49.035 - Components for aerospace construction

This European standard specifies the characteristics of adjustable rod-ends consisting of:
- a spherical plain bearing, metal to metal, in corrosion resisting steel, wide series (EN 4265)
- a rod end with internal threaded shank
They are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms

This European standard specifies the characteristics of inch based spherical plain bearing, metal to
metal, in corrosion resisting steel, narrow series.
They are intended for use in fixed or moving parts of the aircraft structure and their control
mechanisms.
They shall be used in the temperature range as determined by the grease capability as below:
— code A: grease as per MIL-PRF-23827 Type I, operating temperature range −73 °C to 121 °C;
— code B: grease as per MIL-PRF-81322, operating ...view more

This European standard specifies the characteristics of inch based spherical plain bearing, metal to metal, in corrosion resisting steel, narrow series.
They are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms.
They shall be used in the temperature range as determined by the grease capability as below:
- code A: grease as per MIL PRF 23827 Type I, operating temperature range −73 °C to 121 °C;
- code B: grease as per MIL PRF 81322, operating te...view more

This document specifies the characteristics of spherical plain bearings in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, wide series for aerospace applications. These self-lubricating spherical plain bearings are intended for use in fixed or moving parts of the aircraft structure especially for control mechanism and operating systems. The bearings are designed...view more

This document specifies the characteristics of spherical plain bearing in corrosion resistant steel, with self-lubricating liner, wide series, elevated load under low oscillations applications. They shall be used in the temperature range -55 °C to 163 °C.

This document specifies the characteristics of spherical plain bearings in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, narrow series for aerospace applications. These self-lubricating spherical plain bearings are intended for use in fixed or moving parts of the aircraft structure especially for control mechanism and operating systems. The bearings are design...view more

This European standard specifies the characteristics of spherical plain bearings in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, narrow series for aerospace applications.
These self-lubricating spherical plain bearings are intended for use in fixed or moving parts of the aircraft structure especially for control mechanism and operating systems. The bearings ...view more

This European Standard specifies the characteristics of spherical plain bearings in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, wide series for aerospace applications.
These self-lubricating spherical plain bearings are intended for use in fixed or moving parts of the aircraft structure especially for control mechanism and operating systems. The bearings ar...view more

This European standard specifies the characteristics of spherical plain bearing in corrosion resistant steel, with self-lubricating liner, wide series, elevated load under low oscillations applications.
They shall be used in the temperature range −55 °C to 163 °C.

This European Standard specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for spherical plain bearings in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions.
This standard applies whenever referenced.
These self-lubricating spherical plain bearings are intended for use in fixed or moving parts of the aircra...view more

This European standard specifies the characteristics of inch based spherical plain bearings, metal to
metal, in corrosion resisting steel, extra wide inner ring inch series.
They are intended for use in fixed or moving parts of the aircraft structure and their control
mechanisms.
The slide hole treatment either at the outer ring or inner ring.

This European standard specifies the characteristics of adjustable rod-ends consisting of:
— a self-aligning spherical plain bearing with self-lubricating liner per EN 6096;
— a rod-end with threaded shank with an optional longitudinal groove for locking purposes.
They are intended for use in fixed or moving parts of the aircraft structure and their control
mechanisms.

This European standard specifies the characteristics of adjustable rod-ends consisting of:
 a spherical plain bearing, metal to metal, in corrosion resisting steel, wide series (EN 4265);
 a rod-end with threaded shank with an optional longitudinal groove for locking purposes.
They are intended for use in fixed or moving parts of the aircraft structure and their control
mechanisms.

This European standard specifies general characteristics of spherical plain bearings in corrosion
resisting steel with self-lubricating liner, extra wide inner ring, inch series.
They are intended for use in fixed or moving parts of the aircraft structure and control mechanisms.

This European standard specifies the characteristics of adjustable rod-ends consisting of:
 a self-aligning ball bearing with self-lubricating liner (EN 4614);
 a rod-end with threaded shank with an optional longitudinal groove for locking purposes.
They are intended for use in fixed or moving parts of the aircraft structure and their control
mechanisms.

This European standard specifies the characteristics of adjustable rod ends consisting of:
 a spherical plain bearing, metal to metal, in corrosion resisting steel, extra wide series (EN 6097);
 a rod–end with threaded shank with an optional longitudinal groove for locking purposes.
They are intended for use in fixed or moving parts of the aircraft structure and their control
mechanisms.

This European standard specifies the characteristics of adjustable rod-ends consisting of:
-   a spherical plain bearing, metal to metal, in corrosion resisting steel, wide series (EN 4265);
-   a rod-end with threaded shank with an optional longitudinal groove for locking purposes.
They are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms.

This European standard specifies the characteristics of adjustable rod-ends consisting of:
-   a self-aligning spherical plain bearing with self-lubricating liner per EN 6096;
-   a rod-end with threaded shank with an optional longitudinal groove for locking purposes.
They are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms.

This European standard specifies general characteristics of spherical plain bearings in corrosion resisting steel with self-lubricating liner, extra wide inner ring, inch series.
They are intended for use in fixed or moving parts of the aircraft structure and control mechanisms.

This European standard specifies the characteristics of adjustable rod-ends consisting of:
-   a self aligning ball bearing with self lubricating liner (EN 4614);
-   a rod end with threaded shank with an optional longitudinal groove for locking purposes.
They are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms.