SIST TBR 036 E1:2004

Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile communications (GSM); DECT access to GSM Public Land Mobile Networks (PLMNs) for 3,1 kHz speech applications

This TBR specifies the technical characteristics to be provided by terminal equipment which is capable of connecting to a GSM network (PLMN) and which uses DECT for network access. The cordless transmission for such terminal equipment operates  within the frequency band 1880 - 1900 MHz.  A DECT-terminal equipment comprises two elements, referred to as a Fixed Part (FP) and a Portable Part (PP). The objective of this TBR is to ensure air-interface interoperability beteween a FP and a PP following the DECT/GSM interworking profile IWP (Note 2), where these parts are capable of 3,1 kHz telephony applications, and where the FP is connected to the GSM PLMN in order to provide GSM services (according to TBR 19/20) over the DECT air-interface.  For functional parts of a FP, that are terminal equipment, which are declared to conform to the basic CTRs for DECT (Note 1) and to the DECT/GSM IWP, the requirements of this TBR shall apply, in addition to the attachment requirements for the appropriate GSM PLMN.  The requirements of this TBR are also applicable for the complete set of functionality of a PP declared to conform to the DECT/GSM IWP. For a PP, this TBR is in addition to the basic CTRs for DECT.  Where a feature is indicated as optional, it need not to be provided. But where such a feature is provided, the FP and/or PP shall conform to the requirements and tests of this TBR. This TBR is structured to allow type approval of the FP and PP as separate items. For each requirement in this TBR, a test is given, including measurement methods where applicable. The terminal equipment may be stimulated to perform the tests by additional equipment if necessary.  This TBR does not apply to FPs where they form part of the GSM PLMN.  Note 1: The basic CTR fordDECT are the general attachment requirements (CTR 6), requirements for telephony applications (CTR 10) and requirements for Generic Access Profile (CTR 22).  Note 2: With respect to this TBR, the DECT/GSM IWP is based on the pr

Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Globalni sistem mobilnih komunikacij (GSM) - Dostop sistema DECT do javnih kopenskih mobilnih omrežij (PLMNs) za govorne aplikacije 3,1 kHz

General Information

• Status: Published
• Publication Date: 30-Sep-2004
• ICS: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2004
• Due Date: 01-Oct-2004
• Completion Date: 01-Oct-2004
• Mandate: T-317
• Ref Project: ETSI TBR 036 ed.1 (1998-05) - Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile communications (GSM); DECT access to GSM Public Land Mobile Networks (PLMNs) for 3,1 kHz speech applications

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2004
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH'(&7*OREDOQLVLVWHP
PRELOQLKNRPXQLNDFLM*60'RVWRSVLVWHPD'(&7GRMDYQLKNRSHQVNLKPRELOQLK
RPUHåLM3/01V]DJRYRUQHDSOLNDFLMHN+]
Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile
communications (GSM); DECT access to GSM Public Land Mobile Networks (PLMNs)
for 3,1 kHz speech applications
Ta slovenski standard je istoveten z: TBR 036 Edition 1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL TBR 36
BASIS for May 1998
REGULATION
Source: DECT Reference: DTBR/DECT-010059
ICS: 33.020
Key words: DECT, GSM, TBR, Access, radio, terminal, type approval
Digital Enhanced Cordless Telecommunications (DECT);
Global System for Mobile communications (GSM);
DECT access to GSM Public Land Mobile Network (PLMN)
for 3,1 kHz speech applications
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Internet: [e-mail] - http://www.etsi.fr - http://www.etsi.org
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998. All rights reserved.

Page 2
TBR 36: May 1998
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

Page 3
TBR 36: May 1998
Contents
Foreword . 5
1 Scope. 7
2 Normative references . 7
3 Definitions and abbreviations. 10
3.1 Definitions. 10
3.2 Abbreviations. 10
4 How to use this TBR . 11
5 Requirements. 12
5.1 Network (NWK) layer features. 12
5.2 Data Link Control (DLC) layer services . 13
5.3 Medium Access Control (MAC) layer services . 13
5.4 Application features. 13
5.5 PHysical (PH) layer requirements . 13
6 Test specification . 14
6.1 Portable Part (PP) . 14
6.1.1 NWK layer. 14
6.1.1.1 Test suite structure. 14
6.1.1.2 Test case index . 15
6.1.2 DLC layer . 17
6.1.3 MAC layer . 17
6.1.4 PH layer . 17
6.2 Fixed Part (FP) . 17
6.2.1 NWK layer. 18
6.2.1.1 Test suite structure. 18
6.2.1.2 Test case index . 19
6.2.2 DLC layer . 21
6.2.3 MAC layer . 21
6.2.4 PH layer . 21
Annex A (normative): TBR Requirements Tables (TBR-RTs). 22
A.1 Introduction . 22
A.2 Portable Part (PP). 23
A.2.1 Tables for PP NWK layer . 23
A.2.1.1 Major Capabilities . 23
A.2.1.1.1 Entities. 23
A.2.1.1.2 CC features . 24
A.2.1.1.3 MM features . 25
A.2.1.1.4 LCE features . 25
A.2.1.1.5 Procedures. 26
A.2.1.2 Messages. 28
A.2.1.2.1 Call control messages. 28
A.2.1.2.2 Mobility management messages. 30
A.2.1.2.3 Link control entity messages. 30
A.2.2 Tables for PP DLC layer.31
A.2.3 Tables for PP MAC layer. 31
A.2.4 Tables for PP PHL layer.31
A.2.5 Tables for PP Application requirements. 31

