oSIST prEN ISO 10513:2024
(Main)Fasteners - Prevailing torque hexagon nuts - High nuts (all metal), with fine pitch thread (ISO/DIS 10513:2024)
Fasteners - Prevailing torque hexagon nuts - High nuts (all metal), with fine pitch thread (ISO/DIS 10513:2024)
ISO 10513:2012 specifies the characteristics of prevailing torque type all-metal hexagon high nuts with metric fine pitch thread with nominal thread diameters, D, from 8 mm up to and including 36 mm, in product grade A for diameter sizes up to and including 16 mm and product grade B for diameter sizes above 16 mm, and with property classes 8, 10 and 12.
Verbindungselemente - Sechskantmuttern mit Klemmteil - Hohe Muttern (Ganzmetallmuttern), mit Feingewinde (ISO/DIS 10513:2024)
Fixations - Écrous hexagonaux autofreinés - Écrous hauts (tout métal), à pas fin (ISO/DIS 10513:2024)
L'ISO 10513:2012 spécifie les caractéristiques des écrous hexagonaux hauts autofreinés tout métal à filetage métrique à pas fin, de diamètre nominal de filetage D de 8 mm à 36 mm inclus, de grade A pour les diamètres D jusqu'à 16 mm et de grade B pour les diamètres D supérieurs à 16 mm, et de classes de qualité 8, 10 et 12.
Vezni elementi - Šestrobe zaščitne matice - Visoke matice (vse kovine) z drobnim navojem (ISO/DIS 10513:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 10513:2024
01-julij-2024
Nadomešča:
SIST EN ISO 10513:2013
Vezni elementi - Šestrobe zaščitne matice - Visoke matice (vse kovine) z drobnim
navojem (ISO/DIS 10513:2024)
Fasteners - Prevailing torque hexagon nuts - High nuts (all metal), with fine pitch thread
(ISO/DIS 10513:2024)
Verbindungselemente - Sechskantmuttern mit Klemmteil - Hohe Muttern
(Ganzmetallmuttern), mit Feingewinde (ISO/DIS 10513:2024)
Fixations - Écrous hexagonaux autofreinés - Écrous hauts (tout métal), à pas fin
(ISO/DIS 10513:2024)
Ta slovenski standard je istoveten z: prEN ISO 10513
ICS:
21.040.10 Metrski navoji Metric screw threads
21.060.20 Matice Nuts
oSIST prEN ISO 10513:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 10513:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 10513:2024
DRAFT
International
Standard
ISO/DIS 10513
ISO/TC 2/SC 12
Fasteners — Prevailing torque
Secretariat: DIN
hexagon nuts — High nuts (all
Voting begins on:
metal), with fine pitch thread
2024-06-06
Fixations — Écrous hexagonaux autofreinés — Écrous hauts
Voting terminates on:
(tout métal), à pas fin
2024-08-29
ICS: 21.060.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 10513:2024(en)
© ISO 2024
---------------------- Page: 3 ----------------------
oSIST prEN ISO 10513:2024
DRAFT
ISO/DIS 10513:2024(en)
International
Standard
ISO/DIS 10513
ISO/TC 2/SC 12
Fasteners — Prevailing torque
Secretariat: DIN
hexagon nuts — High nuts (all
Voting begins on:
metal), with fine pitch thread
Fixations — Écrous hexagonaux autofreinés — Écrous hauts
Voting terminates on:
(tout métal), à pas fin
ICS: 21.060.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 10513:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii
---------------------- Page: 4 ----------------------
oSIST prEN ISO 10513:2024
ISO/DIS 10513:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.