2.2 Fallback not allowed .67
6.2.1.2.3 Connection management.68
6.2.2 Invalid behaviour .71
6.2.2.1 Telephony 7 kHz teleservice.71
6.2.2.1.1 Fallback allowed .71
---------------------- Page: 7 ----------------------
SIST ETS 300 267-3:1998
Page 6
ETS 300 267-3: May 1997
6.2.2.2 Videotelephony teleservice . 72
6.2.2.2.1 Fallback allowed. 72
6.3 Called user interface . 74
6.3.1 Valid behaviour . 74
6.3.1.1 Telephony 7 kHz teleservice. 74
6.3.1.1.1 Fallback allowed. 74
6.3.1.1.2 Fallback not allowed. 75
6.3.1.2 Videotelephony teleservice . 76
6.3.1.2.1 Fallback allowed. 76
6.3.1.2.2 Fallback not allowed. 79
6.3.1.2.3 Connection management. 79
7 Compliance. 79
Annex A (informative): Cross reference: Generic, telephony 7 kHz and videotelephony teleservices
test purposes . 81
A.1 Generic test purposes to telephony 7 kHz and videotelephony teleservices test purposes. 81
A.2 Telephony 7 kHz to videotelephony teleservices test purposes . 83
History. 85
---------------------- Page: 8 ----------------------
SIST ETS 300 267-3:1998
Page 7
ETS 300 267-3: May 1997
Foreword
This European Telecommunication Standard (ETS) has been produced by the Signalling Protocols and
Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS is part 3 of a multi-part standard covering the Digital Subscriber Signalling System No. one
(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) telephony 7 kHz and
videotelephony teleservices, as described below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing
(PIXIT) proforma specification for the user";
Part 5: "TSS&TP specification for the network";
Part 6: "ATS and partial PIXIT proforma specification for the network".
Transposition dates
Date of adoption: 23 May 1997
Date of latest announcement of this ETS (doa): 31 August 1997
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 28 February 1998
Date of withdrawal of any conflicting National Standard (dow): 28 February 1998
Introduction
This ETS is divided into seven clauses. Clauses 1 to 3 form the scope, references and abbreviations.
Clause 4 contains the test suite structure. Clause 5 contains the complete list of test purposes. Clause 6
contains the list of combined test purposes, i.e. test purposes which can be tested together in one test
case. Clause 7 contains the requirements for a generic or abstract test suite to comply with this ETS.
It is been assumed that the Implementation Under Test (IUT) already complies with the conformance
requirements associated with the ISDN basic call as defined in ETS 300 102-1. This is specified as a
requirement in ETS 300 267-2, clause 5. ETS 300 267-1, subclause 5.1, states that the additional generic
requirements of clause 5 are defined to be compatible with the existing requirements of ETS 300 102-1.
The following approach is adopted with regard to specifying test purposes:
- resultant states of the IUT are not checked following receipt of messages which comply with
ETS 300 102-1. Resultant states of the IUT are checked following receipt of messages which do
not comply with ETS 300 102-1, e.g. a CONNECT message which contains a Bearer capability
information element;
- for ETS 300 267-1, clause 5, the use of the word "assumes", in the case of an IUT at the originating
interface, is interpreted as meaning that the IUT checks in-band: such test purposes are applicable,
therefore, only to IUTs which contain in-band entities.
In cases where ETS 300 267-1 specifies that requirements in ETS 300 102-1 shall apply, it is assumed
that, because the IUT already complies with ETS 300 102-1, it also complies with these requirements.
However, when specifying the abstract test cases, including test case selection, the requirements in
ETS 300 102-1 need to be taken into account.
---------------------- Page: 9 ----------------------
SIST ETS 300 267-3:1998
Page 8
ETS 300 267-3: May 1997
Blank page
---------------------- Page: 10 ----------------------
SIST ETS 300 267-3:1998
Page 9
ETS 300 267-3: May 1997
1 Scope
This third part of ETS 300 267 is applicable to the stage three of the telephony 7 kHz and videotelephony
teleservices for the pan-European Integrated Services Digital Network (ISDN) as provided by European
public telecommunications operators at the T reference point or coincident S and T reference point (as
specified in ITU-T Recommendation I.411 [11] by means of the Digital Subscriber Signalling System
No. one (DSS1) protocol. ETS 300 267-1 [5] provides the protocol specification and ETS 300 267-2 [6] the
Protocol Implementation Conformance Statement (PICS) proforma specification. Stage three identifies the
protocol procedures and switching functions needed to support a telecommunications service (see CCITT
Recommendation I.130 [10]).