Page 4
TBR 36: May 1998
A.3 Fixed Part (FP).31
A.3.1 Tables for FP NWK layer.31
A.3.1.1 Major capabilities.31
A.3.1.1.1 Entities.31
A.3.1.1.2 CC features .32
A.3.1.1.3 MM features.33
A.3.1.1.4 LCE features.33
A.3.1.1.5 Procedures .34
A.3.1.2 Messages.36
A.3.1.2.1 Call control messages .36
A.3.1.2.2 Mobility management messages.37
A.3.1.2.3 Link control entity messages .38
A.3.2 Tables for FP DLC layer .38
A.3.3 Tables for FP MAC layer.38
A.3.4 Tables for FP PHL layer.38
A.3.5 Tables for FP application requirements.38
Annex B (informative): Bibliography.39
History.40

Page 5
TBR 36: May 1998
Foreword
This Technical Basis for Regulation (TBR) has been produced by the Digital Enhanced Cordless
Telecommunications (DECT) Project of the European Telecommunications Standards Institute (ETSI).
Details of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI) may be
found in EN 300 175, parts 1 - 8 [1] to [8].
The present document has been produced by ETSI in response to a mandate from the European
Commission issued under Council Directive 83/189/EEC (as amended) laying down a procedure for the
provision of information in the field of technical standards and regulations.
The present document is intended to become a Harmonized Standard as requested by the above
mentioned mandate, the reference of which will be published in the Official Journal of the European
Communities referencing the Council Directive on the approximation of the laws of the Member States
concerning telecommunications terminal equipment, including the mutual recognition of their conformity
(Directive 91/263/EEC, known as the "TTE Directive").
A common technical regulation may be established by the European Commission in accordance with the
Directive.
Technical specifications relevant to the 91/263/EEC Directive are given in the TBR Requirements Tables
(TBR-RTs) in annex A.
Page 6
TBR 36: May 1998
Blank page
Page 7
TBR 36: May 1998
1 Scope
This Technical Basis for Regulation (TBR) specifies the technical characteristics to be provided by
terminal equipment which is capable of connection to a Global System for Mobile communications (GSM)
Public Land Mobile Network (PLMN) and which uses Digital Enhanced Cordless Telecommunications
(DECT) for network access. The cordless transmissions for such terminal equipment operate within the
frequency band 1 880 - 1 900 MHz.
A DECT terminal equipment comprises two elements, referred to as a Fixed Part (FP) and Portable Part
(PP). The objective of this TBR is to ensure air-interface interoperability between a FP and PP which
follow the DECT/GSM interworking profile (IWP) (see note 2), where these parts are capable of 3,1 kHz
telephony applications, and where the Fixed Part is connected to a GSM PLMN in order to provide GSM
services (according to TBR 19 and TBR 20) over the DECT air-interface.
For functional parts of a FP, that are terminal equipment, which are declared to conform to the basic
CTRs for DECT (see note 1) and to the DECT/GSM IWP, the requirements of this TBR shall apply, in
addition to the attachment requirements for the appropriate GSM PLMN.
This TBR does not apply to FPs where they form a part of the GSM PLMN.
The requirements of this TBR are also applicable for the complete set of functionality of a PP declared to
conform to the DECT/GSM IWP. For a PP, this TBR is in addition to the basic CTRs for DECT.
Where a feature is indicated as optional it need not to be provided, but where such a feature is provided,
the FP and/or the PP shall conform to the requirements and tests of this TBR. This TBR is structured to
allow type approval of the FP and PP as separate items. For each requirement in this TBR a test is given,
including measurement methods where applicable. The terminal equipment may be stimulated to perform
the tests by additional equipment if necessary.
NOTE 1: The basic CTRs for DECT are the general attachment requirements (CTR 6),
requirements for telephony applications (CTR 10) and requirements of Generic Access
Profile (CTR 22).
NOTE 2: In the respect of this TBR, the DECT/GSM inter-working profile is based on the
provision of access mappings/inter-working requirements of ETS 300 370 [9] and the
general description of services, capabilities and information flows of ETS 300 466 [26].
2 Normative references
This TBR incorporates, by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this TBR only when incorporated in it by amendment or revision. For undated references the
latest edition of the publication referred to applies.
[1] EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 1: Overview".
[2] EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 2: Physical layer (PHL)".
[3] EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 3: Medium Access Control (MAC) layer".
[4] EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 4: Data Link Control (DLC) layer".
[5] EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 5: Network (NWK) layer".
[6] EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 6: Identities and addressing".

