25.080.30 - Broaching machines

This document specifies, with reference to ISO 230-1, the geometric tests on vertical internal type broaching machines with vertical Z-axis providing the main cutting motion. This document also specifies the applicable tolerances corresponding to the tests mentioned above for normal-accuracy vertical internal type broaching machines. This document explains the concepts, configurations and common features of vertical internal type broaching machines. This document also provides related terminology and designation of axes. This document covers only the verification of the accuracy of the broaching machine. This document does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.

This document specifies, with reference to ISO 230-1, the geometric tests on numerically controlled (NC) broaching machines of normal accuracy, with vertical axis acting for cutting operation. The accuracy of rotary axes, if available, is checked with reference to ISO 230-7. This document also specifies, with reference to ISO 230-2, the positioning tests on vertical surface type broaching machines for both linear and rotary axes. This document proposes test pieces containing broached slots and grooves with reference to ISO 230-1, cutting tests under finishing conditions. It also specifies the characteristics and dimensions of the test pieces themselves. This document is intended to supply minimum requirements for assessing the cutting accuracy of the machine. This document also establishes the tolerances for the test results corresponding to general purpose and normal accuracy vertical surface type broaching machines equipped with numerical control. This document explains different concepts or configurations and common features of NC vertical surface type broaching machines which are normally used in the manufacturing of turbine disks. It also provides a terminology and designation of controlled axes with reference to ISO 841. This document deals only with the verification of the accuracy of the broaching machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.

This document specifies, with reference to ISO 230‑1, the geometric tests on internal type broaching machines with horizontal Z-axis providing the main cutting motion. It also specifies the applicable tolerances corresponding to the tests mentioned above for normal-accuracy horizontal internal type broaching machines. This document explains concepts or configurations and common features of horizontal internal type broaching machines. It also provides related terminology and designation of axes. It deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.

This document specifies, with reference to ISO 230‑1, the geometric tests on surface type broaching machines with vertical Z-axis providing the main cutting motion. It also specifies the applicable tolerances corresponding to the tests mentioned above for normal-accuracy vertical surface type broaching machines. This document explains different concepts or configurations and common features of vertical surface type broaching machines. It also provides related terminology and designation of axes. This document deals only with the verification of the accuracy of the broaching machine. It does not apply to the operational testing of the broaching machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to broaching machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.

This document specifies, with reference to ISO 230‑1, the geometric tests on vertical internal type broaching machines with vertical Z-axis providing the main cutting motion. It also specifies the applicable tolerances corresponding to the tests mentioned above for normal-accuracy vertical internal type broaching machines. This document explains concepts or configurations and common features of vertical internal type broaching machines. It also provides related terminology and designation of axes. This document deals only with the verification of the accuracy of the broaching machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.

Specifies geometrical tests for these general purpose and normal accuracy broaching machines and gives the corresponding permissible deviations apply. Gives also the terminology used for the main elements of the machine (in English, French and Russian as well as the equivalent terms in German and Italian). It deals only with the verification of accuracy of the machine. It does not apply to the testing of the running of the machine, nor to machine characteristics which should generally be checked before the accuracy is tested.

specifies both preliminary levelling and geometrical tests for these general purpose and normal accuracy broaching machines, and gives the corresponding permissible deviations which apply. Gives also the terminology used for the main elements of the machine (in English, French and Russian as well as the equivalent terms in German and Italian). It deals only with the verification of accuracy of the machine. It does not apply to the testing of the running of the machine, nor to machine characteristics which should generally be checked before the accuracy is tested.

Specifies both preliminary levelling and geometrical tests for these general purpose and normal accuracy broaching machines, and gives the corresponding permissible deviations which apply. Gives also the terminology used for the main elements of the machine (in English, French and Russian as well as the equivalent terms in German). It deals only with the verification of accuracy of the machine. It does not apply to the testing of the running of the machine, nor to machine characteristics which should generally be checked before the accuracy is tested.