EN 1060-1:1995/A1:2002
(Amendment)Non-invasive sphygmomanometers - Part 1: General requirements
Non-invasive sphygmomanometers - Part 1: General requirements
To update EN 1060-1:1995 so as to amend cuff marking
Nichtinvasive Blutdruckmessgeräte - Teil 1: Allgemeine Anforderungen
Tensiomètres non invasifs - Partie 1: Exigences générales
Neinvazivni sfigmomanometri - 1. del: Splošne zahteve
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1060-1:2000/A1:2002
01-november-2002
Neinvazivni sfigmomanometri - 1. del: Splošne zahteve
Non-invasive sphygmomanometers - Part 1: General requirements
Nichtinvasive Blutdruckmessgeräte - Teil 1: Allgemeine Anforderungen
Tensiometres non invasifs - Partie 1: Exigences générales
Ta slovenski standard je istoveten z: EN 1060-1:1995/A1:2002
ICS:
11.040.55 'LDJQRVWLþQDRSUHPD Diagnostic equipment
SIST EN 1060-1:2000/A1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1060-1:2000/A1:2002
---------------------- Page: 2 ----------------------
SIST EN 1060-1:2000/A1:2002
EUROPEAN STANDARD
EN 1060-1:1995/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2002
ICS 11.040.55
English version
Non-invasive sphygmomanometers - Part 1: General
requirements
Tensiomètres non invasifs - Partie 1: Exigences générales Nichtinvasive Blutdruckmessgeräte - Teil 1: Allgemeine
Anforderungen
This amendment A1 modifies the European Standard EN 1060-1:1995; it was approved by CEN on 6 April 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.