SIST ES 202 504-16 V1.1.1:2008

• Abstract:

  New ParlayX specification to cover Geocoding, based on requirements in ES 201 988-4, corresponding to 3GPP TS 29.199-16 Rel-7. The present document is part 16 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).; The OSA specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the OSA APIs.; The present document specifies the Geocoding Web Service. The following are defined here:; • Name spaces.; • Sequence diagrams.; • Data definitions.; • Interface specification plus detailed method descriptions.; • Fault definitions.; • Service Policies.; • WSDL Description of the interfaces.

• Status: Published
• Publication Date: 02-Jul-2008
• ICS: 35.100.01 - Open systems interconnection in general
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Jun-2008
• Due Date: 18-Aug-2008
• Completion Date: 03-Jul-2008
• Ref Project: ETSI ES 202 504-16 V1.1.1 (2008-05) - Open Service Access (OSA); Parlay X Web Services; Part 16: Geocoding (Parlay X 3)

SIST ES 202 504-16 V1.1.1:2008 is the ETSI Parlay X Web Services standard for the Geocoding service in Open Service Access (OSA). It specifies a Stage 3 web service interface that lets an application request a terminal’s location address, request addresses for a group of terminals, and calculate the distance between a terminal and a given address.

The standard is aimed at developers and implementers of Parlay X applications, gateways, and location-enabled network services. In practice, it defines the service operations, XML data types, faults, service policies, and the WSDL needed to implement the Geocoding Web Service.

What does SIST ES 202 504-16 V1.1.1:2008 specify?

SIST ES 202 504-16 V1.1.1:2008 specifies the Parlay X 3 Geocoding Web Service as part 16 of the OSA Parlay X 3 Web Services set. It is organized into clauses for scope, references, definitions, service description, namespaces, sequence diagrams, XML Schema data types, web service interface definition, fault definitions, and service policies.

The document describes how a Parlay X application can work with location addresses rather than only raw coordinates. It also shows the service architecture, where the Parlay X Gateway exchanges location data with GMLC/MPC using OMA/MLP and with an addressing server using OpenLS/XML.

Annex	What it covers
Annex A	Normative WSDL for the Geocoding interface
Annex B	Informative bibliography

What are the key requirements of SIST ES 202 504-16 V1.1.1:2008?

The core of SIST ES 202 504-16 V1.1.1:2008 is the TerminalAddress interface and its three operations. These operations are built around request/response exchanges and use accuracy, age, response-time, and tolerance parameters to balance result quality against speed.

The three service operations

• getAddressOfTerminal retrieves the address of a single terminal. If a group URI is used, the service returns POL0006 Groups not allowed.
• getAddressOfTerminalForGroup retrieves addresses for one or more terminals, including group URIs. The response can contain a full or partial set of results, which matters when some terminals are slow or unavailable.
• getTerminalDistanceFromAddress returns the distance in meters between a terminal and a specified address.

Accuracy and timing control

The request messages carry requestedAccuracy, acceptableAccuracy, maximumAge, responseTime, and tolerance. requestedAccuracy sets the preferred location accuracy, while acceptableAccuracy sets the minimum acceptable level. In practice, this lets a client decide whether it wants the fastest answer or the most accurate one.

Delay tolerance

The DelayTolerance enumeration defines NoDelay, LowDelay, and DelayTolerant. These values tell the server whether to favor immediate response, low delay, or better accuracy even if the response takes longer.

Fault handling

The document defines service and policy faults that applications must handle, including SVC0200 Accuracy out of limit, SVC0370 No valid terminal number(s), POL0230 Requested accuracy not supported, and POL0350 Too many terminal numbers. In practice, this is what a client uses to detect invalid inputs, unsupported quality requests, or requests that exceed service limits.

Service policies

Clause 10 defines policy items for MinimumAcceptableAccuracy, GroupSupport, and NestedGroupSupport. These policies tell an implementation or client whether group URIs are allowed and whether nested groups are supported.

