ECISS/TC 29/SC 11/WG 3 - Tubes for precision applications

This European Standard specifies the technical delivery conditions for seamless cold drawn steel tubes of circular cross section used in hydraulic and pneumatic power systems with specified outside diameter D inferior or equal to 80 mm.
Tubes according to this document are characterised by having precisely defined tolerances on dimensions and a specified maximum surface roughness.
The allowed pressure rates and upper temperatures are the responsibility of the customer in accordance with the state of the art and in application of the safety coefficients specified in the applicable regulations, codes or standards. Concerning the lower temperature range applicability the impact energy requirements are given at 0° C.
NOTE   Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done.

This European Standard specifies the technical delivery conditions for seamless cold drawn steel tubes of circular cross section for precision applications with specified outside diameter D <= 380 mm.
NOTE   This document may also be applied to other types of cross section and other suitable processes.
Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. Typical fields of application are in the automotive, furniture and general engineering industries.

This European Standard specifies the technical delivery conditions for welded cold sized steel tubes of square and rectangular cross section for precision applications.
Tubes according to this document are characterised by having precisely defined tolerances on dimension and a specified maximum surface roughness. Typical fields of application are in the automotive, furniture and general engineering industries.

This European Standard specifies the technical delivery conditions for welded cold drawn steel tubes of circular cross section for precision applications with specified outside diameter D <= 150 mm.
NOTE   This document may also be applied to other types of cross section.
Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. Typical fields of application are in the automotive, furniture and general engineering industries.

This European Standard specifies the technical delivery conditions for welded cold sized steel tubes of circular cross section for precision applications with specified outside diameter D <= 193,7 mm.
NOTE   This document may also be applied to other types (excluding square and rectangular) of cross section.
Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. Typical fields of application are in the vehicle, furniture and general engineering industries.

This Part of EN 10305 specifies the technical delivery conditions for welded cold drawn tubes of circular cross section for use in hydraulic and pneumatic power systems.
Tubes according to this Part of EN 10305 are characterized by having precisely defined tolerances on dimensions and a specified surface roughness.
The allowed pressure rates and temperatures are the responsibility of the customer in accordance with the state of the art and in the application of the safety coefficients specified in the applicable regulations, codes or standards.

This European Standard specifies the technical delivery conditions for seamless cold drawn steel tubes of circular cross section used in hydraulic and pneumatic power systems.
Tubes according to European are characterized by having precisely defined tolerances on dimensions and a specified surface roughness.
The allowed pressure rates and temperatures are the responsibility of the customer in accordance with the state of the art and in application of the safety coefficients specified in the applicable regulations, codes or standards.

CMC - Insert missing footnote text in 8.5.6 (editorial error)

This part of EN 10305 specifies the technical delivery conditions for welded and sized steel tubes of  square and rectangular cross section for precision applications.
Tubes according to this part of EN 10305 are characterized by having precisely defined tolerances on dimension and a specified surface roughnesss. Typical fields of application are in the vehicle, furniture and general engineering industries.

This Part of this European Standard specifies the technical delivery conditions for welded cold sized steel tubes of circular cross section for precision applications.
NOTE   This Part of this European Standard may also be applicable to non-circular (excluding square and rectangular) cross sections.
Tubes according to this Part of this European Standard are characterized by having precisely defined tolerances on dimensions and a specified surface roughness. Typical fields of application are in the vehicle, furniture and general engineering industries.

This Part of this European Standard specifies the technical delivery conditions for welded cold drawn steel tubes of circular cross section for precision application.
NOTE   This Part of this European Standard may also be applicable to other types of cross section.
Tubes according to this Part of this European Standard are characterized by having precisely defined tolerances on dimensions and a specified surface roughness. Typical fields of application are in the vehicle, furniture and general engineering industries.

This Part of this European Standard specifies the technical delivery conditions for seamless cold drawn steel tubes of circular cross section for precision applications.
NOTE   This Part of this European Standard can also cover other types of cross section.
Tubes according to this Part of this European Standard are characterized by having precisely defined tolerances on dimensions and a specified surface roughness. Typical fields of application are in the vehicle, furniture and general engineering industries.