Page 8
TBR 36: May 1998
[7] EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 7: Security features".
[8] EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 8: Speech coding and transmission".
[9] ETS 300 370: "Digital Enhanced Cordless Telecommunications / Global System
for Mobile communications (DECT/GSM) inter-working profile; Access and
mapping (Protocol/procedure description for 3,1 kHz speech service)".
[10] EN 300 444: "Digital Enhanced Cordless Telecommunications (DECT); Generic
Access Profile (GAP)".
[11] ETS 300 476-1 (1996): "Digital Enhanced Cordless Telecommunications
(DECT); Common Interface (CI); Protocol Implementation Conformance
Statement (PICS) proforma; Part 1: Network (NWK) layer - Portable radio
Termination (PT)".
[12] ETS 300 476-2 (1996): "Digital Enhanced Cordless Telecommunications
(DECT); Common Interface (CI); Protocol Implementation Conformance
Statement (PICS) proforma; Part 2: Data Link Control (DLC) layer - Portable
radio Termination (PT)".
[13] ETS 300 476-3 (1996): "Digital Enhanced Cordless Telecommunications
(DECT); Common Interface (CI); Protocol Implementation Conformance
Statement (PICS) proforma; Part 3: Medium Access Control (MAC) layer -
Portable radio Termination (PT)".
[14] ETS 300 476-4 (1996): "Digital Enhanced Cordless Telecommunications
(DECT); Common Interface (CI); Protocol Implementation Conformance
Statement (PICS) proforma; Part 4: Network (NWK) layer - Fixed radio
Termination (FT)".
[15] ETS 300 476-5 (1996): "Digital Enhanced Cordless Telecommunications
(DECT); Common Interface (CI); Protocol Implementation Conformance
Statement (PICS) proforma; Part 5: Data Link Control (DLC) layer - Fixed radio
Termination (FT)".
[16] ETS 300 476-6 (1996): "Digital Enhanced Cordless Telecommunications
(DECT); Common Interface (CI); Protocol Implementation Conformance
Statement (PICS) proforma; Part 6: Medium Access Control (MAC) layer - Fixed
radio Termination (FT)".
[17] ETS 300 476-7 (1996): "Digital Enhanced Cordless Telecommunications
(DECT); Common Interface (CI); Protocol Implementation Conformance
Statement (PICS) proforma; Part 7: Physical layer".
[18] ETS 300 474-1: "Digital Enhanced Cordless Telecommunications (DECT);
Generic Access Profile (GAP); Profile requirement list and profile specific
Implementation Conformance Statement (ICS) proforma; Part 1: Portable radio
Termination (PT)".
[19] ETS 300 474-2: "Digital Enhanced Cordless Telecommunications (DECT);
Generic Access Profile (GAP); Profile requirement list and profile specific
Implementation Conformance Statement (ICS) proforma; Part 2: Fixed radio
Termination (FT)".
[20] 91/263/EEC: "Council Directive of 29 April 1991 on the approximation of the
laws of the Member States concerning telecommunications terminal equipment,
including the mutual recognition of their conformity" (Terminal Directive).

Page 9
TBR 36: May 1998
[21] ETS 300 704-1: "Digital Enhanced Cordless Telecommunications/Global
System for Mobile communications (DECT/GSM) Interworking Profile (IWP);
Profile Implementation Conformance Statement (ICS); Part 1: Portable radio
Termination (PT)".
[22] ETS 300 704-2: "Digital Enhanced Cordless Telecommunications/Global
System for Mobile communications (DECT/GSM) Interworking Profile (IWP);
Profile Implementation Conformance Statement (ICS); Part 2: Fixed radio
Termination (FT)".
[23] TBR 6: "Digital Enhanced Cordless Telecommunications (DECT); General
terminal attachment requirements".
[24] TBR 10: "Digital Enhanced Cordless Telecommunications (DECT); General
terminal attachment requirements; Telephony applications".
[25] TBR 22: "Radio Equipment and Systems (RES); Attachment requirements for
terminal equipment for Digital Enhanced Cordless Telecommunications (DECT)
Generic Access Profile (GAP) applications".
[26] ETS 300 466: "Digital European Cordless Telecommunications/Global System
for Mobile Communications (DECT/GSM) interworking profile; General
description of service requirements; Functional capabilities and information
flows".
[27] ETS 300 494-2: "Digital Enhanced Cordless Telecommunications (DECT);
Generic Access Profile (GAP); Profile Test Specification (PTS); Part 2: Profile
Specific Test Specification (PSTS) - Portable radio Termination (PT)".
[28] ETS 300 702-2: "Digital Enhanced Cordless Telecommunications/Global
System for Mobile telecommunications (DECT/GSM) interworking profile; Part 2:
Profile Specific Test Specification (PSTS) Portable radio Termination (PT)".
[29] ETS 300 702-3: "Digital Enhanced Cordless Telecommunications/Global
System for Mobile telecommunications (DECT/GSM) interworking profile; Part 3:
Profile Specific Test Specification (PSTS) Fixed radio Termination (FT)".

