SIGNIFICANCE AND USE
4.1 This practice sets forth the minimum requirements for calibration and functionality checks when conducting PDD examinations and related activities. For additional information see Practice E1954 and Guide E2000.
SCOPE
1.1 This practice provides guidelines for calibration and instrumentation (both analog and computerized systems) actively used in the psychophysiological detection of deception (verification of truth). As a minimum, such instrumentation shall simultaneously record an individual’s respiratory, exosomatic electrodermal, and cardiovascular activity.  
1.2 Analog polygraphs shall be calibrated by the psychophysiological detection of deception (PDD) examiner, manufacturer, or factory-authorized individual.  
1.3 Computerized instrumentation shall be calibrated by the manufacturer or factory-authorized individual.  
1.4 The PDD examiner or factory-authorized individual shall perform functionality checks to ensure instrumentation is operating properly.  
1.5 This practice does not prohibit additional components which may be offered as supplemental measurements of physiological change. Additional recording components (such as movement sensors) may be used in addition to, but not replace, the required minimum components and these additional components shall meet the manufacturer’s specifications for calibration.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language

SIGNIFICANCE AND USE
4.1 This guide sets forth the minimum requirements for instrumentation and software when conducting PDD examinations. For additional information see Practice E1954 and Guide E2000.
SCOPE
1.1 This guide covers the minimum requirements for instrumentation (both analog and computerized systems), sensors and operating software used in the forensic psychophysiological detection of deception (PDD). As a minimum, such instrumentation shall simultaneously record an individual’s respiratory, electrodermal, and cardiovascular activity.  
1.2 This guide does not prohibit additional components, which may be offered as supplemental measurements of physiological change. Additional recording components may be used in addition to but not to replace the required minimum components.

  • Guide
    2 pages
    English language

SIGNIFICANCE AND USE
This practice sets forth the minimum requirements for calibration and functionality checks when conducting PDD examinations and related activities. For additional information see Practice E1954 and Guide E2000.
SCOPE
1.1 This practice provides guidelines for calibration and instrumentation (both analog and computerized systems) actively used in the psychophysiological detection of deception (verification of truth). As a minimum, such instrumentation shall simultaneously record an individual's respiratory, exosomatic electrodermal, and cardiovascular activity.  
1.2 Analog polygraphs shall be calibrated by the psychophysiological detection of deception (PDD) examiner, manufacturer, or factory-authorized individual.  
1.3 Computerized instrumentation shall be calibrated by the manufacturer or factory-authorized individual.  
1.4 The PDD examiner or factory-authorized individual shall perform functionality checks to ensure instrumentation is operating properly.
1.5 This practice does not prohibit additional components which may be offered as supplemental measurements of physiological change. Additional recording components (such as movement sensors) may be used in addition to, but not replace, the required minimum components and these additional components shall meet the manufacturer's specifications for calibration.

  • Standard
    2 pages
    English language
  • Standard
    2 pages
    English language

SIGNIFICANCE AND USE
This practice sets forth the minimum requirements for calibration and functionality checks when conducting PDD examinations and related activities. For additional information see Practice E1954 and Guide E2000.
SCOPE
1.1 This practice provides guidelines for calibration and instrumentation (both analog and computerized systems) actively used in the psychophysiological detection of deception (verification of truth). As a minimum, such instrumentation shall simultaneously record an individual's respiratory, exosomatic electrodermal, and cardiovascular activity.  
1.2 Analog polygraphs shall be calibrated by the psychophysiological detection of deception (PDD) examiner, manufacturer, or factory-authorized individual.  
1.3 Computerized instrumentation shall be calibrated by the manufacturer or factory-authorized individual.  
1.4 The PDD examiner or factory-authorized individual shall perform functionality checks to ensure instrumentation is operating properly.
1.5 This practice does not prohibit additional components which may be offered as supplemental measurements of physiological change. Additional recording components (such as movement sensors) may be used in addition to, but not replace, the required minimum components and these additional components shall meet the manufacturer's specifications for calibration.

