CEN/TC 128/SC 6 - Bitumen shingles and corrugated sheets for roofing

This European Standard specifies the properties, performance and methods of test of the finished bitumen shingles prior to them being laid on the roof.
It also includes rules for marking, labelling and provides a clause for evaluation of conformity.
This European Standard does not include design requirements, installation techniques and roof system performance.
This European Standard applies to bitumen shingles where the watertightness of the system is ensured by overlapping, by different adhesive systems or a combination of these, according to manufacturer’s installation instructions, intended to be laid as covering for pitched roofs and/or wall cladding.
This European Standard applies only to bitumen shingles with a mineral reinforcement, synthetic reinforcement or a mixture of the two.
In case of multilayer shingles each layer need to have the same type of reinforcement and same type of coating (ref. to Clause 8).

This European Standard specifies the technical properties and establishes the test and inspection methods for finished corrugated bitumen sheets on leaving the factory. It also provides for the evaluation of conformity of products with the requirements of this standard.

This document specifies the properties, performance and methods of test of the finished bitumen shingles prior to them being laid on the roof.
It also includes rules for marking, labelling and provides a clause for assessment and verification of constancy of performance (AVCP).
This document does not include design requirements, installation techniques and roof system performance.
This document applies to bitumen shingles where the watertightness of the system is ensured by overlapping, by different adhesive systems or a combination of these, according to manufacturer’s installation instructions, intended to be laid as covering for pitched roofs and/or wall cladding.
This document applies only to bitumen shingles with a mineral reinforcement, synthetic reinforcement or a mixture of the two.
This document covers shingles with a minimum mass of bitumen of 1 300 g/m2 in case of monolayer shingles and 1 500g/m2 in case of multilayer shingle.
In case of multilayer shingles each layer need to have the same type of reinforcement and same type of coating (ref. to Clause 8).

This European Standard specifies the technical properties and establishes the test and inspection methods for finished corrugated bitumen sheets on leaving the factory. It also provides for the evaluation of conformity of products with the requirements of this standard.

Modifcation of the header and text of clause 5.3.7

This European Standard applies to bitumen shingles where the watertightness of the system is ensured by overlapping, by different adhesive systems or a combination of these, according to manufacturer's installation instructions, intended to be laid as covering for pitched roofs and/or wall cladding.
This European Standard applies only to bitumen shingles with a mineral reinforcement, synthetic reinforcement or a mixture of the two.
This European Standard does not apply to bitumen shingles having a mass of bitumen less than 1 300 g/m2.

This European Standard specifies the technical properties and establishes the test and inspection methods for finished corrugated bitumen sheets on leaving the factory. It also provides for the evaluation of conformity of products with the requirements of this standard..

This European Standard specifies the geometrical, mechanical and physical properties and the characteristics of the constituents and of the finished product on leaving the factory, and also the test and inspection methods. It is applicable to all bitumen sheets with regular corrugations used for dicontinuousroofing. This European Standard is not applicable to bitumen sheets containing asbestos fibres.

This European Standard applies to bitumen shingles, small discontinuous materials, intended to be laid as covering for the fabrication of pitched roofs. This European Standard applies only to bitumen shingles with a mineral reinforcement, synthetic reinforcement or a mixture of the two. It specifies the properties, performance and methods of test of the finished product prior to it being laid on the roof.