Page 10
TBR 36: May 1998
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this TBR, the definitions given in ETS 300 370 [9], EN 300 444 [10] and EN 300 175,
Parts 1 to 7 [1] to [7] apply.
3.2 Abbreviations
For the purposes of this TBR, the following abbreviations apply:
AC Authentication Code
ARI Access Rights Identity (see PARI, SARI and TARI)
ATS Abstract Test Suite
BCD Binary Coded Decimal
BSC GSM Base Station Controller
Cat Category
CC Call Control
CCITT (The) International Telegraph and Telephone Consultative Committee
CI Common Interface
CK Cipher Key
CTR Common Technical Regulation
DAM DA DECT Authentication Module DECT Application
DAM DECT Authentication Module
DCK Derived Cipher Key
DECT Digital Enhanced Cordless Telecommunications
DLC Data Link Control
DSAA DECT Standard Authentication Algorithm
DTMF Dual Tone Multi-Frequency
FP Fixed Part
FT Fixed radio Termination
GAP Generic Access Profile
GOP GSM Operator code
GSM Global System for Mobile Communications
ICS Implementation Conformance Statement
IMEI International Mobile Equipment Identity
IMSI International Mobile Subscriber Identity
IPEI International Portable Equipment Identity
IPUI International Portable User Identity
ISDN Integrated Services Digital Network
ISO International Organization for Standardization
IUT Implementation Under Test
IWU Inter-Working Unit
IXIT Implementation eXtra Information for Testing
K authentication Key
LCE Link Control Entity
LLME Lower Layer Management Entity
LLN Logical Link Number
MAC Medium Access Control
MAP GSM Mobile Application Part
MM Mobility Management
MS Mobile Station
MSB Most Significant Bit
MSC Mobile Switching Center
NLF New Link Flag
NWK NetWorK
OSI Open Systems Interconnection
PA Portable Application
PARI Primary Access Rights Identity
PARK Portable Access Rights Key
PE Portable Equipment
PH PHysical
PICS Protocol Implementation Conformance Statement

Page 11
TBR 36: May 1998
PIXIT Protocol Implementation eXtra Information for Testing
PLMN Public Land Mobile Network
PP Portable Part
PSTN Public Switched Telephone Network
PSTS Profile Specific Test Specification
PT Portable radio Termination
PTS Profile Test Specification
PUN Portable User Number
PUT Portable User Type
RAND A RANDom challenge issued by a FP
RES A RESponse calculated by a PP
RFP Radio Fixed Part
RFPI Radio Fixed Part Identity
RS A value used to establish authentication session keys
SARI Secondary Access Rights Identity
SIM/DAM GA Subscriber Identity Module/DECT Authentication Module, GSM Application
SRES A GSM specific authentication response calculated by the GSM SIM or the DAM
GA
SUT System Under Test
TARI Tertiary Access Rights Identity
TBR Technical Basis for Regulation
TBR-RT TBR Requirements Table
TMSI Temporary Mobile Subscriber Identity
TPUI Temporary Portable User Identity
TS Test System
TSS&TP Test Suite Structure & Test Purposes
4 How to use this TBR
This TBR contains one set of tables for the PP and one set of tables for the FP. Each set of tables is
divided into subsets depending on the particular DECT layer. Each set of tables comprises:
- a test suite structure table;
- a test case index table;
- a TBR-RT feature table;
- a TBR-RT procedure table;
- a messages/frames table.
If a particular feature, procedure or message specified in EN 300 175, parts 1 to 8 [1] to [8] is not listed in
any table it shall be considered as out of scope of this TBR and not required to be tested.

