EN ISO 13000-1:2021

Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021)

This document establishes a system of designation for processed unfilled polytetrafluoroethylene (PTFE) products, which can occur in several forms.
The PTFE used to make the semi-finished product is described in ISO 20568-1. The PTFE used to make the semi-finished product are virgin, reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant can be used.

Kunststoffe - Polytetrafluorethylen (PTFE)-Halbzeuge - Teil 1: Anforderungen und Bezeichnung (ISO 13000-1:2021)

Dieses Dokument legt ein System zur Bezeichnung von verarbeiteten, ungefüllten Polytetrafluor-ethylen (PTFE)-Produkten fest, die in verschiedenen Formen vorliegen können.
Das zur Herstellung von Halbzeug verwendete PTFE ist in ISO 20568 1 beschrieben. Bei dem zur Herstellung von Halbzeug verwendeten PTFE handelt es sich um neues, wiederaufbereitetes oder recyceltes Harz. Der Zusatz von Pigmenten oder Farbstoffen bis zu einem Massenanteil von 1,5 % kann verwendet werden.

Plastiques - Semi-produits en polytétrafluoroéthylène (PTFE) - Partie 1: Spécifications et désignation (ISO 13000-1:2021)

Le présent document établit un système de désignation des produits en polytétrafluoroéthylène (PTFE) mis en œuvre et non chargés qui peuvent se présenter sous diverses formes.
Le PTFE utilisé pour fabriquer le semi-produit est décrit dans l’ISO 20568-1. Le PTFE utilisé pour fabriquer le semi-produit peut être une résine vierge, retraitée ou recyclée. Il est permis d’ajouter jusqu’à 1,5 % en masse de pigment ou de colorant.

Polimerni materiali - Polizdelki iz politetrafluoroetilena (PTFE) - 1. del: Zahteve in označevanje (ISO 13000-1:2021)

General Information

• Status: Published
• Publication Date: 31-Aug-2021
• Withdrawal Date: 30-Mar-2022
• ICS: 83.140.01 - Rubber and plastics products in general
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Sep-2021
• Completion Date: 01-Sep-2021
• Ref Project: SIST EN ISO 13000-1:2021 - Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021)

Relations

• Replaces: EN ISO 13000-1:2005 - Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2005)
• Effective Date: 15-Jan-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13000-1:2021
01-november-2021
Nadomešča:
SIST EN ISO 13000-1:2006
Polimerni materiali - Polizdelki iz politetrafluoroetilena (PTFE) - 1. del: Zahteve in
označevanje (ISO 13000-1:2021)
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements
and designation (ISO 13000-1:2021)
Kunststoffe - Polytetrafluorethylen(PTFE)-Halbzeuge - Teil 1: Anforderungen und
Bezeichnung (ISO 13000-1:2021)
Plastiques - Semi-produits en polytétrafluoroéthylène (PTFE) - Partie 1: Spécifications et
désignation (ISO 13000-1:2021)
Ta slovenski standard je istoveten z: EN ISO 13000-1:2021
ICS:
83.140.01 Izdelki iz gume in polimernih Rubber and plastics products
materialov na splošno in general
SIST EN ISO 13000-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13000-1:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 13000-1:2021


EN ISO 13000-1
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2021
EUROPÄISCHE NORM
ICS 83.140.01 Supersedes EN ISO 13000-1:2005
English Version

Plastics - Polytetrafluoroethylene (PTFE) semi-finished
products - Part 1: Requirements and designation (ISO
13000-1:2021)
Plastiques - Semi-produits en polytétrafluoroéthylène Kunststoffe - Polytetrafluorethylen(PTFE)-Halbzeuge -
(PTFE) - Partie 1: Spécifications et désignation (ISO Teil 1: Anforderungen und Bezeichnung (ISO 13000-
13000-1:2021) 1:2021)
This European Standard was approved by CEN on 15 August 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13000-1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 13000-1:2021
EN ISO 13000-1:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 13000-1:2021
EN ISO 13000-1:2021 (E)
European foreword
This document (EN ISO 13000-1:2021) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2022, and conflicting national standards shall
be withdrawn at the latest by March 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13000-1:2005.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 13000-1:2021 has been approved by CEN as EN ISO 13000-1:2021 without a
...