Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO/FDIS 13000-1:2021)

Kunststoffe - Polytetrafluorethylen(PTFE)-Halbzeuge - Teil 1: Anforderungen und Bezeichnung (ISO/FDIS 13000-1:2021)

Dieser Teil von ISO 13000 legt Anforderungen an verarbeitete, ungefüllte Polytetrafluorethylen(PTFE)-Produkte, die in verschiedenen Formen vorliegen können, sowie ein System zu deren Bezeichnung fest. Das zur Herstellung von PTFE-Halbzeug verwendete PTFE wird in ISO 20568-1 beschrieben und darf nach ISO 20568-1 bis zu 1 % eines Comonomers enthalten. Bei dem zur Herstellung von Halbzeug verwendeten PTFE kann es sich um virginales oder wiederverarbeitetes Harz handeln. Der Zusatz von Pigmenten oder Farbstoffen ist bis zu einem Massenanteil von 1,5 % zulässig. Hinsichtlich der Zugfestigkeit und Bruchdehnung sind in diesem Teil von ISO 13000 fünf verschiedene Klassen vorgesehen. Das Halbzeug kann ohne Nachbehandlung (Typ P) oder maßstabilisiert sein (Typ S) und darf festgelegte elektrische Eigenschaften oder andere Eigenschaften aufweisen, sofern sie für eine bestimmte Anwendung vorgeschrieben sind.
ANMERKUNG Zur Information sind in Anhang A Verweisungen auf andere Normen für Halbzeuge aus Polytetrafluorethylen angegeben.

Plastiques - Semi-produits en polytétrafluoroéthylène (PTFE) - Partie 1: Spécifications et désignation (ISO/FDIS 13000-1:2021)

Polimerni materiali - Polizdelki iz politetrafluoroetilena (PTFE) - 1. del: Zahteve in označevanje (ISO/FDIS 13000-1:2021)

General Information

Status
Not Published
Public Enquiry End Date
24-Sep-2020
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Sep-2021
Due Date
14-Nov-2021

RELATIONS

Buy Standard

Draft
oSIST prEN ISO 13000-1:2020
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN ISO 13000-1:2020
01-september-2020

Polimerni materiali - Polizdelki iz politetrafluoroetilena (PTFE) - 1. del: Zahteve in

označevanje (ISO/DIS 13000-1:2020)

Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements

and designation (ISO/DIS 13000-1:2020)
Kunststoffe - Polytetrafluorethylen(PTFE)-Halbzeuge - Teil 1: Anforderungen und
Bezeichnung (ISO/DIS 13000-1:2020)

Plastiques - Semi-produits en polytétrafluoroéthylène (PTFE) - Partie 1: Spécifications et

désignation (ISO/DIS 13000-1:2020)
Ta slovenski standard je istoveten z: prEN ISO 13000-1
ICS:
83.140.01 Izdelki iz gume in polimernih Rubber and plastics products
materialov na splošno in general
oSIST prEN ISO 13000-1:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13000-1:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 13000-1:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13000-1
ISO/TC 61/SC 9 Secretariat: KATS
Voting begins on: Voting terminates on:
2020-07-03  2020-09-25
Plastics — Polytetrafluoroethylene (PTFE) semi-finished
products —
Part 1:
Requirements and designation
Plastiques — Semi-produits en polytétrafluoroéthylène (PTFE) —
Partie 1: Spécifications et désignation
ICS: 83.140.01
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 13000-1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 13000-1:2020
ISO/DIS 13000-1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 13000-1:2020
ISO/DIS 13000-1:2020(E)
Contents  Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2  Normative references ...................................................................................................................................................................................... 1

3  Terms and definitions ..................................................................................................................................................................................... 1

3.1 Abbreviated terms and symbols .............................................................................................................................................. 2

4  Requirements for PTFE semi-finished products ................................................................................................................. 2

4.1 General ........................................................................................................................................................................................................... 2

4.2 Dimensions and dimensional tolerances ......................................................................................................................... 2

4.2.1 General...................................................................................................................................................................................... 2

4.2.2 Skived tape, skived sheet, or film .................. ..................................................................................................... 2

4.2.3 Moulded sheet .................................................................................................................................................................... 2

4.2.4 Extruded or moulded rod ......................................................................................................................................... 3

4.2.5 Tube extruded from coagulated dispersion powder ........................................................................ 3

4.2.6 Extruded or moulded heavy-walled tube ................................................................................................... 3

4.3 Tensile strength and percentage elongation at break ........................................................................................... 4