What terms does SIST ES 202 504-16 V1.1.1:2008 define?

Geocoding is the transformation of an address description into a normalized location with geographical coordinates.

Reverse geocoding is the transformation of a location into a normalized address description.

Address means a location address made up of country, state, district, city, street, house number, and zip/postal code.

Coordinates are a latitude-longitude pair that identifies a point on Earth.

Terminal number is a string of decimal digits that uniquely identifies a terminal.

GMLC means Gateway Mobile Location Center, a network element involved in terminal location.

MLP means Mobile Location Protocol, the protocol used between the Parlay X Gateway and GMLC/MPC.

OpenLS means Open Location Services, used for the interface between the Parlay X Gateway and the addressing server.

Who uses SIST ES 202 504-16 V1.1.1:2008?

SIST ES 202 504-16 V1.1.1:2008 is used by Parlay X application developers who need location-based functions with standard web service interfaces. It is also used by gateway implementers and service providers that connect application-level requests to mobile network location systems and addressing servers.

The standard is relevant when a service needs to retrieve a terminal’s address, handle a set of terminals, or calculate distance from an address. It is also useful for integration teams that need the WSDL, XML schema types, faults, and service-policy behavior in a controlled interface.

Which standards are used with SIST ES 202 504-16 V1.1.1:2008?

The standard relies on XML Schema Part 2: Datatypes for XML data typing.

It uses ETSI ES 202 504-1 for common Parlay X definitions, shared faults, and the overall OSA framework.

It uses ETSI ES 202 504-9 for accuracy-related definitions and for the shared DelayTolerance context.

It references ISO 3166 for country codes used in AddressInfo.

What does the SIST ES 202 504-16 V1.1.1:2008 document contain?

The document contains sequence diagrams for the three operations, showing the request/response flow and the role of the gateway and location systems. It also contains XML Schema type definitions for AddressInfo, AddressData, and accuracy-related values.

Annex A provides the document/literal WSDL package for implementation. Clause 9 lists the service and policy exceptions with their message IDs, which is useful for software handling and conformance testing. Clause 10 defines the service policy items that an implementation can expose or configure.

Final draft ETSI ES 202 504-16 V1.1.1 (2008-02)
ETSI Standard
Open Service Access (OSA);
Parlay X Web Services;
Part 16: Geocoding
(Parlay X 3)
�
2 Final draft ETSI ES 202 504-16 V1.1.1 (2008-02)

Reference
DES/TISPAN-01034-16-OSA
Keywords
API, OSA, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 Final draft ETSI ES 202 504-16 V1.1.1 (2008-02)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.6
2 References.6
2.1 Normative references.6
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.7
4 Detailed service description .7
5 Namespaces.8
6 Sequence diagrams.9
6.1 Get address of terminal.9
6.2 Get address of terminal for group.10
6.3 Get terminal distance from address .10
7 XML Schema data type definition .11
7.1 Accuracy values.11
7.2 AddressInfo structure.11
7.3 AddressData structure.11
7.4 DelayTolerance enumeration.11
8 Web Service interface definition.12
8.1 Interface: TerminalAddress.12
8.1.1 Operation: getAddressOfTerminal.12
8.1.1.1 Input message: getAddressOfTerminalRequest .12
8.1.1.2 Output message: getAddressOfTerminalResponse .12
8.1.1.3 Referenced Faults.12
8.1.2 Operation: getAddressOfTerminalForGroup.13
8.1.2.1 Input message: getAddressOfTerminalForGroupRequest.13
8.1.2.2 Output message: getAddressOfTerminalForGroupResponse.13
8.1.2.3 Referenced faults.13
8.1.3 Operation: getTerminalDistanceFromAddress.14
8.1.3.1 Input message: GetTerminalDistanceFromAddressRequest.14
8.1.3.2 Output message: GetTerminalDistanceFromAddressResponse.14
8.1.3.3 Referenced faults.14
9 Fault definitions.14
9.1 ServiceException.14
9.1.1 SVC0200: Accuracy out of limit. .14
9.1.2 SVC0370: No valid terminal number(s). .15
9.2 PolicyException.15
9.2.1 POL0230: Requested accuracy not supported. .15
9.2.2 POL0350: Too many terminal numbers.15
10 Service policies .15
Annex A (normative): WSDL for Geocoding .16
Annex B (informative): Bibliography.17
History .18

