CEN/TC 69/WG 7 - Valves for water supply

This European Standard defines the minimum fitness for purpose requirements for hydrants to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.
This European Standard specifies the design requirements, the performance requirements, and the conformity assessment method for hydrants, whatever their type, materials and functions. Where hydrants can be used for fire fighting, irrigation or other function, additional requirements can be given in other standards.
This part of EN 1074 deals with the requirements applicable to both underground and pillar hydrants, in sizes DN 65 to DN 150, and PFA up to 16 bar.
This part of EN 1074 does not give requirements for the outlets or their interface with the hydrants, since they are subject to national standards.

To correct the test procedure described in C.2 of annex C 'Test method for the operation of valves".

This European Standard specifies the minimum fitness for purpose requirements for valves to be used in, or connected to, water supply pipe systems above or below ground (see EN 805), carrying water intended for human consumption. This standard specifies the design requirements, the performance requirements, and the conformity assessment method for valves, whatever their type and materials.
This standard applies in priority to any other product or test standard : the requirements from other standards apply only when this standard refers to them. This standard deals with the requirements applicable to air valves with DN up to DN 300 and PFA 6 to PFA 25.

This part of the standard determines the special requirements and tests to be applied to control valves for a range PN 6 to PN 25, the nominal dimensions of which are as defined in Part 1. The Type tests shall be carried out on valves of DN <= 500, by agreement between the supplier and purchaser, for higher DNs. This Part 5 does not deal with the performance of control valve accessories whether or not these form an integral part of the valves.

This European Standard defines the minimum fitness for purpose requirements for check valves to be used in, or connected to, water supply pipe systems, above orbelow ground (see prEN 805:1996), carrying water intended for human consumption.This standard specifies the design requirements, the performance requirements and the conformity assessment method for check valves, whatever their type and materials. This standard applies in priority to any product or test standard: the requirements from other standards apply only when this standard refers to them.

This standard defines the minimum fitness for purpose requirements for valves to be used in, or connected to, water supply pipe systems above or below ground (see prEN  805, including meter valves), and also suitable for pipe systems carrying raw or treated water (e.g for irrigation, for fire fighting).

This European Standard defines the minimum fitness for purpose requirements for valves to be used in, or connected to, water supply pipe systems above or below ground (see prEN 805, including the meter valves), and also suitable for pipe systems carrying raw or treated water (e.g. for irrigation, for fire fighting).

This European Standard defines the minimum fitness for purpose requirements for hydrants to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.
This standard specifies the design requirements, the performance requirements, and the conformity assessment method for hydrants, whatever their type, materials and functions. Where hydrants can be used for fire fighting, irrigation or other function, additional requirements can be given in other standards (e.g. prEN 14339:2001).
This standard applies in priority to any other product or test standard. The requirements from other standards apply only when this European Standard refers to them.
This part of EN 1074 deals with the requirements applicable to both underground and pillar hydrants, in sizes DN 65 to DN 150, and PFA up to 16 bar.
This part of EN 1074 does not give requirements for the outlets or their interface with the hydrants, since they are subject to national standards.