01.100.01 - Technical drawings in general

This document establishes the types of lines used in technical drawings (e.g. diagrams, plans or
maps), their designations and their configurations, as well as general rules for the draughting of lines.
In addition, this document specifies general rules for the representation of leader and reference lines
and their components as well as for the arrangement of instructions on or at leader lines in technical
documents. Annexes have been provided for specific information on mechanical, construc...view more

This document establishes the types of lines used in technical drawings (e.g. diagrams, plans or maps), their designations and their configurations, as well as general rules for the draughting of lines. In addition, this document specifies general rules for the representation of leader and reference lines and their components as well as for the arrangement of instructions on or at leader lines in technical documents. Annexes have been provided for specific information on mechanical, construction...view more

This document specifies the general principles for presenting views, sections and cuts applicable to various kinds of technical drawings (e.g. mechanical, electrical, architectural, civil engineering), following the orthographic projection methods specified in ISO 5456-2. Views and sections for shipbuilding technical drawings are discussed in ISO 128-15. Views and sections for 3D models are discussed in ISO 16792. Attention has also been given in this document to the requirements of reproduction...view more

This document presents an index of the terms used in the ISO 128 series in English, French, German, Chinese, Russian and Japanese.

This document gives general rules for the execution of technical drawings (2D and 3D), as well as presenting the structure of the other parts of the ISO 128 series. This document is applicable to technical drawing in the fields of mechanical engineering, construction, architecture and shipbuilding. It is applicable to both manual and computer-based technical drawings. For the purpose of this document the term "technical drawing" shall be interpreted in the broadest possible sense, encompassing t...view more

ISO 13715:2017 specifies rules for the indication and dimensioning of undefined edges in technical product and dimensions. The proportions and dimensions of the graphical symbols to be used are also specified.
In cases where the geometrically defined shape of an edge (for example, 1 × 45°) is required, the general dimensioning principles given in ISO 129‑1 apply.

ISO 129-1:2018 establishes the general principles for presentation of dimensions and associated tolerances that apply to 2D technical drawings in all disciplines and trades but which can also be applied to 3D applications.
ISO 129-1:2018 does not cover the application of dimensional tolerances and their meaning. See ISO 14405‑1 for tolerancing principles. This document can only be used to describe the nominal model of a drawing, not the non-ideal surface model (skin model) used for tolerancing ...view more

ISO 18388:2016 specifies a series of relief grooves for shafts and holes, intended for general use in mechanical engineering.
It also intends to avoid unnecessary multiplicity of tools by a restricted selection of groove-types and dimensional versions.
NOTE The shape and the dimensions of the relief grooves type G and H correspond with the "Indexable hard material inserts" according to ISO 6987.

This document lays down rules for the representation of modular sizes, lines and grids on construction drawings. The basic module M is 100 mm (see ISO 1006).
Generally, modular sizes are for use on design drawings, but can also be added to production drawings for manufacturing, orientation and location.

This document establishes complementary rules to ISO 1101 to be applied to pattern specifications and
defines rules to combine individual specifications, for geometrical specifications e.g. using the symbols
POSITION, SYMMETRY, LINE PROFILE and SURFACE PROFILE, as well as STRAIGHTNESS (in the case
where the toleranced features are nominally coaxial) and FLATNESS (in the case where the toleranced
features are nominally coplanar) as listed in Annex C.
These rules apply when a set of tolerance...view more

This document establishes complementary rules to ISO 1101 to be applied to pattern specifications and defines rules to combine individual specifications, for geometrical specifications e.g. using the symbols POSITION, SYMMETRY, LINE PROFILE and SURFACE PROFILE, as well as STRAIGHTNESS (in the case where the toleranced features are nominally coaxial) and FLATNESS (in the case where the toleranced features are nominally coplanar) as listed in Annex C.
These rules apply when a set of tolerance zon...view more

This document provides a list of all ISO geometrical product specification (GPS) and technical product documentation (TPD) standards for technical product specifications (TPS) in the mechanical engineering field. The document operates as an index to the many ISO standards applicable to a TPS by means of cross-reference, and, where appropriate, the subject references are supplemented by commentary and recommendations considered to be of significance but which are not otherwise covered.

ISO 129-5:2018 specifies the dimensioning of drawings for general use on structural metal work mainly consisting of plates, bars and profile sections.

ISO 129-1:2018 establishes the general principles for presentation of dimensions and associated tolerances that apply to 2D technical drawings in all disciplines and trades but which can also be applied to 3D applications. ISO 129-1:2018 does not cover the application of dimensional tolerances and their meaning. See ISO 14405‑1 for tolerancing principles. This document can only be used to describe the nominal model of a drawing, not the non-ideal surface model (skin model) used for tolerancing p...view more

This document gives the rules for geometrical specifications of integral and derived features, using the
line profile and surface profile characteristic symbols as defined in ISO 1101.

ISO 1660:2017 gives the rules for geometrical specifications of integral and derived features, using the line profile and surface profile characteristic symbols as defined in ISO 1101.

Discusses the concepts used in 61346-1 with a life cycle story of an 'object' as a basis.

ISO 3098-1:2015 specifies the general requirements for lettering, in accordance with the other parts of ISO 3098, to be used in technical product documentation (in particular on technical drawings). It includes basic conventions as well as rules for the application of lettering using the following techniques: free-hand lettering (by means of an underlaid "grid"); templates and manual lettering instruments; dry transfer systems; numerically controlled lettering and draughting systems.

ISO 3098-1:2015 specifies the general requirements for lettering, in accordance with the other parts of ISO 3098, to be used in technical product documentation (in particular on technical drawings). It includes basic conventions as well as rules for the application of lettering using the following techniques: free-hand lettering (by means of an underlaid "grid"); templates and manual lettering instruments; dry transfer systems; numerically controlled lettering and draughting systems.