ETSI
4 Final draft ETSI ES 202 504-16 V1.1.1 (2008-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN), and is now submitted for the ETSI standards
Membership Approval Procedure.
The present document is part 16 of a multi-part deliverable covering Open Service Access (OSA); Parlay X 3 Web
Services, as identified below:
Part 1: "Common";
Part 2: "Third Party Call";
Part 3: "Call Notification";
Part 4: "Short Messaging";
Part 5: "Multimedia Messaging";
Part 6: "Payment";
Part 7: "Account Management";
Part 8: "Terminal Status";
Part 9: "Terminal Location";
Part 10: "Call Handling";
Part 11: "Audio Call";
Part 12: "Multimedia Conference";
Part 13: "Address List Management";
Part 14: "Presence";
Part 15: "Message Broadcast";
Part 16: "Geocoding";
Part 17: "Application-driven Quality of Service (QoS)";
Part 18: "Device Capabilities and Configuration";
Part 19: "Multimedia Streaming Control";
Part 20: "Multimedia Multicast Session Management".
ETSI
5 Final draft ETSI ES 202 504-16 V1.1.1 (2008-02)
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP.
The present document forms part of the Parlay X 3.0 set of specifications.
The present document is equivalent to 3GPP TS 29.199-16 V7.1.2 (Release 7).
ETSI
6 Final draft ETSI ES 202 504-16 V1.1.1 (2008-02)
1 Scope
The present document is part 16 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Geocoding Web Service. The following are defined here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] W3C Recommendation (2 May 2001): "XML Schema Part 2: Datatypes".
NOTE: Available at http://www.w3.org/TR/2001/REC-xmlschema-2-20010502/.
ETSI
7 Final draft ETSI ES 202 504-16 V1.1.1 (2008-02)
[2] ETSI ES 202 504-1: "Open Service Access (OSA); Parlay X Web Services; Part 1: Common
(Parlay X 3)".
[3] ETSI ES 202 504-9: "Open Service Access (OSA); Parlay X Web Services; Part 9: Terminal
Location (Parlay X 3)".
[4] ISO 3166: "Codes for the representation of names of countries and their subdivisions".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 202 504-1 [2] and the following apply.
address: Set of strings that represent address information for a geographical place. It consists of the country, state,
district, city, street, house number and zip/postal code. In this specification, the address means a location address except
where otherwise noted.
coordinates: latitude, longitude pair that identifies a point on the Earth's surface
geocoding: transformation of a description of a address, such as a place name, street address or postal code, into a
normalized description of the location with a geographical coordinates
location: specific set of coordinates
reverse geocoding: transformation of a given location into a normalized description of address
terminal number: string of decimal digits that uniquely identify a terminal
NOTE: Address is a name that is used in both the Geocoding and Terminal Location Web Services. The former
uses address in the customary sense of a location address, while the latter uses it in the sense of a terminal
identifier represented as a URI string. So terminal number is a better name for what Parlay X Terminal
Location calls an address.
3.2 Abbreviations
For the purposes of the present document, the abbreviations defined in ES 202 504-1 [2], ES 202 504-9 [3] and the
following apply:
GMLC Gateway Mobile Location Center
MLP Mobile Location Protocol
MMS Multimedia Message
MPC Mobile Positioning Center
OMA Open Mobile Alliance
OpenLS Open Location Services
URI Uniform Resource Identifier
XML Extensible Markup Language
4 Detailed service description
While the Parlay X Terminal Location Web Service provides access to the geographical coordinates at which a terminal
is located, the Geocoding Web Service provides an additional level of refinement, allowing the s
...