Page 12
TBR 36: May 1998
5 Requirements
The DECT/GSM IWP features, services and requirements as defined in ETS 300 370 [9] are considered
to fall under the essential requirements specified in article 4 of the Council directive 91/263/EEC [20]
applying to terminal equipment, given in the following subclauses. The column TD Cat (Terminal Directive
Category) identifies the applicable clauses of article 4 of directive 91/263/EEC [20].
NOTE: This clause does not specify the exact status (e.g. mandatory or optional) of the listed
features, services and requirements. This is specified in annex A.
5.1 Network (NWK) layer features
In addition to the requirements for GAP as defined in TBR 22 [25] the following DECT/GSM specific
requirements apply:
Table 1: Network layer requirements and justifications
ETS 300 370 DESCRIPTION TBR JUSTIFICATION TD Cat
Item
5.4.2 Authentication of PT To ensure the correct authentication of a terminal d, f
as a result of a GSM authentication procedure
5.4.2 Identification of PT To ensure the correct identification of a terminal as d, f
a result of a GSM identification procedure
5.4.2 Location registration To ensure the correct location of a terminal for call d, f
establishment and access to other services (e.g.
charging) covering the GSM normal location
update, periodic location update and attach
procedure
5.4.2 Detach To ensure the terminal can indicate to the network e, f
(GSM) that it is not ready to receive incoming calls
5.4.2 Temporary identity To ensure the terminal behaves correctly on f
assignment receiving a temporary identity assignment as a
result of a GSM TMSI re-allocation procedure
5.4.2 Cipher switching initiated To ensure interworking with and through the d, f, g
by FT network during ciphering as a result of a GSM
ciphering procedure. If ciphering is incorrectly
supported, interworking will not be possible
5.4.2 Cipher switching initiated To ensure interworking with and through the d, f, g
by PT network during ciphering as a result of a external
handover procedure (implementation dependant). If
ciphering is incorrectly supported, interworking will
not be possible
5.4.2 External handover To ensure interworking with and through the e, f, g
network via MSC associated handover when
external handover is supported. If external
handover is incorrectly supported, interworking will
not be possible
5.4.2 Outgoing call request To ensure the terminal can establish an outgoing f, g
(including overlap call covering the GSM CM service procedure and
sending) outgoing call initiation to ensure correct
interworking with the GSM network
5.4.2 Parameter retrieval To ensure the terminal can exchange information d, f
with the network (and vice versa) to support
location update and external handover procedure
5.4.2 Incoming call To ensure the terminal behaves correctly on f, g
receiving an incoming call (invoked by GSM MSC),
to ensure correct interworking with the GSM
network
(continued)
Page 13
TBR 36: May 1998
Table 1 (concluded): Network layer requirements and justifications
ETS 300 370 DESCRIPTION TBR JUSTIFICATION TD Cat
Item
5.4.2 Emergency call To ensure the terminal can establish an emergency f, g
establishment procedure call covering the GSM emergency call procedure to
ensure correct interworking with the GSM network
5.4.2 Accepted call To ensure the terminal behaves correctly during the f
establishment different connection phases of a call establishment,
to ensure correct interworking with the network
(GSM)
5.4.2 Abnormal call release To ensure the terminal behaves correctly during d, e, f
abnormal call release (either PP or GSM initiated),
to ensure correct interworking with the network
(GSM)
5.4.2 Normal call release To ensure the terminal behaves correctly during d, e, f
normal call release (either PP or GSM initiated), to
ensure correct interworking with the network (GSM)
5.4.2 Paging To ensure the terminal behaves correctly on receipt d, f
of a paging message as a result of a GSM paging
procedure
5.4.2 Handling of DTMF To ensure the terminal behaves correctly on d, f
handling of a DTMF signal to ensure correct
interworking with the GSM network.
5.4.2 Notification of progress To ensure the terminal behaves correctly on d, f
and interworking notification of progress as a result of a GSM
progress (or other appropriate) procedure
5.4.2 User notification To ensure the terminal behaves correctly on d, f
handling call related events as a result of a GSM
user notification procedure
5.2 Data Link Control (DLC) layer services
In addition to the requirements for GAP as defined in TBR 22 [25] no DECT/GSM specific requirements
apply.
5.3 Medium Access Control (MAC) layer services
In addition to the requirements for GAP as defined in TBR 22 [25] no DECT/GSM specific requirements
apply.
5.4 Application features
In addition to the requirements for GAP as defined in TBR 22 [25] no DECT/GSM specific requirements
apply.
5.5 PHysical (PH) layer requirements
In addition to the requirements for GAP as defined in TBR 22 [25] no DECT/GSM specific requirements
apply (see note).
NOTE: TBR 22 [25] makes reference to the requirements of TBR 6 [23] and TBR 10 [24].