  • Standard
    2 pages
    English language

SIGNIFICANCE AND USE
This guide sets forth the minimum requirements for instrumentation and software when conducting PDD examinations. For additional information see Practice E1954 and Guide E2000.
SCOPE
1.1 This guide covers the minimum requirements for instrumentation (both analog and computerized systems), sensors and operating software used in the forensic psychophysiological detection of deception (PDD). As a minimum, such instrumentation shall simultaneously record an individual’s respiratory, electrodermal, and cardiovascular activity.
1.2 This guide does not prohibit additional components, which may be offered as supplemental measurements of physiological change. Additional recording components may be used in addition to but not to replace the required minimum components.

  • Guide
    2 pages
    English language
  • Guide
    2 pages
    English language

SIGNIFICANCE AND USE
This guide sets forth the minimum requirements for instrumentation and software when conducting PDD examinations. For additional information see Practice E 1954 and Guide E 2000.
SCOPE
1.1 This guide covers the minimum requirements for instrumentation (both analog and computerized systems), sensors and operating software used in the forensic psychophysiological detection of deception (PDD). As a minimum, such instrumentation shall simultaneously record an individuals respiratory, electrodermal, and cardiovascular activity.
1.2 This guide does not prohibit additional components, which may be offered as supplemental measurements of physiological change. Additional recording components may be used in addition to but not to replace the required minimum components.

  • Guide
    2 pages
    English language

SCOPE
1.1 This practice provides guidelines for calibration and instrumentation (both analog and computerized systems) used in the psychophysiological detection of deception (verification of truth). As a minimum, such instrumentation shall simultaneously record an individual's respiratory, electrodermal, and cardiovascular activity. Analog polygraphs shall be calibrated by the psychophysiological detection of deception (PDD) examiner, manufacturer, or factory-authorized individual. Computerized instrumentation shall be calibrated by the manufacturer or factory-authorized individual. The PDD examiner or factory-authorized individual shall perform functionality checks to ensure instrumentation is operating properly.
1.2 This practice does not prohibit additional components which may be offered as supplemental measurements of physiological change. Additional recording components (such as movement sensors) shall meet the manufacturer's specifications.

  • Standard
    2 pages
    English language

SIGNIFICANCE AND USE
This practice sets forth the minimum requirements for calibration and functionality checks when conducting PDD examinations and related activities. For additional information see Practice E 1954 and Guide E 2000.
SCOPE
1.1 This practice provides guidelines for calibration and instrumentation (both analog and computerized systems) actively used in the psychophysiological detection of deception (verification of truth). As a minimum, such instrumentation shall simultaneously record an individual's respiratory, exosomatic electrodermal, and cardiovascular activity.
1.2 Analog polygraphs shall be calibrated by the psychophysiological detection of deception (PDD) examiner, manufacturer, or factory-authorized individual.
1.3 Computerized instrumentation shall be calibrated by the manufacturer or factory-authorized individual.
1.4 The PDD examiner or factory-authorized individual shall perform functionality checks to ensure instrumentation is operating properly.
1.5 This practice does not prohibit additional components which may be offered as supplemental measurements of physiological change. Additional recording components (such as movement sensors) may be used in addition to, but not replace, the required minimum components and these additional components shall meet the manufacturer's specifications for calibration.

  • Standard
    2 pages
    English language

Frequently Asked Questions

E52.02 is a Technical Committee within ASTM International. It is named "Instrumentation". This committee has published 8 standards.

E52.02 develops ASTM standards in the area of Information technology. Currently, there are 8 published standards from this technical committee.

ASTM is a standardization organization that develops and publishes standards to support industry, commerce, and regulatory requirements.

A Technical Committee (TC) in ASTM is a group of experts responsible for developing international standards in a specific technical area. TCs are composed of national member body delegates and work through consensus to create standards that meet global industry needs. Each TC may have subcommittees (SCs) and working groups (WGs) for specialized topics.

Loading...