This document specifies calculation and verification methods for evaluating the spill light coming from the electric light sources of lighting installations in public and non-public outdoor areas, in the following application fields:
-   lighting installations in outdoor workplaces (ref. EN 12464-2);
-   road lighting installations (ref. CEN/TR 13201-1, EN 13201 series);
-   lighting installations for outdoor sports fields and areas (ref. EN 12193);
-   monument and architectural lighting installations;
-   lighting installations for the outdoor areas of residential buildings;
-   lighting installations for the outdoor areas of parks and gardens.
This document also considers luminous signs and luminous advertising installations in outdoor areas and the light emission from illuminated environments covered by translucent surfaces.
With the exception of lighting installations within premises located and designed for observation from exterior observers light emitted from windows, skylights and shop windows are excluded.
The calculation methods described are intended as an integral part of the lighting design and are suitable for evaluating consistency with any regulatory conditions.
Due to the complexity of the phenomena and the numerous variables, this document does not consider the influence of atmospheric conditions in evaluating obtrusive light.
This document does not apply to lighting installations for tunnels and underpasses and to all signalling devices such as traffic lights, active road signs and the like, or to vehicle headlamps.
This document additionally considers the spectral composition of the light concerned, as well as the room brightening at building openings not intentionally lit in the above application areas and any glare effects from these.

  • Technical specification
    49 pages
    English language
    e-Library read for

Frequently Asked Questions

CEN/TC 169/WG 15 is a Working Group within the European Committee for Standardization (CEN). It is named "Assessment and control of obtrusive light in outdoor spaces" and is responsible for: This working group describes simplified conventional calculation and measuring methods for evaluating • a very small-scale lighting installations; • the upper hemisphere average emission (ratio of); • the light intensity to the upper hemisphere; • the relationship between upward luminous flux not intercepted by the structure to be illuminated and the total nominal luminous flux emitted by the lighting system (Rfd), and relevant comprehensive calculation methods, derived from CIE 150:2017 (additional to Rfd); • the average luminance on the vertical surface to be illuminated; • the intrusive light (light trespass) to adjacent areas; • the spectral component of the light (G factor); • the luminous flux (dimming). The above methods are intended to predict the obtrusive light in outdoor spaces of a lighting system at the design stage and also could be used to evaluate the of obtrusive light in outdoor spaces of actual lighting installation as well. This working group also considers contents of CIE 001-1980 Guidelines for minimizing urban sky glow near astronomical observatories and outcomes from CIE TC 2-95 “measurements of obtrusive light and sky glow” This committee has published 1 standards.

CEN/TC 169/WG 15 develops CEN standards in the area of Information technology. The scope of work includes: This working group describes simplified conventional calculation and measuring methods for evaluating • a very small-scale lighting installations; • the upper hemisphere average emission (ratio of); • the light intensity to the upper hemisphere; • the relationship between upward luminous flux not intercepted by the structure to be illuminated and the total nominal luminous flux emitted by the lighting system (Rfd), and relevant comprehensive calculation methods, derived from CIE 150:2017 (additional to Rfd); • the average luminance on the vertical surface to be illuminated; • the intrusive light (light trespass) to adjacent areas; • the spectral component of the light (G factor); • the luminous flux (dimming). The above methods are intended to predict the obtrusive light in outdoor spaces of a lighting system at the design stage and also could be used to evaluate the of obtrusive light in outdoor spaces of actual lighting installation as well. This working group also considers contents of CIE 001-1980 Guidelines for minimizing urban sky glow near astronomical observatories and outcomes from CIE TC 2-95 “measurements of obtrusive light and sky glow” Currently, there are 1 published standards from this working group.

The European Committee for Standardization (CEN) is a public standards organization that brings together the national standardization bodies of 34 European countries. CEN provides a platform for developing European Standards (ENs) and other technical documents in relation to various products, materials, services, and processes, supporting the European Single Market.

A Working Group in CEN is a specialized group responsible for developing standards or technical work within a defined scope. These bodies bring together international experts to create consensus-based standards that support global trade, safety, and interoperability.