Page 14
TBR 36: May 1998
6 Test specification
6.1 Portable Part (PP)
This subclause includes lists of the test groups and abstract test cases relevant for DECT/GSM IWP
TBR derived from ETS 300 702-2 [28].
6.1.1 NWK layer
6.1.1.1 Test suite structure
Table 2
TBR 36: Test Suite Structure PP
Suite Name: nwk_pt_gsm
Standards Ref.: ETS 300 370 [9]
Profile ICS Ref.: ETS 300 704-1 [21]
Profile IXIT Ref.: ETS 300 494-2 [27]; ETS 300 702-2 [28]
Test Method: remote
Comments:
Test Group Reference Test Group Objective
PT/ To check the behaviour of the NWK layer of the PT(IUT)
PT/CC/ To check the IUT CC-state machine behaviour
PT/CC/IT/ To check that the IUT CC-state machine provides sufficient conformance for
possible interconnection without trying to perform thorough testing
PT/CC/CA/ Limited testing that the observable capabilities of the CC entity of the IUT are in
accordance with the static conformance requirements and the additional
capabilities claimed in the PROFILE ICS/PROFILE IXIT
PT/CC/BV/ To tests the CC entity of the IUT in response to syntactically and contextual
correct behaviour of the test system
PT/CC/BV/OC/ To check the IUT's behaviour to setup an outgoing call
PT/CC/BV/IC/ To check the IUT's behaviour to setup an incoming call
PT/CC/BV/CI/ To check the IUT's behaviour in information transfer procedures
PT/CC/BV/CR/ To check the IUT's behaviour to release an outgoing/incoming call
PT/CC/BV/HO/ To check the IUT's behaviour to perform an External Handover
PT/MM/ To check the behaviour of the Mobility Management entity of the IUT
PT/MM/IT/ To check that the MM entity of the IUT provides sufficient conformance for
possible interconnection without trying to perform thorough testing
PT/MM/CA/ Limited testing that the observable capabilities of the MM entity of the IUT are in
accordance with the static conformance requirements and the additional
capabilities claimed in the PROFILE ICS/PROFILE IXIT
PT/MM/BV/ To tests the MM entity of the IUT in response to syntactically and contextual
correct behaviour of the test system
PT/MM/BV/ID/ To check the IUT's behaviour concerning identity procedures
PT/MM/BV/AU/ To check the IUT's behaviour concerning the authentication procedures
PT/MM/BV/LO/ To check the IUT's behaviour concerning the location procedures
PT/MM/BV/CH/ To check the IUT's behaviour concerning the ciphering related procedures
(continued)
Page 15
TBR 36: May 1998
Table 2 (concluded)
TBR 36: Test Suite Structure PP
Test Group Reference Test Group Objective
PT/ME/ To check the behaviour of the LLME of the IUT
PT/ME/IT/ To check that LLME of the IUT provides sufficient conformance for possible
interconnection without trying to perform thorough testing
PT/ME/CA/ Limited testing that the observable capabilities of the LLME of the IUT are in
accordance with the static conformance requirements and the additional
capabilities claimed in the PROFILE ICS/PROFILE IXIT
PT/ME/BV/ To tests the LLME of the IUT in response to syntactically and contextual correct
behaviour of the test system
PT/LC/ To check the behaviour of the LCE of the IUT
PT/LC/IT/ To check that LCE of the IUT provides sufficient conformance for possible
interconnection without trying to perform thorough testing
PT/LC/CA/ Limited testing that the observable capabilities of the LCE of the IUT are in
accordance with the static conformance requirements and the additional
capabilities claimed in the PROFILE ICS/PROFILE IXIT
PT/LC/BV/ To tests the LCE of the IUT in response to syntactically and contextual correct
behaviour of the test system
PT/LC/BV/LE/ To check the IUT's behaviour concerning the connection oriented link
establishment procedures
Detailed Comments:
1. The sub-sub-groups with identifiers PT/xx/IT/ and PT/xx/CA/ do not include their own test
cases but only list an appropriate selection of tests from the relevant sub-group with identifier
PT/xx/.
6.1.1.2 Test case index
Table 3
TBR 36: Test Case Index
Test Group Test Case Id Description
Reference
PT/CC/BV/OC/ TC_PT_CC_BV_OC_21 Outgoing call with IPUI; T-00, T-01, T-02, T-03, T-04,
T-10; piece wise or en-block dialling
TC_PT_CC_BV_OC_22 Outgoing emergency call; T-00, T-01, T-02, T-03, T-04,
