F24.30 - Auditing

SIGNIFICANCE AND USE
4.1 The purpose of this practice is to provide the minimum auditing requirements for audits of amusement rides and devices.  
4.2 An audit can include inspections, evaluations, or examinations during the design, manufacturing, installation, commissioning, operation, or major modification of an amusement ride or device.  
4.3 When audits are performed, they shall occur during the relevant stages of an amusement ride or device’s design, manufacture, installation, commissioning or major modification. This practice does not require recurring design, manufacturing, installation, commissioning, or major modification audits.
SCOPE
1.1 This practice establishes minimum requirements for auditing conformance to ASTM Committee F24 Standards during an audit of an amusement ride or device within a defined scope.  
1.2 Defined scope of audit shall include but not be limited to the following:  
1.2.1 Auditors sufficient relevant education, training, technical knowledge, certifications as appropriate, and experience to properly audit an amusement ride or device in accordance with subsection 5.1 of this standard.  
1.2.2 Visual acuity requirements (if applicable) in accordance with subsection 5.1.3 of this standard.  
1.2.3 Reference standards including published year.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SIGNIFICANCE AND USE
4.1 The purpose of this practice is to provide the minimum auditing requirements for audits of amusement rides and devices.  
4.2 An audit can include inspections, evaluations, or examinations during the design, manufacturing, installation, commissioning, operation, or major modification of an amusement ride or device.  
4.3 When audits are performed, they shall occur during the relevant stages of an amusement ride or device’s design, manufacture, installation, commissioning or major modification. This practice does not require recurring design, manufacturing, installation, commissioning, or major modification audits.
SCOPE
1.1 This practice establishes minimum requirements for auditing conformance to ASTM Committee F24 Standards during an audit of an amusement ride or device within a defined scope.  
1.2 Defined scope of audit shall include but not be limited to the following:  
1.2.1 Auditors sufficient relevant education, training, technical knowledge, certifications as appropriate, and experience to properly audit an amusement ride or device in accordance with subsection 5.1 of this standard.  
1.2.2 Visual acuity requirements (if applicable) in accordance with subsection 5.1.3 of this standard.  
1.2.3 Reference standards including published year.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SIGNIFICANCE AND USE
4.1 The purpose of this practice is to provide the minimum auditing requirements for audits of amusement rides and devices.  
4.2 An audit can include inspections, evaluations, or examinations during the design, manufacturing, installation, commissioning, operation, or major modification of an amusement ride or device.  
4.3 When audits are performed, they shall occur during the relevant stages of an amusement ride or device’s design, manufacture, installation, commissioning or major modification. This practice does not require recurring design, manufacturing, installation, commissioning, or major modification audits.
SCOPE
1.1 This practice establishes minimum requirements for auditing conformance to ASTM Committee F24 Standards during an audit of an amusement ride or device within a defined scope.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SIGNIFICANCE AND USE
4.1 The purpose of this practice is to provide the minimum auditing requirements for audits of amusement rides and devices.  
4.2 An audit can include inspections, evaluations, or examinations during the design, manufacturing, installation, commissioning, operation, or major modification of an amusement ride or device.  
4.3 When audits are performed, they shall occur during the relevant stages of an amusement ride or device’s design, manufacture, installation, commissioning or major modification. This practice does not require recurring design, manufacturing, installation, commissioning, or major modification audits.
SCOPE
1.1 This practice establishes minimum requirements for auditing conformance to ASTM Committee F24 Standards during an audit of an amusement ride or device within a defined scope.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SIGNIFICANCE AND USE
4.1 The purpose of this guide is to establish guidelines for audits of amusement rides and devices.  
4.2 An audit can include inspections, evaluations, or examinations during the design, manufacturing, installation, commissioning, operation, or major modification of an amusement ride or device.  
4.3 When audits are performed, they shall occur during the relevant stages of an amusement ride or device’s design, manufacture, installation, commissioning or major modification. This guide does not require recurring design, manufacturing, installation, commissioning, or major modification audits.