This ETS provides the Test Suite Structure and Test Purposes (TSS&TP) for the user side. It covers the
protocol requirements as defined in ETS 300 267-1 [5] and provides test purposes for the additional
generic requirements for basic telecommunication services not defined in ETS 300 102-1 [2]
(ETS 300 267-1 [5], clause 5), for the telephony 7 kHz teleservice (ETS 300 267-1 [5], clause 6) and for
the videotelephony teleservice (ETS 300 267-1 [5], clause 7).
Two types of implementations are covered:
- an implementation which supports user requirements at the coincident S and T reference point;
- an implementation which supports user requirements for interworking with private ISDNs at the
T reference point.
2 Normative references
This ETS incorporates by dated or undated references, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 082 (1992): "Integrated Services Digital Network (ISDN); 3,1 kHz
telephony teleservice; End-to-end compatibility requirements for telephony
terminals".
[2] ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-network
interface layer 3; Specifications for basic call control".
[3] ETS 300 144: "Integrated Services Digital Network (ISDN); Audiovisual services;
Frame structure for a 64 kbit/s to 1 920 kbit/s channel and associated syntax for
inband signalling" (equivalent to ITU-T Recommendation H.221).
[4] ETS 300 145: "Integrated Services Digital Network (ISDN); Audiovisual services;
Videotelephone systems and terminal equipment operating on one or two
64 kbit/s channels".
[5] ETS 300 267-1 (1994) including A1 (1996): "Integrated Services Digital Network
(ISDN); Telephony 7 kHz and videotelephony teleservices; Digital Subscriber
Signalling System No. one (DSS1) protocol; Part 1: Protocol specification".
[6] ETS 300 267-2 (1996): "Integrated Services Digital Network (ISDN); Telephony
7 kHz and videotelephony teleservices; Digital Subscriber Signalling System No.
one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement
(PICS) proforma specification".
[7] I-ETS 300 281: "Integrated Services Digital Network (ISDN); Telephony 7 kHz
teleservice; Terminal requirements necessary for end-to-end compatibility".
---------------------- Page: 11 ----------------------
SIST ETS 300 267-3:1998
Page 10
ETS 300 267-3: May 1997
[8] I-ETS 300 314: "Integrated Services Digital Network (ISDN); Digital Subscriber
Signalling System No. one (DSS1); Protocol Implementation Conformance
Statement (PICS) proforma specification for signalling network layer protocol for
circuit-mode basic call control (basic access, user)".
[9] CCITT Recommendation G.711 (1988): "Pulse code modulation (PCM) of voice
frequencies".
[10] CCITT Recommendation I.130 (1988): "Method for the characterization of
telecommunication services supported by an ISDN and network capabilities of
an ISDN".
[11] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces -
Reference configurations".
[12] ISO/IEC 9646-2: "Information technology - Open systems interconnection -
Conformance testing methodology and framework - Part 2: Abstract test suite
specification".
[13] ISO/IEC 9646-3: "Information technology - Open systems interconnection -
Conformance testing methodology and framework - Part 3: The Tree and
Tabular Combined Notation".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this ETS, the definitions in ETS 300 267-1 [5] apply in addition to the following
definitions:
BC1: The first (lower priority) Bearer capability information element included in a SETUP message
allowing bearer capability selection.
BC2: The second (higher priority) Bearer capability information element included in a SETUP message
allowing bearer capability selection.
BC=speech: A Bearer capability information element with its information transfer capability field set to
"speech" and its user information layer one protocol field set to "G.711 A-law".
BC=UDI/TA: A Bearer capability information element with its information transfer capability field set to
"UDI/TA" and its user information layer one protocol field set to "Recommendations H.221 and H.242".
BC=UDI: A Bearer capability information element with its information transfer capability field set to "UDI"
and its user information layer one protocol field set to "Recommendations H.221 and H.242".
bit-rate allocation signal: Bit position within the frame structure to transmit commands, control and
indication signals, capabilities.
HLC1: The first (lower priority) High layer compatibility information element in a SETUP message allowing
high layer compatibility selection.
HLC2: The second (higher priority) High layer compatibility information element in a SETUP message
allowing high layer compatibility selection.