T-10; piece wise or en-block dialling
TC_PT_CC_BV_OC_23 Outgoing call with TPUI; T-00, T-01, T-02, T-03, T-04,
T-10; piece wise or en-block dialling
PT/CC/BV/IC/ TC_PT_CC_BV_IC_21 Incoming call; T-00, T-06, (T-07), T-08, T-10;
<> in {CC-INFO}
TC_PT_CC_BV_IC_22 Incoming call; T-00, T-06, (T-07), T-08, T-10;
<> in {CC-SETUP}
PT/CC/BV/CI/ TC_PT_CC_BV_CI_21 Go to DTMF invocation in T-10; infinite tone length;
Acknowledge from FT (MSC)
TC_PT_CC_BV_CI_22 Go to DTMF invocation in T-10; infinite tone length;
Rejection from FT (MSC)
TC_PT_CC_BV_CI_23 Cancel DTMF tone in T-10; Acknowledge from FT
(MSC)
(continued)
Page 16
TBR 36: May 1998
Table 3 (concluded)
TBR 36: Test Case Index
Test Group Test Case Id Description
Reference
PT/CC/BV/CR/ TC_PT_CC_BV_CR_21 Outgoing normal call; T-01; FT (PLMN) initiated
abnormal release (reason: "Unknown identity")
TC_PT_CC_BV_CR_22 Outgoing normal call; T-01; FT (PLMN) initiated
abnormal release (reason: "Invalid identity")
TC_PT_CC_BV_CR_23 Outgoing normal call; T-02; FT (PLMN) initiated normal
release (reason: "Unknown identity")
TC_PT_CC_BV_CR_24 Outgoing normal call; T-02; FT (PLMN) initiated normal
release (reason: "Invalid identity")
PT/CC/BV/HO/ TC_PT_CC_BV_HO_01 External Handover; T-10; Handover Complete to MSC
TC_PT_CC_BV_HO_02 External Handover; T-10; Handover Reject by PP
TC_PT_CC_BV_HO_03 External Handover; T-10; Handover Reject by FP-1
TC_PT_CC_BV_HO_04 External Handover; T-10; Handover Reject by MSC
PT/MM/BV/ID/ TC_PT_MM_BV_ID_21 Identity request; IPUI type requested; IPUI (IMSI)
returned
TC_PT_MM_BV_ID_22 Identity request; IPEI type requested; IPEI returned
TC_PT_MM_BV_ID_23 Identity request; TMSI type requested; TMSI returned
TC_PT_MM_BV_ID_24 Temporary identity assign procedure (invoked by MSC)
PT/MM/BV/AU/ TC_PT_MM_BV_AU_20 Authentication of PT (invoked by MSC); Storage of
DCK
TC_PT_MM_BV_AU_21 Authentication of PT (invoked by MSC); MSC rejection
PT/MM/BV/LO/ TC_PT_MM_BV_LO_20 No CC activities; power off; power on; Location
registration request (no TPUI but TMSI assignment)
TC_PT_MM_BV_LO_21 No CC activities; power off; power on; Location
registration request (TPUI and TMSI assignment)
TC_PT_MM_BV_LO_22 Location registration after change of DECT (not GSM)
location area; TPUI assignment
TC_PT_MM_BV_LO_23 Location registration after change of DECT and GSM
location area; TPUI and TMSI assignment
TC_PT_MM_BV_LO_27 Location registration; reject with reason: "IPUI
unknown"
TC_PT_MM_BV_LO_28 Location registration; reject with reason: "IPUI not
accepted"
TC_PT_MM_BV_LO_29 Location registration; reject with reason: "PLMN not
allowed"
TC_PT_MM_BV_LO_30 Location registration; reject with reason: "Location area
not allowed"
TC_PT_MM_BV_LO_31 Location registration after change of DECT (not GSM)
location area; TPUI assignment; new location
registration with TPUI
PT/MM/BV/CH/ TC_PT_MM_BV_CH_06 Cipher switching; FT (MSC) initiated; "cipher-off" to
"cipher-on"
TC_PT_MM_BV_CH_07 Cipher switching; FT (MSC) initiated; "cipher-on" to
"cipher-off"
PT/ME/BV/ TC_PT_ME_BV_20 Outgoing call; T-01; Cipher switching FT (MSC)
initiated performed before answering the setup request
TC_PT_ME_BV_21 Outgoing call; T-01; GSM CM service procedure and
Cipher switching FT (MSC) initiated performed before
answering the setup request
PT/LC/BV/LE/ TC_PT_LC_BV_LE_03 Indirect FT initiated link establishment; Page response
with IPUI
TC_PT_LC_BV_LE_04 Indirect FT initiated link establishment; Page response
with TPUI
Detailed Comments:
1. The PT is the IUT.
Page 17
TBR 36: May 1998
6.1.2 DLC layer
No relevant test groups and abstract test cases exist.
6.1.3 MAC layer
No relevant test groups and abstract test cases exist.
6.1.4 PH layer
No relevant test groups and abstract test cases exist.
6.2 Fixed Part (FP)
This subclause includes lists of the test groups and abstract test cases relevant for DECT/GSM IWP
TBR derived from ETS 300 702-3 [29].
This subclause shall apply only if the DECT FP is a terminal equipment connected to a public network
interface. If the DECT FP is a part of the network (i.e. functionally attached to the GSM MSC) and is
therefore not considered to be a terminal equipment this TBR shall not apply (see clause 1).