4.4 Dimensional stability ......................................................................................................................................................................... 4

4.5 Density ........................................................................................................................................................................................................... 4

4.6 Hardness ....................................................................................................................................................................................................... 4

4.7 Colour .............................................................................................................................................................................................................. 4

4.8 Dielectric strength (DS) ................................................................................................................................................................... 5

4.8.1 General...................................................................................................................................................................................... 5

4.8.2 Skived tape, skived sheet, or film .................. ..................................................................................................... 5

4.8.3 Moulded sheet .................................................................................................................................................................... 5

4.8.4 Moulded basic shape .................................................................................................................................................... 5

4.8.5 Extruded or moulded rod ......................................................................................................................................... 6

4.8.6 Tube extruded from coagulated dispersion powder ........................................................................ 6

4.8.7 Extruded or moulded heavy-walled tube ................................................................................................... 6

4.9 Requirements that may be specified depending on the specific application .................................... 7

5  Format for presenting a designation ...............................................................................................................................................7

5.1 General ........................................................................................................................................................................................................... 7

5.2 Order of presenting codes ............................................................................................................................................................. 7

5.3 Examples of coding a designation .......................................................................................................................................... 8

Annex A (informative) Other standards relating to semi-finished products of

polytetrafluoroethylene ................................................................................................................................................................................ 9

© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 13000-1:2020
ISO/DIS 13000-1:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International

Standards adopted by the technical committees are circulated to the member bodies for voting.

Publication as an International Standard requires approval by at least 75 % of the member bodies

casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 13000-1 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 9,

Thermoplastic materials.

This third edition cancels and replaces the second edition (ISO 13000-1: 2005), which has been

technically revised.

ISO 13000 consists of the following parts, under the general title Plastics — Polytetrafluoroethylene

(PTFE) semi-finished products:
— Part 1: Requirements and designation
— Part 2: Preparation of test specimens and determination of properties
iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 13000-1:2020
DRAFT INTERNATIONAL STANDARD  ISO/DIS 13000-1:2020(E)
Plastics — Polytetrafluoroethylene (PTFE) semi-finished
products —
Part 1:
Requirements and designation
1 Scope

This part of ISO 13000 specifies the requirements and establishes a system of designation for processed

unfilled polytetrafluoroethylene (PTFE) products, which may occur in several forms. The PTFE used

to make the semi-finished product is described in ISO 20568-1 and, as provided in ISO 20568-1, may

contain up to 1 % of a comonomer. The PTFE used to make the semi-finished product may be virgin,

reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant is permitted.

This part of ISO 13000 allows for five grades based on tensile strength and elongation at break. The

semi-finished products can be as-processed (type P) or dimensionally stabilized (type S) and may also

have specified electrical properties or other properties when they are required for an application.

NOTE References to other standards for semi-finished products made from polytetrafluoroethylene are

listed in Annex A for information.
2  Normative references

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.
ISO 472, Plastics — Vocabulary

ISO 1043-1, Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special

characteristics

ISO 20568-1, Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1:

Designation system and basis for specifications

ISO 13000-2, Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 2: Preparation of

test specimens and determination of properties
3  Terms and definitions

For the purposes of this part of ISO 13000, the terms and definitions given in ISO 472 and ISO 20568-1

and the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
moulded basic shape

〈PTFE〉 semi-finished product made by preforming and sintering without additional processing

© ISO 2020 – All rights reserved 1
---------------------- Page: 7 ----------------------
oSIST prEN ISO 13000-1:2020
ISO/DIS 13000-1:2020(E)
3.2
semi-finished product

material, in the form of skived tape, sheets, rods, tubes, tubing, moulded basic shapes or special

shapes, that is produced for use either directly without further fabrication or in fabricating end use

products, or both
3.3
skived tape
film or sheet prepared by cutting, slicing or shaving
Note 1 to entry: The term “veneered tape” is deprecated.
3.1  Abbreviated terms and symbols

The abbreviated terms given in ISO 1043-1 are applicable to this part of ISO 13000.

4  Requirements for PTFE semi-finished products
4.1  General

After considering the specific shape, dimensions and dimensional tolerances, the primary basis for

designating a semi-finished product of PTFE is the tensile strength and percentage elongation at

break of the product. Tests to determine the values for designation shall be run in accordance with

the methods in ISO 13000-2. The semi-finished product is identified as “type P” for as-processed or

“type S” for stabilized and also may be designated as “type E” with specified electrical properties when

requi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.