ISO/TC 261/JG 61 - Joint ISO/TC 261-ASTM F 42 Group: Mechanical properties characterization of additively manufactured metallic materials

This document covers supplementary guidelines for evaluation of mechanical properties including static/quasi-static and dynamic testing of metals made by additive manufacturing (AM) to provide guidance toward reporting when results from testing of as-built specimen or specimen cut out from AM parts made by this technique or both. This document is provided to leverage already existing standards. Guidelines are provided for mechanical properties measurements and reporting for additively manufactured metallic specimen as well as those cut out from AM parts. This document does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use. This document expands upon the nomenclature of ISO/ASTM 52900 and principles of ISO 17295 and extends them specifically to metal additive manufacturing. The application of this document is primarily intended to provide guidance on orientation designations in cases where meaningful orientation/direction for AM cannot be obtained from available test methods.

This document provides specifications and illustrations for the positioning and orientation of parts with regards with coordinate systems and testing methodologies for additive manufacturing (AM) technologies in an effort to standardize the method of representation used by AM users, producers, researchers, educators, press/media, and others, particularly when reporting results from testing of parts made on AM systems. Included specifications cover coordinate systems and the location and orientation of parts. It is intended to be in accordance with the principles of ISO 841 and to clarify the specific adaptation of those principles for additive manufacturing.

This document covers supplementary guidelines for evaluation of mechanical properties including static/quasi-static and dynamic testing of metals made by additive manufacturing (AM) to provide guidance toward reporting when results from testing of as-build specimen or those excised from printed parts made by this technique or both. This document is provided to leverage already existing standards. Guidelines are provided for mechanical properties measurements and reporting for additively manufactured metallic specimen as well as those excised from parts. This document does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use. This document expands upon the nomenclature of ISO/ASTM 52900 and principles of ISO/ASTM 52921 and extends them specifically to metal additive manufacturing. The application of this document is primarily intended to provide guidance on orientation designations in cases where meaningful orientation/direction for AM cannot be obtained from available test methods.