SIST EN ISO 10510:2011

Tapping screw and washer assemblies with plain washers (ISO 10510:2011)

ISO 10510:2010 specifies the requirements for tapping screws and plain washer assemblies with spaced threads from ST2,2 to ST9,5 inclusive, flat seating heads and mechanical properties as specified in ISO 2702.

Kombi-Blechschrauben mit flachen Scheiben (ISO 10510:2011)

Diese Internationale Norm legt Anforderungen für Kombi-Blechschrauben mit Blechschraubengewinden von
ST2,2 bis ST9,5, mit flach aufliegenden Köpfen und mechanischen Eigenschaften nach ISO 2702 fest.
Die flachen Scheiben sind unverlierbar und können sich frei drehen.

Vis à tôle à rondelle plate incorporée (ISO 10510:2011)

L'ISO 10510:2010 sp�cifie les caract�ristiques des vis � t�le � rondelle plate incorpor�e de filetage ST2,2 � ST9,5 inclus, pr�sentant une surface d'appui plane, et dont les caract�ristiques m�caniques sont conformes � l'ISO 2702.

Pločevinski vijaki z ujeto podložko (ISO 10510:2011)

ISO 10510:2010 določa zahteve za pločevinaste vijake z ujeto podložko in razmiki navojev med ST2,2 do vključno ST9,5, s ploščato glavo in mehanskimi lastnostmi, kot jih določa ISO 2702.

General Information

• Status: Published
• Publication Date: 11-Oct-2011
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 22-Sep-2011
• Due Date: 27-Nov-2011
• Completion Date: 12-Oct-2011
• Ref Project: EN ISO 10510:2011 - Tapping screw and washer assemblies with plain washers (ISO 10510:2011)

Relations

• Replaces: SIST EN ISO 10510:2001 - Tapping screw and washer assemblies with plain washers (ISO 10510:1999)
• Effective Date: 01-Nov-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10510:2011
01-november-2011
1DGRPHãþD
SIST EN ISO 10510:2001
3ORþHYLQVNLYLMDNL]XMHWRSRGORåNR,62
Tapping screw and washer assemblies with plain washers (ISO 10510:2011)
Kombi-Blechschrauben mit flachen Scheiben (ISO 10510:2011)
Vis à tôle à rondelle plate incorporée (ISO 10510:2011)
Ta slovenski standard je istoveten z: EN ISO 10510:2011
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 10510:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10510:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 10510:2011


EUROPEAN STANDARD
EN ISO 10510

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2011
ICS 21.060.10 Supersedes EN ISO 10510:1999
English Version
Tapping screw and washer assemblies with plain washers (ISO
10510:2011)
Vis à tôle à rondelle plate imperdable (ISO 10510:2011) Kombi-Blechschrauben mit flachen Scheiben (ISO
10510:2011)
This European Standard was approved by CEN on 17 January 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10510:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10510:2011
EN ISO 10510:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10510:2011
EN ISO 10510:2011 (E)
Foreword
This document (EN ISO 10510:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at
the latest by October 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10510:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 10510:2011 has been approved by CEN as a EN ISO 10510:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 10510:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 10510:2011

INTERNATIONAL ISO
STANDARD 10510
Second edition
2011-04-01

Tapping screw and washer assemblies
with plain washers
Vis à tôle à rondelle plate imperdable




Reference number
ISO 10510:2011(E)
©
ISO 2011

---------------------- Page: 7 ----------------------

SIST EN ISO 10510:2011
ISO 10510:2011(E)


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2011 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 10510:2011
ISO 10510:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft
...