ISO/TC 4/SC 6 - Insert bearings

This document specifies the dimensional and geometrical characteristics, boundary dimensions and tolerances of insert bearings and eccentric locking collars and the radial internal clearances of insert bearings.

ISO 3228:2013 specifies boundary dimensions and tolerances for cast and pressed housings for insert bearings for which boundary dimensions are given in ISO 9628. It applies to plummer block housings, flanged housings and take-up housings. The inclusion of relubrication features is optional, but when provided it is intended that they intersect the zone specified in ISO 9628 in such a way that lubricant satisfactorily feeds from the housing through this zone. The exact design of the relubrication features is not otherwise covered by ISO 3228:2013.

ISO 9628:2006 specifies the characteristics, boundary dimensions and tolerances of insert bearings and eccentric locking collars and the radial internal clearances of insert bearings.

Specifies boundary dimensions and tolerances for cast and pressed housings for insert bearings for which boundary dimensions are given in ISO 9628. Applies to plummer block housings, flanged housings and take-up housings. The inclusion of relubrication features is optional.

Specifies the characteristics, boundary dimensions (in mm and in), tolerances and radial internal clearances.