ETSI Standard
Open Service Access (OSA);
Parlay X Web Services;
Part 16: Geocoding
(Parlay X 3)
�
2 ETSI ES 202 504-16 V1.1.1 (2008-05)

Reference
DES/TISPAN-01034-16-OSA
Keywords
API, OSA, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI ES 202 504-16 V1.1.1 (2008-05)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.6
2 References.6
2.1 Normative references.6
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.7
4 Detailed service description .7
5 Namespaces.8
6 Sequence diagrams.9
6.1 Get address of terminal.9
6.2 Get address of terminal for group.10
6.3 Get terminal distance from address .10
7 XML Schema data type definition .11
7.1 Accuracy values.11
7.2 AddressInfo structure.11
7.3 AddressData structure.11
7.4 DelayTolerance enumeration.11
8 Web Service interface definition.12
8.1 Interface: TerminalAddress.12
8.1.1 Operation: getAddressOfTerminal.12
8.1.1.1 Input message: getAddressOfTerminalRequest .12
8.1.1.2 Output message: getAddressOfTerminalResponse .12
8.1.1.3 Referenced Faults.12
8.1.2 Operation: getAddressOfTerminalForGroup.13
8.1.2.1 Input message: getAddressOfTerminalForGroupRequest.13
8.1.2.2 Output message: getAddressOfTerminalForGroupResponse.13
8.1.2.3 Referenced faults.13
8.1.3 Operation: getTerminalDistanceFromAddress.14
8.1.3.1 Input message: GetTerminalDistanceFromAddressRequest.14
8.1.3.2 Output message: GetTerminalDistanceFromAddressResponse.14
8.1.3.3 Referenced faults.14
9 Fault definitions.14
9.1 ServiceException.14
9.1.1 SVC0200: Accuracy out of limit .14
9.1.2 SVC0370: No valid terminal number(s) .15
9.2 PolicyException.15
9.2.1 POL0230: Requested accuracy not supported .15
9.2.2 POL0350: Too many terminal numbers.15
10 Service policies .15
Annex A (normative): WSDL for Geocoding .16
Annex B (informative): Bibliography.17
History .18