SCOPE
1.1 This guide establishes guidelines for auditing conformance to ASTM Committee F24 Standards during an audit of an amusement ride or device within a defined scope.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SIGNIFICANCE AND USE
4.1 The purpose of this guide is to establish guidelines for audits of amusement rides and devices.  
4.2 An audit can include inspections, evaluations, or examinations during the design, manufacturing, installation, commissioning, operation, or major modification of an amusement ride or device.  
4.3 When audits are performed, they shall occur during the relevant stages of an amusement ride or device’s design, manufacture, installation, commissioning or major modification. This guide does not require recurring design, manufacturing, installation, commissioning, or major modification audits.
SCOPE
1.1 This guide establishes guidelines for auditing conformance to ASTM Committee F24 Standards during an audit of an amusement ride or device within a defined scope.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SIGNIFICANCE AND USE
4.1 The purpose of this guide is to establish guidelines for audits of amusement rides and devices.  
4.2 An audit can include inspections, evaluations, or examinations during the design, manufacturing, installation, commissioning, operation, or major modification of an amusement ride or device.  
4.3 When audits are performed, they shall occur during the relevant stages of an amusement ride or device’s design, manufacture, installation, commissioning or major modification. This guide does not require recurring design, manufacturing, installation, commissioning, or major modification audits.
SCOPE
1.1 This guide establishes guidelines for auditing conformance to ASTM Committee F24 Standards during an audit of an amusement ride or device within a defined scope.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SIGNIFICANCE AND USE
4.1 The purpose of this guide is to establish guidelines for audits of amusement rides and devices.  
4.2 An audit can include inspections, evaluations, or examinations during the design, manufacturing, installation, commissioning, operation, or major modification of an amusement ride or device.  
4.3 This guide is not intended to require recurring design, manufacturing, installation, commissioning or major modification audits. Rather, it is intended that such audits be performed during the relevant stages of an amusement ride or device’s design, manufacture, installation, commissioning or major modification.
SCOPE
1.1 This guide establishes guidelines for auditing conformance to ASTM Committee F24 Standards during an audit of an amusement ride or device within a defined scope.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SIGNIFICANCE AND USE
The purpose of this guide is to delineate information and recommend inspections for amusement rides and devices.
Inspection within the context of this guide is to determine conformance with applicable ASTM Committee F24 standards.
SCOPE
1.1 This guide covers the inspections of amusement rides and devices during prototype development, production manufacturing, installation or erection, following major modification or overhaul, and during operation and maintenance periods. Note 1 For information related to this guide, see Specification F 698, Terminology F 747, and Guide F 846.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This guide covers the inspections of amusement rides and devices during prototype development, production manufacturing, installation or erection, following major modification or overhaul, and during operation and maintenance periods. Note 1 For information related to this guide, see Specification F 698, Terminology F 747, and Guide F 846.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This practice establishes information for maintenance procedures of amusement rides and devices.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This guide covers the inspections of amusement rides and devices during prototype development, production manufacturing, installation or erection, following major modification or overhaul, and during operation and maintenance periods. Note 1For information related to this guide, see Specification F 698, Definitions F 747, and Guide F 846.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This practice establishes information for maintenance procedures of amusement rides and devices.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This guide covers the inspections of amusement rides and devices during prototype development, production manufacturing, installation or erection, following major modification or overhaul, and during operation and maintenance periods.
Note 1-- For information related to this guide, see Specification F698, Definitions F747, and Guide F846.
1.2  This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This guide covers the inspections of amusement rides and devices during prototype development, production manufacturing, installation or erection, following major modification or overhaul, and during operation and maintenance periods.
Note 1-- For information related to this guide, see Specification F698, Definitions F747, and Guide F846.
1.2  This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This practice establishes information for maintenance procedures of amusement rides and devices.  
1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SIGNIFICANCE AND USE
The purpose of this practice is to delineate information for the maintenance of amusement rides and devices.
SCOPE
1.1 This practice establishes information for maintenance procedures of amusement rides and devices.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
WITHDRAWN RATIONALE
This practice establishes information for maintenance procedures of amusement rides and devices.
Formerly under the jurisdiction of Committee F24 on Amusement Rides and Devices, this practice was withdrawn in July 2014 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.