MT 401 - TC 105/MT 401

IEC 62282-5-100:2018 covers construction, marking and test requirements for portable fuel cell power systems. These fuel cell systems are movable and not fastened or otherwise secured to a specific location. The purpose of the portable fuel cell power system is to produce electrical power. This document applies to AC and DC type portable fuel cell power systems, with a rated output voltage not exceeding 600 V AC, or 850 V DC for indoor and outdoor use.

IEC 62282-5-1:2012 covers construction, marking and test requirements for portable fuel cell power systems intended to produce electrical power. Applies to a.c. and d.c. type portable fuel cell power systems, with a rated output voltage not exceeding 600 V a.c., or 850 V d.c. for indoor and outdoor use. The major technical changes with respect to the first edition are as follows:
- referencing an alternative test method; reduction of the limit on flammable atmospheres;
- consideration of additional effluents and criteria to establish if a system is suitable for indoor or outdoor operation;
- revision of specific criteria for oxygen detector sensor performance;
- new test method and new drop heights; addition of a table giving limits on emission of effluents.
Keywords: fuel cell