SIST EN 60691:2004/A2:2010
(Amendment)Thermal-links - Requirements and application guide (IEC 60691:2002/A2:2010)
Thermal-links - Requirements and application guide (IEC 60691:2002/A2:2010)
Temperatursicherungen - Anforderungen und Anwendungshinweise (IEC 60691:2002/A2:2010)
Protecteurs thermiques - Prescriptions et guide d'application (CEI 60691:2002/A2:2010)
Termični taljivi vložki - Zahteve in navodilo za uporabo (IEC 60691:2002/A2:2010)
Velja za termične taljive vložke, namenjene vključitvi v električne naprave in elektronsko opremo ter njihove sestavne dele za uporabo v zaprtih prostorih za zaščito pred prekomernimi temperaturami pod neobičajnimi pogoji. Velja lahko tudi za termične taljive vložke, ki se uporabljajo pod drugimi zunanjimi pogoji, če so podnebne in druge okoliščine v neposredni bližini takega termičnega taljivega vložka primerljive z okoliščinami v tem standardu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60691:2004/A2:2010
01-maj-2010
7HUPLþQLWDOMLYLYORåNL=DKWHYHLQQDYRGLOR]DXSRUDER,(&$
Thermal-links - Requirements and application guide (IEC 60691:2002/A2:2010)
Temperatursicherungen - Anforderungen und Anwendungshinweise (IEC
60691:2002/A2:2010)
Protecteurs thermiques - Prescriptions et guide d'application (CEI 60691:2002/A2:2010)
Ta slovenski standard je istoveten z: EN 60691:2003/A2:2010
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
SIST EN 60691:2004/A2:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60691:2004/A2:2010
---------------------- Page: 2 ----------------------
SIST EN 60691:2004/A2:2010
EUROPEAN STANDARD
EN 60691/A2
NORME EUROPÉENNE
March 2010
EUROPÄISCHE NORM
ICS 29.120.50
English version
Thermal-links -
Requirements and application guide
(IEC 60691:2002/A2:2010)
Protecteurs thermiques - Temperatursicherungen -
Prescriptions et guide d'application Anforderungen und Anwendungshinweise
(CEI 60691:2002/A2:2010) (IEC 60691:2002/A2:2010)
This amendment A2 modifies the European Standard EN 60691:2003; it was approved by CENELEC on
2010-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60691:2003/A2:2010 E
---------------------- Page: 3 ----------------------
SIST EN 60691:2004/A2:2010
EN 60691:2003/A2:2010 - 2 -
Foreword
The text of document 32C/425/FDIS, future amendment 2 to IEC 60691:2002, prepared by SC 32C,
Miniature fuses, of IEC TC 32, Fuses, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as amendment A2 to EN 60691:2003 on 2010-03-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.