CEN/TC 205/WG 10 - Non-invasive sphygmomanometers

This Part of EN 1060 specifies performance, efficiency and safety requirements for electro-mechanical blood pressure measuring systems that, by means of an inflatable cuff are used for non-invasive measurements of arterial blood pressure at the upper arm, the wrist and the thigh. It also specifies requirements for their accessories and gives test methods.
This Part of EN 1060 applies to electro-mechanical blood pressure measuring systems in which the cuff pressure is measured electronically, but in which the blood pressure can be determined either manually with the aid of a stethoscope or automatically.
Additional safety requirements for automatic cycling indirect blood pressure monitoring equipment are specified in EN 60601-2-30:1995.
This Part of EN 1060 is to be used in conjunction with EN 1060-1.

This document describes test procedures for investigations to determine the overall system accuracy of automated non-invasive sphygmomanometers, designed for the indirect measurement of blood pressure.

This Part of this European Standard specifies general requirements for non-invasive sphygmomanometers and their accessories which, by means of an inflatable cuff, are used for the non-invasive measurement of arterial blood pressure.
It specifies performance, efficiency, mechanical and electrical safety requirements for these devices and gives test methods.
NOTE   This standard recommends that Luer lock connectors should not be used with these devices.

This part of EN 1060, in conjunction with EN 1060-1:1995, specifies performance, efficiency and mechanical and electrical safety requirements, including test methods, for non-invasive mechanical sphygmomanometers and their accessories which, by means of an inflatable cuff, are used for the non-invasive measurement of arterial blood pressure.

To update EN 1060-1:1995 so as to amend cuff marking

This part of this European Standard specifies general requirements for non- invasive sphygmomanometers and their accessories which, by means of an inflatable cuff, are used for the non-invasive measurement of arterial blood pressure.   It specifies performance, efficiency, mechanical and electrical safety requirements for these devices and gives test methods.   Note: This standard recommends that Luer lock connectors should not be used with these devices.

This Part of EN 1060 specifies performance, efficiency and safety requirements for electro-mechanical blood pressure measuring systems that, by means of an inflatable cuff are used for non-invasive measurements of arterial blood pressure at the upper arm, the wrist and the thigh. It also specifies requirements for their accessories and gives test methods.  This Part of EN 1060 applies to electro-mechanical blood pressure measuring systems in which the cuff pressure is measured electronically, but in which the blood pressure can be determined either manually with the aid of a stethoscope or automatically.  Additional safety requirements for automatic cycling indirect blood pressure monitoring equipment are specified in EN 60601-2-30: 1995.  This Part of EN 1060 is to be used in conjunction with EN 1060-1.

This part of EN 1060, in conjunction with prEN 1060-1:1995, specifies performance, efficiency and mechanical and electrical safety requirements, including test methods, for non-invasive mechanical sphygmomanometers and their accessories which, by means of an inflatable cuff, are used for the non-invasive measurement of arterial blood pressure.