MT 60268-4 - TC 100/TA 20/MT 60268-4

IEC 60268-4:2018 is available as IEC 60268-4:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60268-4:2018 specifies methods of measurement for the electrical impedance, sensitivity, directional response pattern, dynamic range and external influences of sound system microphones, and also details the characteristics to be specified by the manufacturer. It applies to sound system microphones for all applications for speech and music. It does not apply to measurement microphones, but it does apply to each audio channel of microphones having more than one channel, for example for stereo or similar use. It is also applicable to flush-mounted microphones and to the analogue characteristics of microphones with digital audio output. For the purposes of this International Standard, a microphone includes all such devices as transformers, pre-amplifiers, or other elements that form an integral part of the microphone, up to the output terminals specified by the manufacturer. The major characteristics of a microphone are considered in Clauses 6 to 21. Additional characteristics are considered in Annex A and Annex C. IEC 60268-4:2018 cancels and replaces the fifth edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) subclause 19.4 on "pop" measurement replaces Annex C;
b) new Annex D for noise measurements in the digital domain.

IEC 60268-4:2014 specifies methods of measurement for the electrical impedance, sensitivity, directional response pattern, dynamic range and external influences of sound system microphones, and also details the characteristics to be specified by the manufacturer. This fifth edition cancels and replaces the fourth edition published in 2010, and constitutes a technical revision. It includes the following changes:
- clarification of Table 5 of classification of characteristics;
- clarification of graphical representation;
- clarification of environmental influences;
- rewritten clause for EMC;
- tolerances and more specific values for noise measurements;
- inclusion of near-field response for sound source-to-microphone distances of the order of 30 cm.