HLC=telephony: A High layer compatibility information element with its high layer characteristics
identification field set to "telephony".
HLC=videotelephony_ic: A High layer compatibility information element with its high layer characteristics
identification field set to "110 0000 - videotelephony (Recommendation F.721)" and its extended
audiovisual characteristics identification field set to "000 0001 - capability set of initial channel of
Recommendation H.221".
---------------------- Page: 12 ----------------------
SIST ETS 300 267-3:1998
Page 11
ETS 300 267-3: May 1997
HLC=videotelephony_nex: A High layer compatibility information element with its high layer
characteristics identification field set to "110 0000 - videotelephony (Recommendation F.721)" but not
containing an extended audiovisual characteristics identification field.
HLC=videotelephony_sc: A High layer compatibility information element with its high layer
characteristics identification field set to "110 0000 - videotelephony (Recommendation F.721)" and its
extended audiovisual characteristics identification field set to "000 0010 - capability set of subsequent
channel of Recommendation H.221".
Implementation Under Test (IUT): The component of the system under test (user terminal or private
ISDN) providing the protocol specified in ETS 300 267-1 [5] at the S/T or T reference point.
in-band signalling: Signalling via the bit-rate allocation signal of the frame structure, as defined in
ETS 300 144 [3].
mode 0F: Transmission mode in which the initial channel contains framing, and 7-bit G.711 audio signal
is being transmitted.
mode 0U: Transmission mode in which the initial channel does not contain framing, and 8-bit G.711 audio
signal is being transmitted.
PI=#1: A Progress indicator information element, with its progress description field set to #1 "Call is not
end-to-end ISDN".
PI=#2: A Progress indicator information element, with its progress description field set to #2 "Destination
address is non-ISDN".
PI=#3: A Progress indicator information element, with its progress description field set to #3 "Origination
address is non-ISDN".
PI=#4: A Progress indicator information element, with its progress description field set to #4 "Call has
returned to the ISDN".
PI=#5: A Progress indicator information element, with its progress description field set to #5 "interworking
has occurred and has resulted in a telecommunications service change".
PI=#8: A Progress indicator information element, with its progress description field set to #8 "In-band
information or appropriate pattern now available".
telephony 7 kHz fallback allowed SETUP message: A SETUP message containing two BCs, with the
first BC=speech and the second BC=UDI/TA, a HLC=telephony, and not containing a LLC.
telephony 7 kHz fallback not allowed SETUP message: A SETUP message containing a single
BC=UDI/TA and a single HLC=telephony, and not containing a LLC.
videotelephony fallback allowed SETUP message: A SETUP message containing two BCs, with the
first BC=speech and the second BC=UDI/TA, and two HLCs, with the first HLC=telephony and the second
HLC=videotelephony_ic, and not containing a LLC.
videotelephony fallback not allowed SETUP message: A SETUP message containing a single
BC=UDI/TA and a single HLC=videotelephony_ic, and not containing a LLC.
videotelephony SETUP message for CR2 : A SETUP message containing a single BC=UDI and a
single HLC=videotelephony_sc. The SETUP message is used to establish the second connection in a
videotelephony call requiring two connections.
---------------------- Page: 13 ----------------------
SIST ETS 300 267-3:1998
Page 12
ETS 300 267-3: May 1997
3.2 Abbreviations
For the purposes of this ETS, the following abbreviations apply:
ATS Abstract Test Suite
BC Bearer Capability information element
CR1 Call Reference for the first call
CR2 Call Reference for the second call
CR3 Call Reference for the third call
HLC High Layer Compatibility information element
IUT Implementation Under Test
LLC Low Layer Compatibility information element
PI Progress Indicator information element
TP Test Purpose
TSS Test Suite Structure
UDI Unrestricted Digital Information
UDI/TA Unrestricted Digital Information with Tones/Announcements
For TSS specific abbreviations, see clause 4.
4 Test Suite Structure (TSS)
The test suite is structured as a tree. Six test group levels are defined. The TSS is depicted in figure 1.
4.1 First test group level
The first test group level contains the name of the test suite:
UT7V User side telephony 7 kHz, videotelephony teleservices and generic protocol.
4.2 Second test group level
The second test group level indicates whether the IUT is the calling or the called terminal:
ORIG Calling User Interface;
DEST Called User Interface.
4.3
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.