IEC TS 62600-4:2020 specifies the requirements of the technology qualification process for marine renewable technologies. Technology Qualification is a process of providing evidence and arguments to support claims that the technology under assessment will function reliably in a target operating environment within specific limits and with an acceptable level of confidence.
The Technology Qualification process is also assumed in IEC TS 62600-2:2019.
The objective of this document is to provide t...
view more

    • sale 15% off
    • Technical specification
      24 pages
      English language

IEC/TS 62882:2020(E) which is a Technical Specification, provides pressure fluctuation transposition methods for Francis turbines and pump-turbines operating as turbines, including:
- description of pressure fluctuations, the phenomena causing them and the related problems;
- characterization of the phenomena covered by this document, including but not limited to inter-blade vortices, draft tube vortices rope and rotor-stator interaction;
- demonstration that both operating conditions and Tho...
view more

    • sale 15% off
    • Technical specification
      152 pages
      English language

The purpose of this this part of IEC 63132 is to establish, in a general way, suitable procedures
and tolerances for the installation of a vertical Francis turbine or pump-turbine. This document
presents a typical assembly and whenever the word “turbine” is used in this document, it refers
to a vertical Francis turbine or a pump-turbine. There are many possible ways to assemble a
unit. The size of the machine, design of the machine, layout of the powerhouse or delivery
schedule of the compo...
view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

The purpose of this this part of IEC 63132 is to establish, in a general way, suitable
procedures and tolerances for the installation of a vertical Kaplan or propeller turbine. This
document presents a typical assembly and whenever the word “turbine” is used in this
document, it refers to a vertical Kaplan or propeller turbine. There are many possible ways to
assemble a unit. The size of the machine, design of the machine, layout of the powerhouse or
delivery schedule of the components are ...
view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

The purpose of this part of IEC 63132 is to establish, in a general way, suitable procedures and
tolerances for the installation of hydroelectric turbines and generators. This document presents
a typical assembly. There are many possible ways to assemble a unit. The size of the machines,
design of the machines, layout of the powerhouse and delivery schedule of the components are
some of the elements that could result in additional steps, the elimination of some steps and/or
assembly sequenc...
view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

The purpose of this part of IEC 63132 is to establish, in a general way, suitable procedures and
tolerances for installation of generator. This document presents a typical assembly. There are
many possible ways to assemble a unit. The size of the machines, design of the machines,
layout of the powerhouse or delivery schedule of the components are some of the elements that
could result in additional steps, the elimination of some steps and/or assembly sequences.
It is understood that a publi...
view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

IEC TS 62600-1:2020 defines the terms relevant to ocean and marine renewable energy. For the purposes of this Technical Specification, sources of ocean and marine renewable energy are taken to include wave, tidal current, and other water current energy converters. This Technical Specification is intended to provide uniform terminology to facilitate communication between organizations and individuals in the marine renewable energy industry and those who interact with them.
This second edition ca...
view more

    • sale 15% off
    • Technical specification
      17 pages
      English language

IEC TS 62600-3:2020 describes the measurement of mechanical loads on hydrodynamic marine energy converters such as wave, tidal and other water current converters (including river current converters) for the purpose of load simulation model validation and certification. This document contains the requirements and recommendations for the measurement of mechanical loads for such activities as site selection, measurand selection, data acquisition, calibration, data verification, measurement load cas...view more

    • sale 15% off
    • Technical specification
      92 pages
      English language

IEC 63132-4:2020 The purpose of this this part of IEC 63132 is to establish, in a general way, suitable procedures and tolerances for the installation of a vertical Kaplan or propeller turbine. This document presents a typical assembly and whenever the word “turbine” is used in this document, it refers to a vertical Kaplan or propeller turbine. There are many possible ways to assemble a unit. The size of the machine, design of the machine, layout of the powerhouse or delivery schedule of the com...view more

    • sale 15% off
    • Standard
      74 pages
      English and French language

IEC 63132-3:2020 The purpose of this this part of IEC 63132 is to establish, in a general way, suitable procedures and tolerances for the installation of a vertical Francis turbine or pump-turbine. This document presents a typical assembly and whenever the word “turbine” is used in this document, it refers to a vertical Francis turbine or a pump-turbine. There are many possible ways to assemble a unit. The size of the machine, design of the machine, layout of the powerhouse or delivery schedule ...view more

