SIST EN ISO 19490:2025
(Main)Dentistry - Sinus membrane elevator (ISO 19490:2025)
Dentistry - Sinus membrane elevator (ISO 19490:2025)
This document specifies requirements and their test methods for sinus membrane elevators used during the placement of dental implants for sinus floor lifting. It also specifies the requirements for their marking and labelling.
Zahnheilkunde - Sinusmembranelevator (ISO 19490:2025)
Dieses Dokument legt Anforderungen und die dazugehörigen Prüfverfahren für Sinusmembranelevatoren, die während der Platzierung von Dentalimplantaten zur Sinusbodenanhebung verwendet werden, fest. Es beschreibt auch die Anforderungen an ihre Markierung und Kennzeichnung.
Médecine bucco-dentaire - Élévateur de membrane sinusienne (ISO 19490:2025)
Le présent document spécifie les exigences et les méthodes d’essai relatives aux élévateurs de membrane sinusienne utilisés en implantologie dentaire pour relever le plancher sinusien. Il spécifie également les exigences relatives à leur marquage et étiquetage.
Zobozdravstvo - Sinusno membransko dvigalo (ISO 19490:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2025
Nadomešča:
SIST EN ISO 19490:2017
Zobozdravstvo - Sinusno membransko dvigalo (ISO 19490:2025)
Dentistry - Sinus membrane elevator (ISO 19490:2025)
Zahnheilkunde - Sinusmembranelevator (ISO 19490:2025)
Médecine bucco-dentaire - Élévateur de membrane sinusienne (ISO 19490:2025)
Ta slovenski standard je istoveten z: EN ISO 19490:2025
ICS:
11.060.25 Zobotehnični instrumenti Dental instruments
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 19490
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2025
EUROPÄISCHE NORM
ICS 11.060.25 Supersedes EN ISO 19490:2017
English Version
Dentistry - Sinus membrane elevator (ISO 19490:2025)
Médecine bucco-dentaire - Élévateur de membrane Zahnheilkunde - Sinusmembranelevator (ISO
sinusienne (ISO 19490:2025) 19490:2025)
This European Standard was approved by CEN on 12 July 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19490:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 19490:2025) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2026, and conflicting national standards
shall be withdrawn at the latest by February 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19490:2017.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 19490:2025 has been approved by CEN as EN ISO 19490:2025 without any modification.
International
Standard
ISO 19490
Second edition
Dentistry — Sinus membrane
2025-07
elevator
Médecine bucco-dentaire — Élévateur de membrane sinusienne
Reference number
ISO 19490:2025(en) © ISO 2025
ISO 19490:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 19490:2025(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Requirements . 2
5.1 General .2
5.2 Resistance to reprocessing .2
5.3 Hardness of the working part .2
5.4 Connection of shank and handle .2
5.5 Shape of working part .2
6 Test method . 4
7 Marking, labelling and packaging . 4
8 Instruction for use . 4
iii
------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.