Page 18
TBR 36: May 1998
6.2.1 NWK layer
6.2.1.1 Test suite structure
Table 4
TBR 36: Test Suite Structure FP
Suite Name: nwk_ft_gsm
Standards Ref.: ETS 300 370 [9]
Profile ICS Ref.: ETS 300 704-2 [22]
Profile IXIT Ref.: ETS 300 702-3 [29]
Test Method: remote
Comments:
Test Group Reference Test Group Objective
FT/ To check the behaviour of the NWK layer of the FT(IUT)
FT/CC/ To check the IUT CC-state machine behaviour
FT/CC/IT/ To check that the IUT CC-state machine provides sufficient conformance for
possible interconnection without trying to perform thorough testing
FT/CC/CA/ Limited testing that the observable capabilities of the CC entity of the IUT are in
accordance with the static conformance requirements and the additional
capabilities claimed in the PROFILE ICS/PROFILE IXIT
FT/CC/BV/ To tests the CC entity of the IUT in response to syntactically and contextual
correct behaviour of the test system
FT/CC/BV/OC/ To check the IUT's behaviours to setup an outgoing call
FT/CC/BV/IC/ To check the IUT's behaviours to setup an incoming call
FT/CC/BV/CI/ To check the IUT's behaviours in information transfer procedures
FT/CC/BV/CR/ To check the IUT's behaviours to release an outgoing/incoming call
FT/CC/TI/ To verify that the IUT CC timers are with correct values and the IUT is reacting
properly to the expiry of a timer
FT/MM/ To check the behaviour of the Mobility Management entity of the IUT
FT/MM/IT/ To check that the MM entity of the IUT provides sufficient conformance for
possible interconnection without trying to perform thorough testing
FT/MM/CA/ Limited testing that the observable capabilities of the MM entity of the IUT are in
accordance with the static conformance requirements and the additional
capabilities claimed in the PROFILE ICS/PROFILE IXIT
FT/MM/BV/ To tests the MM entity of the IUT in response to syntactically and contextual
correct behaviour of the test system
FT/MM/BV/ID/ To check the IUT's behaviour concerning identity procedures
FT/MM/BV/AU/ To check the IUT's behaviour concerning the authentication procedures
FT/MM/BV/LO/ To check the IUT's behaviour concerning the location procedures
FT/MM/BV/CH/ To check the IUT's behaviour concerning the ciphering related procedures
(continued)
Page 19
TBR 36: May 1998
Table 4 (concluded)
TBR 36: Test Suite Structure FP
Test Group Reference Test Group Objective
FT/MM/TI/ To verify that the IUT MM timers are with correct values and the IUT is reacting
properly to the expiry of a timer
FT/LC/ To check the behaviour of the LCE of the IUT
FT/LC/IT/ To check that LCE of the IUT provides sufficient conformance for possible
interconnection without trying to perform thorough testing
FT/LC/CA/ Limited testing that the observable capabilities of the LCE of the IUT are in
accordance with the static conformance requirements and the additional
capabilities claimed in the PROFILE ICS/PROFILE IXIT
FT/LC/BV/ To tests the LCE of the IUT in response to syntactically and contextual correct
behaviour of the test system
FT/LC/BV/LE/ To check the IUT's behaviour concerning the connection oriented link
establishment procedures
FT/LC/TI/ To verify that the IUT LCE timers are with correct values and the IUT is reacting
properly to the expiry of a timer
Detailed Comments:
1. The sub-sub-groups with identifiers FT/xx/IT/ and FT/xx/CA/ do not include their own test
cases but only list an appropriate selection of tests from the relevant sub-group with identifier
FT/xx/.
6.2.1.2 Test case index
Table 5
TBR 36: Test Case Index
Test Group Test Case Id Description
Reference
FT/CC/BV/OC/ TC_FT_CC_BV_OC_07 Outgoing normal call; F-00 to F-10; piece-wise dialling
TC_FT_CC_BV_OC_08 Outgoing normal call; F-00 to F-10; en-block dialling in
{CC-SETUP}
TC_FT_CC_BV_OC_09 Emergency call; F-00 to F-10; en-block dialling in {CC-
SETUP}
TC_FT_CC_BV_OC_10 Outgoing normal call; F-00 to F-10; en-block dialling in
{CC-INFO}
TC_FT_CC_BV_OC_11 Outgoing normal call; F-00 to F-10; en-block dialling in
second {CC-INFO}
FT/CC/BV/IC/ TC_FT_CC_BV_IC_03 Incoming call; F-00, F-06, F-07 to F-10
TC_FT_CC_BV_IC_04 Incoming call; F-00, F-06, directly to F-10
FT/CC/BV/CI/ TC_FT_CC_BV_CI_20 Notification of progress and interworking (invoked by
the MSC with a {PROGRESS} msg)
TC_FT_CC_BV_CI_21 User notification (invoked by the MSC with a {NOTIFY}
msg)
TC_FT_CC_BV_CI_22 Go to DTMF invocation in F-10; infinite tone length;
Acknowledge from IUT (MSC)
TC_FT_CC_BV_CI_23 Go to DTMF invocation in F-10; infinite tone length;
Rejection from IUT (MSC)
TC_FT_CC_BV_CI_24 Cancel DTMF tone in F-10; Acknowledge from IUT
(MSC)
(continued)
Page 20
TBR 36: May 1998
Table 5 (continued)
TBR 36: Test Case Index
Test Group Test Case Id Description
Reference
FT/CC/BV/CR/ TC_FT_CC_BV_CR_13 Outgoing normal call; F-02; IUT initiated normal release
(invoked by the MSC)
TC_FT_CC_BV_CR_14 Outgoing normal call; F-10; IUT initiated normal release
(invoked by the MSC)
TC_FT_CC_BV_CR_15 Incoming call; F-10; IUT initiated normal release
(invoked by the MSC)
TC_FT_CC_BV_CR_16 Outgoing normal call; F-02; PT initiated normal release
TC_FT_CC_BV_CR_17 Outgoing normal call; F-10; PT initiated normal release
TC_FT_CC_BV_CR_18 Incoming call; F-07; PT initiated normal release
TC_FT_CC_BV_CR_19 Incoming call; F-07; PT initiated abnormal release
TC_FT_CC_BV_CR_20 Outgoing normal call; F-10; PT initiated abnormal
release
TC_FT_CC_BV_CR_21 Incoming call; F-06; PT initiated abnormal release
TC_FT_CC_BV_CR_22 Outgoing normal call; F-02; IUT initiated abnormal
release (invoked by the MSC)
TC_FT_CC_BV_CR_23 Outgoing normal call; F-10; IUT initiated abnormal
release (invoked by the MSC)
TC_FT_CC_BV_CR_24 Incoming call; F-07; IUT initiated abnormal release
(invoked by the MSC)
TC_FT_CC_BV_CR_25 Outgoing normal call; F-02; IUT initiated abnormal
release (invoked by the MSC) after SETUP msg to
MSC
TC_FT_CC_BV_CR_26 Outgoing normal call; F-02; IUT initiated abnormal
release (invoked by the MSC) after unsuccessful CM
Service procedure
FT/CC/TI/ TC_FT_CC_TI_05 Outgoing call; F-02; timer F- expiry (± 5 %
margin); IUT sends {CC-RELEASE}
TC_FT_CC_TI_06 Outgoing call; F-02; restart of timer F- on
receipt of {CC-INFO}
TC_FT_CC_TI_07 Outgoing call; F-19; timer F- expiry (± 5 %
margin); IUT sends {CC-RELEASE-COM}
TC_FT_CC_TI_08 Outgoing call; F-06; timer F- expiry (± 5 %
margin); IUT sends {CC-RELEASE-COM}
FT/MM/BV/ID/ TC_FT_MM_BV_ID_05 Identity request procedure; IUT (MSC) initiated (with
IMSI)
TC_FT_MM_BV_ID_06 Identity request procedure; IUT (MSC) initiated (with
IMEI)
TC_FT_MM_BV_ID_07 Identity request procedure; IUT (MSC) initiated (with
TMSI)
TC_FT_MM_BV_ID_08 Temporary identity assign
...