    • sale 15% off
    • Standard
      71 pages
      English and French language

IEC 63132-2:2020: The purpose of this this part of IEC 63132 is to establish, in a general way, suitable procedures and tolerances for installation of generator. This document presents a typical assembly. There are many possible ways to assemble a unit. The size of the machines, design of the machines, layout of the powerhouse or delivery schedule of the components are some of the elements that could result in additional steps, the elimination of some steps and/or assembly sequences.
It is unde...
view more

    • sale 15% off
    • Standard
      42 pages
      English and French language

IEC 63132-1:2020 The purpose of this part of IEC 63132 is to establish, in a general way, suitable procedures and tolerances for the installation of hydroelectric turbines and generators. This document presents a typical assembly. There are many possible ways to assemble a unit. The size of the machines, design of the machines, layout of the powerhouse and delivery schedule of the components are some of the elements that could result in additional steps, the elimination of some steps and/or asse...view more

    • sale 15% off
    • Standard
      53 pages
      English and French language

This document focuses on recommended condition monitoring techniques for detecting and diagnosing developing machine faults associated with the most common potential failure modes for hydro unit components. It is intended to improve the reliability of implementing an effective condition monitoring approach for hydroelectric generating units (hydro units). It is also intended to help create a mutual understanding of the criteria for successful hydro unit condition monitoring and to foster coopera...view more

    • sale 15% off
    • Standard
      66 pages
      French language
    • sale 15% off
    • Standard
      62 pages
      English language

This document defines the professional technical terms and definitions commonly used for small hydropower (SHP) plants.

    • sale 15% off
    • Standard
      60 pages
      English language

This document specifies the general principles of site selection planning for small hydropower (SHP) projects, and the methodologies, procedures and outcome requirements of SHP plant site selection.

    • sale 15% off
    • Standard
      30 pages
      English language

IEC TS 62600-2:2019 provides design requirements to ensure the engineering integrity of wave, ocean, tidal and river current energy converters, collectively referred to as marine energy converters. Its purpose is to provide an appropriate level of protection against damage from all hazards that may lead to catastrophic failure of the MEC structural, mechanical, electrical or control systems.
This document provides requirements for MEC main structure, appendages, seabed interface, mechanical sys...
view more

    • sale 15% off
    • Technical specification
      86 pages
      English language

IEC TS 62600-301:2019 provides:
· Methodologies that ensure consistency and accuracy in the determination of the theoretical river energy resource at sites that may be suitable for the installation of River Energy Converters (RECs);
· Methodologies for producing a standard current speed distribution based on measured, historical, or numerical data, or a combination thereof, to be used in conjunction with an appropriate river energy power performance assessment;
· Allowable data collection met...
view more

    • sale 15% off
    • Technical specification
      45 pages
      English language

IEC TS 62600-300:2019 provides:
· A systematic methodology for evaluating the power performance of river current energy converters (RECs) that produce electricity for utility scale and localized grids;
· A definition of river energy converter rated capacity and rated water speed;
· A methodology for the production of power curves for the river energy converters in consideration; and
· A framework for the reporting of results.
Exclusions from the scope of this document are as follows:
· REC...
view more

    • sale 15% off
    • Technical specification
      54 pages
      English language

This document applies to laboratory models of any type of impulse or reaction hydraulic turbine,
storage pump or pump-turbine.
This document applies to models of prototype machines either with unit power greater than
5 MW or with reference diameter greater than 3 m. Full application of the procedures herein
prescribed is not generally justified for machines with smaller power and size. Nevertheless,
this document may be used for such machines by agreement between the purchaser and the
supp...
view more

    • sale 10% off
    • Standard
      314 pages
      English language
    • e-Library read for
      1 day

IEC TS 62600-20:2019 establishes general principles for design assessment of OTEC plants. The goal is to describe the design and assessment requirements of OTEC plants used for stable power generation under various conditions. This electricity may be used for utility supply or production of other energy carriers. The intended audience is developers, engineers, bankers, venture capitalists, entrepreneurs, finance authorities and regulators.
This document is applicable to land-based (i.e. onshore...
view more

    • sale 15% off
    • Technical specification
      42 pages
      English language