ETSI
4 ETSI ES 202 504-16 V1.1.1 (2008-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 16 of a multi-part deliverable covering Open Service Access (OSA); Parlay X 3 Web
Services, as identified below:
Part 1: "Common";
Part 2: "Third Party Call";
Part 3: "Call Notification";
Part 4: "Short Messaging";
Part 5: "Multimedia Messaging";
Part 6: "Payment";
Part 7: "Account Management";
Part 8: "Terminal Status";
Part 9: "Terminal Location";
Part 10: "Call Handling";
Part 11: "Audio Call";
Part 12: "Multimedia Conference";
Part 13: "Address List Management";
Part 14: "Presence";
Part 15: "Message Broadcast";
Part 16: "Geocoding";
Part 17: "Application-driven Quality of Service (QoS)";
Part 18: "Device Capabilities and Configuration";
Part 19: "Multimedia Streaming Control";
Part 20: "Multimedia Multicast Session Management".
ETSI
5 ETSI ES 202 504-16 V1.1.1 (2008-05)
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP.
The present document forms part of the Parlay X 3.0 set of specifications.
The present document is equivalent to 3GPP TS 29.199-16 V7.1.2 (Release 7).
ETSI
6 ETSI ES 202 504-16 V1.1.1 (2008-05)
1 Scope
The present document is part 16 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Geocoding Web Service. The following are defined here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] W3C Recommendation (2 May 2001): "XML Schema Part 2: Datatypes".
NOTE: Available at http://www.w3.org/TR/2001/REC-xmlschema-2-20010502/.
ETSI
7 ETSI ES 202 504-16 V1.1.1 (2008-05)
[2] ETSI ES 202 504-1: "Open Service Access (OSA); Parlay X Web Services; Part 1: Common
(Parlay X 3)".
[3] ETSI ES 202 504-9: "Open Service Access (OSA); Parlay X Web Services; Part 9: Terminal
Location (Parlay X 3)".
[4] ISO 3166: "Codes for the representation of names of countries and their subdivisions".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 202 504-1 [2] and the following apply:
address: Set of strings that represent address information for a geographical place. It consists of the country, state,
district, city, street, house number and zip/postal code. In this specification, the address means a location address except
where otherwise noted.
coordinates: latitude, longitude pair that identifies a point on the Earth's surface
geocoding: transformation of a description of a address, such as a place name, street address or postal code, into a
normalized description of the location with a geographical coordinates
location: specific set of coordinates
reverse geocoding: transformation of a given location into a normalized description of address
terminal number: string of decimal digits that uniquely identify a terminal
NOTE: Address is a name that is used in both the Geocoding and Terminal Location Web Services. The former
uses address in the customary sense of a location address, while the latter uses it in the sense of a terminal
identifier represented as a URI string. So terminal number is a better name for what Parlay X Terminal
Location calls an address.
3.2 Abbreviations
For the purposes of the present document, the abbreviations defined in ES 202 504-1 [2], ES 202 504-9 [3] and the
following apply:
GMLC Gateway Mobile Location Center
MLP Mobile Location Protocol
MMS Multimedia Message
MPC Mobile Positioning Center
OMA Open Mobile Alliance
OpenLS Open Location Services
URI Uniform Resource Identifier
XML Extensible Markup Language
4 Detailed service description
While the Parlay X Terminal Location Web Service provides access to the geographical coordinates at which a terminal
is located, the Geocoding Web Service provides an additional level of refinement, allowing the service developer to
work w
...

SLOVENSKI STANDARD
01-september-2008
Odprti dostop do storitve (OSA) - Spletne storitve Parlay X - 16. del: Geokodiranje
(Parlay X 3)
Open Service Access (OSA) - Parlay X Web Services - Part 16: Geocoding (Parlay X 3)
Ta slovenski standard je istoveten z: ES 202 504-16 Version 1.1.1
ICS:
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

ETSI Standard
Open Service Access (OSA);
Parlay X Web Services;
Part 16: Geocoding
(Parlay X 3)
�
2 ETSI ES 202 504-16 V1.1.1 (2008-05)

Reference
DES/TISPAN-01034-16-OSA
Keywords
API, OSA, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI ES 202 504-16 V1.1.1 (2008-05)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.6
2 References.6
2.1 Normative references.6
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.7
4 Detailed service description .7
5 Namespaces.8
6 Sequence diagrams.9
6.1 Get address of terminal.9
6.2 Get address of terminal for group.10
6.3 Get terminal distance from address .10
7 XML Schema data type definition .11
7.1 Accuracy values.11
7.2 AddressInfo structure.11
7.3 AddressData structure.11
7.4 DelayTolerance enumeration.11
8 Web Service interface definition.12
8.1 Interface: TerminalAddress.12
8.1.1 Operation: getAddressOfTerminal.12
8.1.1.1 Input message: getAddressOfTerminalRequest .12
8.1.1.2 Output message: getAddressOfTerminalResponse .12
8.1.1.3 Referenced Faults.12
8.1.2 Operation: getAddressOfTerminalForGroup.13
8.1.2.1 Input message: getAddressOfTerminalForGroupRequest.13
8.1.2.2 Output message: getAddressOfTerminalForGroupResponse.13
8.1.2.3 Referenced faults.13
8.1.3 Operation: getTerminalDistanceFromAddress.14
8.1.3.1 Input message: GetTerminalDistanceFromAddressRequest.14
8.1.3.2 Output message: GetTerminalDistanceFromAddressResponse.14
8.1.3.3 Referenced faults.14
9 Fault definitions.14
9.1 ServiceException.14
9.1.1 SVC0200: Accuracy out of limit .14
9.1.2 SVC0370: No valid terminal number(s) .15
9.2 PolicyException.15
9.2.1 POL0230: Requested accuracy not supported .15
9.2.2 POL0350: Too many terminal numbers.15
10 Service policies .15
Annex A (normative): WSDL for Geocoding .16
Annex B (informative): Bibliography.17
History .18

