SIST EN ISO 22570:2020
(Main)Dentistry - Spoons and bone curettes (ISO 22570:2020)
Dentistry - Spoons and bone curettes (ISO 22570:2020)
This document specifies requirements and test methods for spoons and bone curettes used in dentistry for oral surgical procedures.
It specifies shapes and dimensions as well as information for marking.
Zahnheilkunde - Löffel und Knochenküretten (ISO 22570:2020)
Dieses Dokument legt Anforderungen und Prüfverfahren für Löffel und Knochenküretten, die in der Zahnheilkunde für chirurgische Eingriffe im Mund verwendet werden, fest.
Es legt Formen und Maße sowie Angaben zur Kennzeichnung fest.
Médecine bucco-dentaire - Curette Lucas (ISO 22570:2020)
Le présent document spécifie les exigences et les méthodes d'essai applicables aux cuillères et curettes à os utilisées en médecine bucco-dentaire pour les opérations chirurgicales dans la cavité buccale.
Il spécifie les formes et les dimensions ainsi que les informations de marquage.
Zobozdravstvo - Kirete "Lucas" (ISO 22570:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22570:2020
01-maj-2020
Zobozdravstvo - Kirete "Lucas" (ISO 22570:2020)
Dentistry - Spoons and bone curettes (ISO 22570:2020)
Zahnheilkunde - Löffel und Knochenküretten (ISO 22570:2020)
Médecine bucco-dentaire - Curette Lucas (ISO 22570:2020)
Ta slovenski standard je istoveten z: EN ISO 22570:2020
ICS:
11.060.20 Zobotehnična oprema Dental equipment
SIST EN ISO 22570:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22570:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 22570:2020
EN ISO 22570
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2020
EUROPÄISCHE NORM
ICS 11.060.20
English Version
Dentistry - Spoons and bone curettes (ISO 22570:2020)
Médecine bucco-dentaire - Cuillères et curettes à os Zahnheilkunde - Löffel und Knochenküretten (ISO
(ISO 22570:2020) 22570:2020)
This European Standard was approved by CEN on 13 February 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22570:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 22570:2020
EN ISO 22570:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 22570:2020
EN ISO 22570:2020 (E)
European foreword
This document (EN ISO 22570:2020) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2020, and conflicting national standards
shall be withdrawn at the latest by September 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22570:2020 has been approved by CEN as EN ISO 22570:2020 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 22570:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 22570:2020
INTERNATIONAL ISO
STANDARD 22570
First edition
2020-02
Dentistry — Spoons and bone curettes
Médecine bucco-dentaire — Cuillères et curettes à os
Reference number
ISO 22570:2020(E)
©
ISO 2020
---------------------- Page: 7 ----------------------
SIST EN ISO 22570:2020
ISO 22570:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 22570:2020
ISO 22570:2020(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Requirements . 2
5.1 Dimensions . 2
5.2 Materials . 4
5.3 Handle. 4
5.4 Working end . 4
5.5 Surface finish . 5
5.6 Resistance to reprocessing . 5
6 Measurement and test methods . 5
6.1 Visual inspection . 5
6.2 Dimensions . 5
6.3 Resistance to reprocessing . 5
7 Marking, labelling and instructions for use . 5
7.1 Marking on the instrument . 5
7.2 Labelling on the package . 6
7.3 Instructions for use . 6
Bibliography . 7
© ISO 2020 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 22570:2020
ISO 22570:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of pate
...
SLOVENSKI STANDARD
oSIST prEN ISO 22570:2019
01-april-2019
Zobozdravstvo - Kirete "Lucas" (ISO/DIS 22570:2019)
Dentistry - Spoons and bone curettes (ISO/DIS 22570:2019)
Zahnheilkunde - Löffel und Knochenküretten (ISO/DIS 22570:2019)
Médecine bucco-dentaire - Curette Lucas (ISO/DIS 22570:2019)
Ta slovenski standard je istoveten z: prEN ISO 22570
ICS:
11.060.20 =RERWHKQLþQDRSUHPD Dental equipment
oSIST prEN ISO 22570:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 22570:2019
---------------------- Page: 2 ----------------------
oSIST prEN ISO 22570:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 22570
ISO/TC 106/SC 4 Secretariat: DIN
Voting begins on: Voting terminates on:
2019-01-31 2019-04-25
Dentistry — Spoons and bone curettes
Médecine bucco-dentaire — Curette Lucas
ICS: 11.060.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 22570:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019
---------------------- Page: 3 ----------------------
oSIST prEN ISO 22570:2019
ISO/DIS 22570:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 22570:2019
ISO/DIS 22570:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Requirements . 2
5.1 Dimensions . 2
5.2 Materials . 4
5.3 Handle. 4
5.4 Working end . 4
5.5 Surface finish . 5
5.6 Resistance to reprocessing . 5
6 Measurement and test methods . 5
6.1 Visual inspection . 5
6.2 Dimensions . 5
6.3 Resistance to reprocessing . 5
7 Marking, labelling and instructions for use . 6
7.1 Marking on the instrument . 6
7.2 Labelling on the package . 6
7.3 Instructions for use . 6
© ISO 2019 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 22570:2019
ISO/DIS 22570:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 4, Dental
instruments.
iv © ISO 2019 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 22570:2019
DRAFT INTERNATIONAL STANDARD ISO/DIS 22570:2019(E)
Dentistry — Spoons and bone curettes
1 Scope
This document specifies requirements and test methods for spoons and bone curettes used in dentistry
for oral surgical procedures.
It specifies shapes and dimensions as well as information for marking.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitute
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.