ETSI
4 ETSI ES 202 504-16 V1.1.1 (2008-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 16 of a multi-part deliverable covering Open Service Access (OSA); Parlay X 3 Web
Services, as identified below:
Part 1: "Common";
Part 2: "Third Party Call";
Part 3: "Call Notification";
Part 4: "Short Messaging";
Part 5: "Multimedia Messaging";
Part 6: "Payment";
Part 7: "Account Management";
Part 8: "Terminal Status";
Part 9: "Terminal Location";
Part 10: "Call Handling";
Part 11: "Audio Call";
Part 12: "Multimedia Conference";
Part 13: "Address List Management";
Part 14: "Presence";
Part 15: "Message Broadcast";
Part 16: "Geocoding";
Part 17: "Application-driven Quality of Service (QoS)";
Part 18: "Device Capabilities and Configuration";
Part 19: "Multimedia Streaming Control";
Part 20: "Multimedia Multicast Session Management".
ETSI
5 ETSI ES 202 504-16 V1.1.1 (2008-05)
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP.
The present document forms part of the Parlay X 3.0 set of specifications.
The present document is equivalent to 3GPP TS 29.199-16 V7.1.2 (Release 7).
ETSI
6 ETSI ES 202 504-16 V1.1.1 (2008-05)
1 Scope
The present document is part 16 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Geocoding Web Service. The following are defined here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] W3C Recommendation (2 May 2001): "XML Schema Part 2: Datatypes".
NOTE: Available at http://www.w3.org/TR/2001/REC-xmlschema-2-20010502/.
ETSI
7 ETSI ES 202 504-16 V1.1.1 (2008-05)
[2] ETSI ES 202 504-1: "Open Service Access (OSA); Parlay X Web Services; Part 1: Common
(Parlay X 3)".
[3] ETSI ES 202 504-9: "Open Service Access (OSA); Parlay X Web Services; Part 9: Terminal
Location (Parlay X 3)".
[4] ISO 3166: "Codes for the representation of names of countries and their subdivisions".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 202 504-1 [2] and the following apply:
address: Set of strings that represent address information for a geographical place. It consists of the country, state,
district, city, street, house number and zip/postal code. In this specification, the address means a location address except
where otherwise noted.
coordinates: latitude, longitude pair that identifies a point on the Earth's surface
geocoding: transformation of a description of a address, such as a place name, street address or postal code, into a
normalized description of the location with a geographical coordinates
location: specific set of coordinates
reverse geocoding: transformation of a given location into a normalized description of address
terminal number: string of decimal digits that uniquely identify a terminal
NOTE: Address is a name that is used in both the Geocoding and Terminal Location Web Services. The former
uses address in the customary sense of a location address, while the latter uses it in the sense of a terminal
identifier represented as a URI string. So terminal number is a better name for what Parlay X Terminal
Location calls an address.
3.2 Abbreviations
For the purposes of the present document, the abbreviations defined in ES 202 504-1 [2], ES 202 504-9 [3] and the
following apply:
GMLC Gateway Mobile Location Center
MLP Mobile Location Protocol
MMS Multimedia Message
MPC Mobile Positioning Center
OMA Open Mobile Alliance
OpenLS Open Location Services
URI Uniform Resource Identifier
XML Extensible Marku
...